Daelim S2-125 User Manual

●OPERATOR AND PASSENGER

This motorcycle is designed to carry the operator and one passenger.

●ON-ROAD USE

This motorcycle is designed to be used only on the road.

●READ THIS OWNER'S MANUAL CAREFULLY

Pay special attention to statements preceded by the following words:

Indicates a strong possibility of severe personal injury or death if instructions are not followed.

Indicates a possibility of personal injury or equipment damage if instructions are not followed.

Gives helpful information.

This manual should be considered a permanent part of the motorcycle and should remain with the motorcycle when resold or otherwise transferred to a new owner or operator.

IMPORTANT NOTICE

WARNING

CAUTION

NOTE

SPECIFICATION

········································································

OPERATION INSTRUCTION ····························

SAFETY PRECAUTIONS································

PRIOR TO STARTING VEHICLE ···························

OPERATION ··········································

CORRECT ATTIRE ·····································

CARGO ·············································

MODIFICATION········································

ATTACHMENT ········································

MUFFLER············································

PARTS LOCATION ····································

METER READING AND USAGE ··························

METER ·············································

INDICATOR LAMPS ·····································

SWITCH OPERATION ··································

MAIN SWITCH ········································

START BUTTON ·······································

HEADLIGHT ··········································

WINKER SWITCH ······································

HORN BUTTON········································

PASSING SWITCH ·····································

EQUIPMENT USAGE ···································

STEERING STEM LOCK··································

SEAT LOCK ··········································

TRUNK··············································

DOCUMENT STORAGE AREA ·····························

BAG HOLDER ·········································

CORRECT DRIVING OPERATION ························

STARTING THE ENGINE ·································

IF ENGINE CANNOT BE STARTED ··························

AFTER STARTING ENGINE ·······························

PROPER DRIVING METHODS ·····························

STOPPING ···········································

SELF INSPECTIONS BEFORE OPERATION ···············

INSPECTION OF CONCENED AREA ·························

BRAKE INSPECTION ····································

FUEL CHECK ·········································

TIRE INSPECTION ·····································

ENGINE OIL LEVEL CHECK ·······························

LIGHTS AND WINKER INSPECTION ·························

BULB REPLACEMENT METHOD ···························

REAR VIEW MIRROR ···································

FUEL LEAK INSPECTION ·································

CONTENTS

MAINTENANCE········································

MAINTENANCE SCHEDULE ·······························

MAINTENANCE PRECAUTIONS ····························

BRAKES ·············································

BRAKE HOSE, PIPE LEAKAGE, DAMAGE, ASSEMBLY STATE ·······

BRAKE PAD WEAR ·····································

CHANGING ENGINE OIL ··································

TRANSMISSION OIL INSPECTION ···························

WHEEL REMOVAL ······································

SPARK PLUG ·········································

BATTERY INSPECTION ··································

FUSE REPLACEMENT ···································

COUPLER CONNECTION ·································

AIR CLEANER ELEMENT INSPECTION ·······················

SIDE STAND INSPECTION ································

CABLE RUBBER PART ···································

CLEANING ···········································

STORAGE GUIDE ······································

FRAME AND ENGINE NUMBER ·····························

SAFE DRIVING ········································

PREPARATION BEFORE DRIVING ·····················

DRIVING METHOD ··································

DRIVING POSITION ···································

TAKING POSE OF FELLOW PASSENGER ···················

PRECAUTION WHEN DRIVING ···························

STARTING ·········································

TURNING METHOD ··································

PRINCIPLE OF TURN ··································

EFFECT OF SPEED ···································

3 POSITIONS OF TURNING ·····························

TURNING METHOD ···································

PRECAUTION WHEN TURNING ··························

BRAKING METHOD··································

BASIC PRINCIPLE OF BRAKE(FRICTION FORCE)··············

RESTRAINT OF BRAKING EFFECT (INERTIA)·················

BRAKING METHOD ···································

COMPARISION OF BRAKING DISTANCE ····················

IMPACT WHEN COLLISION······························

WIRING DIAGRAM ·····································

SPECIFICATION

LENGTH×WIDTH×HEIGHT(mm)

