Daewoo DDQ-20L6SC User Manual

OWNER’S MANUAL

Model:

•DDQ-20L6SC

TV/DVD COMBO

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and servicing instructions in the literature accompanying the appliance.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE TO CATV SYSTEM INSTALLER

THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE
NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE
CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE
POINT OF CABLE ENTRY AS PRACTICAL.

CAUTION

The AC power cord provided with this product is polarized (one blade wider than the other).
To prevent electrical shock, match wide blade of plug to wide slot, fully insert the AC plug into a standard 120V~,
60Hz polarized outlet.

NOTE

Never connect the plug to an electrical source other than one providing 120V~, 60Hz power. Use only the
attached power cord. If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file the blade.
You are responsible for having the obsolete outlet replaced with a polarized outlet.

If you feel a static discharge when touching the unit, and the unit does not function, simply unplug the unit from the
outlet. When you plug the unit back in, it should work normally.

Do not install power cords near any heating element or cooking appliances.

NOTICE

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copy­right protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disas­sembly is prohibited.

1

IMPORTANT SAFEGUARDS

1 Read Instructions - All the safety and operating instructions should be read before the appliance is

operated.
2 Retain Instructions - The safety and operating instructions should be retained for future reference.
3 Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be followed.
5 Cleaning - Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.
6 Attachments - Do not use attachments not recommended by the TV/DVD manufacturer as they may cause

hazards.
7 Water and Moisture - The apparatus shall not be exposed to dripping or splashing water and that no

object filled with liquids, such as vases, shall be placed on the apparatus.
8 Accessories - Do not place this TV/DVD on an unstable cabinet, stand,

bracket, or table. The TV/DVD may fall, causing serious injury to someone,

and serious damage to the appliance. Use only with a cabinet, stand, bracket,

or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting

of the appliance should follow the manufacturer’s instructions and use a mounting

accessory recommended by the manufacturer. An appliance and cart combination

should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cabinet combination to overturn.
9 Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to

ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or

other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This

TV/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to. Around the unit, the space should be more

than 10cm.
10 Power Sources - This TV/DVD should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or

local power company.
11 Grounding or Polarization - This TV/DVD is equipped with a polarized alternating - current line plug (a

plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a

safety feature. If you are unable to insert the plug fully into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them, paying particular attention to cords at plugs, and the

point where they exit from the appliance.
13 Lightning - For added protection for this TV/DVD receiver during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.
14 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as

contact with them might be fatal.

PORTABLE CABINET WARNING

IMPORTANT SAFEGUARDS

15 Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or

electric shock.
16 Object and Liquid Entry - Never push objects of any kind into this TV/DVD through openings as they

may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the TV/DVD.
17 Servicing - Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18 Damage Requiring Service - Unplug this TV/DVD from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

A. When the power-supply cord or plug is damaged or frayed.

B. If liquid has been spilled, or objects have fallen into the TV/DVD.

C. If the TV/DVD has been exposed to rain or water.

D. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls

that are covered by the operating instructions, as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV/DVD to its

normal operation.
E. If the TV/DVD has been dropped or damaged in any way.
F. When the TV/DVD exhibits a distinct change in performance - this indicates a need for service.

19 Replacement Parts - When replacement parts are required, be sure the service technician has used

replacements parts specified by the manufacturer that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

20 Safety Check - Upon completion of any service or repairs to this TV/DVD, ask the service technician to

perform routine safety checks to determine that the TV/DVD is in proper operating condition.

21 Heat - This TV/DVD product should be situated away from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that produce heat.

22 Electrostatic - In DVD mode, your DVD Disc may be playback from the first parts because of the

electrostatic symptom.

23 Secondary Switch - When switching off, the apparatus is not completely switched off from the mains. To

disconnect it from the mains, you have to unplug mains.

2

LOCATION

For safe operation and satisfactory performance of your unit, keep the following in mind when selection a
place for its installation :

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at

the top and bottom of the unit.
Do not place the unit on a carpet because this will block the ventilation holes.

