Daewoo DTD- 21D4, DTD-14D4, DTD-21D3, DTD-14D6, DTD-21D6 Instruction Manual

...

Colour Television

Instruction Manual

MODEL No. DTD -14D3, 20D3, 21D3,21D3TP

14D4, 20D4, 21D4 14D6, 21D6 14D7, 20D7, 21D7 21U6, 21U8

IDENTITY OF FEA TURES ON LOCAL AND REMOTE CONTROL

LOCAL CONTROL

REMOTE CONTROLER

NORMAL

RECALL

MODE

SKIP

14 15

21 22

23 12

17 18 19

SLEEP

PinP

SWAP

POSITION

SIZE TV/VIDEO

CH.LOCK

DELETE

MOVE P.SIZE

TV mode

① ON/OFF ② PR (CURSOR) UP ③ VOLUME UP (CURSOR RIGHT) ④ RECALL ⑤ NUMBER 0~9 ⑥ NORMAL ⑦ SIZE(PIP) ⑧ TV/VIDEO(PIP) ⑨ SOUND MODE ⑩ SOUND SYSTEM ⑪ CH.LOCK ⑫ DELETE(Edit mode) ⑬ MUTE ⑭ VOLUME DOWN

(CURSOR LEFT)

⑮ PR(CURSOR) DOWN ⑯ SLEEP ⑰ AV ⑱ SWAP(PIP) ⑲ PinP ON/OFF(PIP) ⑳ TV/TEXT 󱇽 SKIP(Edit mode) 󱇾 POSITION(PIP) 󱇿 MOVE(Edit mode)

PICTURE SIZE

TELETEXT MODE

① POWER ② PAGE UP ③ SUB PAGE ④ REVEAL ⑤ NUMBER 0~9 ⑥ INDEX ⑦ CANCEL ⑧ Cyan Key ⑨ Yellow Key ⑩ MUTE ⑪ HOLD ⑫ PAGE DOWN ⑬ SIZE ⑭ MIX ⑮ TV/TEXT ⑯ Red Key ⑰ Green Key

MAIN

POWER

BUTTON

VIDEO 2

INPUTRL(MONO)

HEAD

PHONE

STAND-BY

INDICATOR

REMOTE SENSOR

MENU BUTTON

VOLUME DOWN/UP BUTTONS

PROGRAMME

DOWN/UP BUTTONS

TV/VIDEO

REMOTE SENSOR (OPTION)

VIDEO 2

AUDIO

(MONO)

VIDEO 1INMONITOR

OUT

VIDEO

(MONO)

A U D

FRONT BACK

CONTENTS

* Identity of features on Local and Remote Control 1 * Important safeguards 3 * Installation 4

After moving the set 4 Inserting Batteries into the Remote Control Unit 4 Aerial connection 4 Mains connection 4 First installation of TV 4 * Switching the set on and off 5 Switching On 5 Switching Off 5 Language selection 5

* T uning the TV Channels 6

Automatic Tuning System 6 Edit 6 Manual Channel Setting 6 Fine Tuning 7 Select Sound System 7

* Daily use 8

Selecting a Programme Number 8 Sound Control 8 PictureControl 9 16:9 / Zoom 9 Quran function 9 Picture-in-Picture(Option) 10 Timer 10 Sleep 10 Recall 11 Channel Lock 11 Child Lock 11 Local control key Mode 1 1

*Connecting the External Equipment 12 *TELETEXT 12

IMPORT ANT SAFEGUARDS

FEATURES

Water / Moisture: Never install the set in the following places: in the bathroom, in a

wet basement. Do not place any containers with liquid (e.g. flower vases) on the set.

Heat: Never place the set near heat source(e.g. radiator) Ventilation: Do not cover the ventilation openings on the cabinet.

Never place the set in a confined space such as a bookcase or built-in cabinet, unless proper ventilation is provided. Leave a 10cm gap all around the unit.

Object Entry: Do not insert foreign objects, such as needles and coins, into the

ventilation openings.

Lightning Striking:You should disconnect your set from the mains and the aerial

system during thunderstorms.

Cleaning: Unplug the set from the mains before cleaning.

16:9 / ZOOM Screen : You can select a desired 16:9(or ZOOM) screen mode for

movies as well as the normal 4:3 picture mode.

Selectable picture and selectable sound :

Allows one-touch selection of your favorite picture quality and tone quality.

Off-timer and On-timer: Turns off the TV automatically and will turn it back on at a

preset time.

Picture-In-Picture (Option)

Digital-Eye (Option)

Teletext(Option)

INST ALLATION

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for at least 15minutes in order to take out a colour stain on the screen.

INSERTING BA TTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover. Insert the batteries supplied(two 1.5V, type AA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.

Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with 100~250V AC, 50/60Hz.

FIRST INST ALLATION OF TV

If you turn on the TV firstly, LANGUAGE menu will be displayed. Select the language you want with PR up/down button and press MENU button on the Remote Controller. Then blinking of PLEASE WAIT, searching programs, will not stop until EDIT menu appears. In EDIT menu, select the proper sound system with PR up/down,

LEFT/RIGHT button on the Remote Controller. If undesirable pictures are searched, skip the channel. Press MENU button 3 times if you finish the edit programs.

+ 10 hidden pages