WHEEL BASE(mm)

GROUND CLEARANCE(mm)

SEAT HEIGHT(mm)

DRY WEIGHT(kgf)

PASSENGER

ENGINE TYPE

PISTON DISPLACEMENT(cc)

BORE AND STROKE(mm)

STARTING SYSTEM

TRANSMISSION TYPE

2,110×745×1,356

1,481

121

760

141

OIL COOLED/AIR COOLED

4 STROKE 4VALVE

124.9

56×50.7

START MOTOR

V - MATIC

IGNITION SYSTEM

BATTERY CAPACITY

C.D.I

12V10AH(MF TYPE)

120 / 70 - 12 58S

130 / 70 - 12 62S

TELESCOPIC

UNIT SWING OIL DAMPER

HYDRAULIC DISK

CR8EH-9

ITEM DATA ITEM DATA

FR.

RR.

FR.

RR.

FR.

RR.

SPARK PLUG

FUSE(A)

TIRE SIZE

SUSPENSION

BRAKE

FUEL CAPACITY(ℓ)

RESERVE FUEL CAPACITY(ℓ)

2.8

This manual describes matters pertaining to correct operation, safe operation and simple maintenance of the vehicle you purchased. To ensure more comfortable and safer operation, make sure to read this manual carefully prior to operation.

●The photographs and drawings shown in this manual may

differ from those of actual vehicles due to changes in vehicle specifications and modifications made.

●This vehicle is designed for 2 riders including the operator.

●Careful driving and the wearing of proper attire and safety

equipment are the most important factors in the safe operation of the scooter. Please obey traffic regulations and do not be hurried and careless.

●Many new vehicle owners operate their newly purchased

vehicles with great care and attention to safety factors. However, after becoming accustomed to the operations are often discarded, which can lead to accidents. Please don't let this happen to you and always approach the operation of your vehicle with the safety considerations needed. When operating the vehicle, always keep in mind and obey the notes of precaution printed on the “Safety Precaution Label” attached to the vehicle.

OPERATION INSTRUCTION

SAFETY PRECAUTIONS

CAUTION

●Do not use polluted gasoline.

Using polluted gasoline will cause rust inside the fuel tank, and will close the supply of fuel to the carburetor, leading to an improper engine starting or may cause serious damage to an engine.

●Do not use polluted or low-grade oil.

Always use genuine oil to protect and extend vehicle performance and its life span.

●If any failure occurs due to the use of polluted

gasoline or oil, such failure will be excluded from being eligible for repairs under the warranty.

●Always wear helmet.

●Always put on gloves.

●Observe posted speed limits.

●Park vehicle away from people(especially

children) as the muffler can get very hot.

●For safety, do not illegally modify the vehicle.

●Regularly conduct specified maintenance

inspections. <Maintenance Inspection Points> Brakes, Tires, Oil, Lights, Horn, Instruments

●Read user's manual carefully.

●Conduct maintenance checks prior to operation.

●Always maintain vehicle in clean status and carry out specified

maintenance checks.

●Make sure to stop engine and stay away from fire when

fueling.

●Exhaust gas contains harmful substance such as carbon

monoxide. Start engine in well-ventilated places.

●Operators should naturally fix bodies to keep smooth driving.

●Please check whether or not you are unnaturally strained and

strung up.

●Driving pose has a great influence on safe operation.

Please always maintain the center of your body in the middle of seat. Especially do not sit at the rear seat because it may lessen the weight of front wheel and cause trembling steering wheel.

●A passenger should hold on to the vehicle or the operator with

both hands and keep both feet on the pillion step bar.

●When wanting to turn, slightly lean to body toward the

direction of the turn. It is unsafe if the body is not moved in union with the vehicle.

●Curvy roads and poor, unpaved roads constantly change in

surface quality. Driving on these roads can be unsafe if certain safety precautions are not followed.

●In order to safely drive through these driving conditions,

anticipate coming road conditions, slow down to at least half the normal speed, and relax your shoulders and wrists while securely holding the handles.