• Install the unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Do not move the unit from a cold place to a hot place or vice versa (see the warning below).

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an ac wall outlet. grasp it by plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to an

authorized daewoo service center for servicing.

• Do not put your fingers or objects into the TV/DVD Disc holder.

• Do not place anything directly on top of the unit.

WARNING

Mosture condensation may occur inside the unit when it is moved from a cold place to a warm place, after
heating in a cold room, or under conditions of high humidity. if a tape is played in a TV/DVD that has
moisture, it may damage the Disc and TV/DVD. when condensation occurs inside the unit, turn the power on
and allow at least 2 hours for the unit to dry.

FCC WARNING

This equipment may generate or use radio frequency energy. changes or modifications to this equipment may
cause harmful interference unless the modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized change or modification is
made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film, or other copyrighted
material may violate applicable copyright laws. we assume no responsibility for the unauthorized duplication,
use or other acts which infringe upon the rights of copyright owners.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this
device, due to possible eye injury.

CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

3

Precautions in use

Table of Contents

4

IMPORTANT SAFEGUARDS 1
Precautions in use 3
Table of Contents 4
Identification of Controls 5
(Front Panel, Back Panel, Remote Control)

Before use ....

Playing a DVD video disc 25

Basic Playback 25

Special Playback 26
Using DISPLAY Buttons 28
Playing the Desired Scene or
Track during Playback 30

Directly Moving to the Desired Title 30

Playing the Disc, Chapter,

Title, and Track Pepeatedly 31

Repeating the Given Sections 31

Searching by Memorizing the Favorite

Scene 32
Displaying menus in disc 33
Storing viewed DVD settings 34
Changing subtitle Language 35
Changing audio language 36
Using zoom feature 37
Viewing from Another Angle or Producing a
3D SURROUND Effect 38
Random play 39
Program play 40
Playing an MP3 Disc 41
Playing Repeatedly and Editing the Programmed
Mp3 File 43
Initial Settings 44

DVD Operation ....

Basic Installation 10
Connecting to Various Equipment 11

Installation ....

About DVD 53
Before calling service personnel 55
Warranty 56

Others

Watching TV 15
Setting TV 16

To Display the Setting Screen 16
Setting Video 17
Setting Audio 18
Setting Time 19
Setting Set up 20
Setting Special 21

Basic TV operation ....

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

5

Main Body (Front Part)

Identification of Controls

Speaker Left

Disc Loading Tray

Speaker Right

POWER

CH

VOL INPUT

STOP SKIP-PLAY SKIP

+

OPEN/

CLOSE

PLAY

STAND-BY

POWER button (Power of TV/DVD is fully intercepted.)
CHANNEL , button

TV

VOLUME , button
INPUT button : You can select an item from TV, AV1, AV2, DVD.
STAND-BY indicator
REMOTE SENSOR
PLAY indicator
STOP button
SKIP

-

button
PLAY button
SKIP+ button
OPEN/CLOSE button

CONNECTION TO
ANTENNA CABLE

POWER CORD

S-VHS

IN

AV 1INMONITOR

OUT

DIGITAL

AUDIO OUT

(MONO)

L

VIDEO VIDEO

AUDIO AUDIO

RLRDVD

S-VHS IN

COAXIAL DIGITAL
AUDIO OUT jack

AV1 IN

VIDEO
AUDIO(Left/Right)

MONITOR OUT

VIDEO
AUDIO(Left/Right)

ANT

VIDEO

AV2 IN

AUDIO(Left/Right)

CONNECTION

to EARPHONE

jack

Main Body (Rear and Side Part)

6

Identification of Controls

7

Identification of Controls

Remote Control Buttons

POWER button

If you press the ON/OFF button in the front part of this product, power is
on.

DISPLAY button

Operating status and MENU are displayed in a screen.

SLEEP button

You can set automatic POWER OFF.

INPUT button

You can select input mode(TV

-

> AV1 -> AV2 -> DVD).

TV/CABLE button

You can select air or cable.

NUMBER button

You can enter the relevant number directly or select a desired channel.

DVD AUDIO button

You can select the desired audio language.

3D button

You can select NORM or 3D surround.

VOLUME button

TV MENU button

CURSOR( ), CHANNEL SELECT button

This button functions as cursor or channel select button in setting
TV/DVD and operating TV respectively.

MUTE button

Press this button if you only want to turn off the sound.

ENTER button

Press this button if DVD setting is completed.

MENU/PBC button

The DVD menu screen is displayed.

STOP button

SKIP BACK/SKIP FORWARD button

You can skip a screen while playing back or forward.

INPUT

TV/CABLE

DVD AUDIO

3D

M

M

U

T

E

ENTER

SKIP-SKIP+

CH/SELECT

CH/SELECT

8

Remote Control

OPEN/CLOSE

REPEAT

T/C A-B

SETUP

CLEAR

TITLE

SUB-TITLE

ANGLE

ZOOM

RANDOM

PROGRAM

PAUSE/STEP button

Pause screen and step screen are displayed while playing and pausing
respectively.

PLAY button
F.R/STEP or F.F/STEP button

You can search screen while playing back or forward.

DISC TRAY OPEN/CLOSE button
T/C button

You move into REPEAT mode whenever you press this button.

A-B button

You can play the given sections repeatedly.

SETUP button

You can set the DVD player.

CLEAR button

You can clear settings.

TITLE button

You can select the desired title.

SUBTITLE button

You can select the desired subtitle language.

Angle button

You can select the desired screen angle.

ZOOM button

You can zoom in a screen.

RANDOM button

You can play and CD randomly.

PROGRAM button

You can program the desired playing order.

ADD button

You can mark the desired scene.

SEARCH button

You can reach the marked scene.
This button functions as a Marker Search button in DVD.

9

Inserting the Batteries

Remote Control

123

Please respect the environment and prevailing regulations. Before you dispose of batteries, ask your dealer
whether they are subject to special recycling and if he accepts to take them back.

AERIAL SOCKET : (75Ohms-VHF/UHF/cable)

The aerial socket, located at the back of the TV/DVD set, enables the connection of an external aerial or one
from another item of equipment fitted with a modulator (video recorder, satellite receiver, etc.).
(NB: A modulator converts basic video and sound signals to radio frequencies, ‘R.F.’.)

MAINS PLUG:

The mains plug carries the power supply to your TV/DVD set. It should only be connected to an AC supply of
120V ~ 60Hz.

It must not be connected to a DC supply. If the plug is detached from the cable, do not under any
circumstances connect it to a mains socket as there is a danger of electrocution.

S-VHS

IN

AV 1

IN

MONITOR

OUT

DIGITAL
AUDIO OUT

(MONO)

L

VIDEO VIDEO

AUDIO AUDIO

RLR DVD

Connecting the Antenna Cable

10

Basic Installation

Outdoor antenna or

wall antenna outlet

If TV picture is not clear, it usually result from the wrong antenna connection.
Please install the antenna in the proper place and in the right direction.

11

Connecting to Audio System

Connecting to Various Equipment

You can enjoy the stereo sound.

N O T E

• Refer to the owner’s manual of your audio system to connect.

• Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of

the equipment from the wall outlet before making any connections.

• If you place the TV/DVD near a tuner or radio, the radio broadcast sound might be distorted. In this
case, move the TV/DVD away from the tuner and radio.

• The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave
the audio system power on, the speakers may be damaged.

Do not select “Dolby Digital” as Digital Audio Output of this TV/DVD unless you
connect the DIGITAL OUT jack of this TV/DVD to an AV decoder that has the Dolby
Digital decoding equipment.
High volume sound may damage your hearing as well as the speakers.
(Refer to “Selecting Digital Audio Output” on page 51)

Warning!!

VIDEO VIDEO

(MONO)

L

AUDIO AUDIO

S-VHS

RLR DVD

IN

AV 1

MONITOR

IN

OUT

AUDIO

LR

VIDEO VIDEO

DIGITAL

AUDIO OUT

S-VHS

IN

(MONO)

L

AUDIO AUDIO

R
AV 1

IN

L

R DVD

MONITOR

OUT

DIGITAL

AUDIO OUT

Audio Connecting Cable

Connecting to a Camcorder or Other Video Player

12

S-VHS

IN

AV 1

IN

MONITOR

OUT

DIGITAL
AUDIO OUT

(MONO)

L

VIDEO VIDEO

AUDIO AUDIO

RLR DVD

Connecting to Various Equipment

Connection with A/V Jack (AV1 IN)

Connect the AUDIO/VIDEO OUT terminal of your camcorder (or video player) to AV1 IN of TV/DVD with
Video/Audio Connecting Cable.

Connection with A/V Jack (AV2 IN)

Connect the AUDIO/VIDEO OUT terminal of your camcorder (or video player) to AV2 IN of TV/DVD with
Video/Audio Connecting Cable.

VIDEO VIDEO

S-VHS

IN

(MONO)

L

AUDIO AUDIO

R
AV 1

IN

R DVD

MONITOR

OUT

L

DIGITAL

AUDIO OUT

S-VHS

IN

AV 1

IN

MONITOR

OUT

DIGITAL

AUDIO OUT

(MONO)

L

VIDEO VIDEO

AUDIO AUDIO

R

L

R DVD

Audio Connecting Cable

Connecting cable (separate purchase)

13

Connecting to Dolby Digital Amp

Connecting to Various Equipment

You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital
Stereo.
Dolby Digital?
Dolby Digital is the surround sound technology recently used in theatres, and is now available to
reproduce this realistic effect at home. You can enjoy motion picture and live concert DVD video discs
with this dynamic realistic sound by connecting the TV/DVD to the 6 channel amp equipped with a
Dolby Digital decoder or Dolby Digital processor.

Amp equipped with Dolby Digital decoder

1 To enjoy Dolby Digital sound from this TV/DVD, you need the following:

• DVD recorded in Dolby Digital

• 6 channel amp equipped with a Dolby Digital decoder or Dolby Digital processor and power amp

• 5 speakers and 1 subwoofer

2 To enjoy Dolby Digital sound

You need to select “Dolby Digital” in the SETUP menu.

S-VHS

IN

AV 1

IN

MONITOR

OUT

DIGITAL

AUDIO OUT

(MONO)

L

VIDEO VIDEO

AUDIO AUDIO

RLRDVD

14

Connecting to Various Equipment

N O T E

• Refer to the owner’s manual of your audio system to connect.

• Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the

equipment from the wall outlet before making any connections.

• The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio
system power on, the speakers may be damaged.

This product has been manufactured under technical tie-up with Dolby Laboratories.
“Dolby” and the “double-D ” symbol are registered trademarks of Dolby Laboratories.
Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved.

15

W atching TV

1
2

3
4

To turn on the TV, press the [POWER] button in the front part
of the set or the [Power] button on the remote control.

Selecting the Channel.

Press the channel [ , ] button or [Number] button to select the desired
channel. If input status is set to AV or DVD, press the [INPUT] button to
select TV.

Adjusting the Volume.

Press the [ VOL] button to decrease the volume level or [VOL ] button to
increase the volume level.

To turn off the TV, press the [POWER] button on the remote
control.

If power switch of remote control is off, standby LED becomes RED.

CH/SELECT

CH/SELECT

POWER

To Display the Setting Screen

16

1
2

3
4

Press the [TV MENU] button in TV
mode.

TV setting menu is displayed.

Press the [

,

] button to select the desired item.

Current settings and variable settings for the desired item are displayed in the
screen.

• Video

• Audio

• Time

• Set-up

• Special

Press the [

,

] button and press the [,] button to set

the desired item, then press the [

,

] button.

Additional steps may be required as items.

Press the [TV MENU] button to exit the current setting menu.

Setting TV

Main Menu

Video

Audio
Time
Set-up
Special

Select Adjust Exit

M

M

CH/SELECT

CH/SELECT

CH/SELECT

CH/SELECT

M