PRIOR TO STARTING VEHICLE OPERATION

●Always make sure to wear helmet for safety. Wear gloves and

safety goggles.

●Do not wear uniforms which might hinder operation. It is

dangerous if the uniform is caught by brake lever or by the rotating part of drive chain.

●Many automobile/motorcycle accidents happen because the

automobile driver does not “see” the motorcyclist. Make yourself conspicuous to help avoid the accident that wasn’t your fault :

- Wear bright or reflective clothing.

- Don’t ride in another motorist’s “blind spot”.

CORRECT ATTIRE

A helmet should always be worn and the helmet chin strap should be securely fastened.

Always put on gloves.

Correct shirts or jackets with tight-fitting sleeves should be worn,

Shoes should fit properly, and shoes having little or no heel should be worn.

●When carrying cargo, you must keep in mind that operating the

motorcycle, especially when turning, will be different.

●Make sure not to overload the motorcycle with goods as this

can make the motorcycle unstable during operation.

●Modification of vehicle structure of function deteriorates

manipulate or causes exhaust noise to become louder shortening the vehicle life. These modifications are not only prohibited by law but also are the acts harmful to other people. Modifications are not covered by warranty.

●Except designated attachment by DAELIM MOTOR CO.,

LTD., don't attach any extra lighting device, because it may cause an early discharging of battery.

●Pay particular attention to fellow passenger so that he/she can

prevent getting burnt by the hot muffler during travel.

CARGO

CAUTION

●Only load cargo in or on designated areas as

placing or fastening cargo to other areas can cause damage to the vehicle.

●Do not place articles between the frame body

cover and engine as this can burn the goods.

TRUNK MAXIMUM LOAD : 10kg

ATTACHMENT

MUFFLER

MODIFICATION

PARTS LOCATION

PILLION STEPREAR BRAKE DISK

MUFFLER

BATTERY

BAG HOLDER

FUSE

FR. BRAKE LEVER

REAR VIEW MIRROR

TIRE

PARTS LOCATION

HEADLIGHT

FR. FENDER

FR. CUSHION

SIDE STAND

SIDE STAND SWITCH

MAIN STAND

FR. BRAKE DISK

BRAKE CALIPER

RR. BRAKE LEVER

FUEL TANK LID

MAIN SEAT

PILLION SEAT

REAR COMBI. LIGHT

AIR CLEANER

Indicates driving speed. Maintain legal speed limits to ensure safe operation.

Indicates total distance in kilometers travelled by the vehicle.

The fuel meter indicates the gasoline level inside the fuel tank. Gasoline should be put in the fuel tank as soon as possible if the needle is resting in the red area.

FUEL TANK CAPACITY : 11

ℓℓ

RESERVIOR CAPACITY : 2.8

ℓℓ

When the winker switch is operated, the winker indicator flashes in union with the flashing of the turn signals.

METER READING AND USAGE

METER

INDICATOR LAMPS

SPEEDOMETER

FUEL METER

HEADLIGHT HIGHBEAM INDICATOR

WINKER

INDICATOR

WINKER

INDICATOR

ODOMETER

ODOMETER RESET BUTTON

1. ON.... Starts engine. Key can not be

pulled out.

2. OFF....Stops engine. Key can be

placed in or taken out of the main switch.

3. LOCK....Locks handle bars. Key can be

placed in or taken out of the main switch.

4. OPEN....When seat lock is released,

key returns to its original position(OFF). Key can be placed in or taken out of the main switch.

CAUTION

●Do not manipulate main switch key

during operation. If the main switch key is placed on “Off” or “Lock” position, all electrical system will not function. Never operate the main switch key during travel as it might cause unexpected accidents. If it is necessary to remove the main switch key, stop the vehicle first prior to removing.

CAUTION

●When you park the vehicle and

leave it, please lock handle bars and take out the key.

●It can be locked up in the main stand

using supplementary device (Buglarproof)

●If the key is left in “ON”position

without starting engine, battery is discharged.

●Rotate key smoothly without

pressing to turn to OPEN.

●Do not use a number of keys

together with a metal key holder. The keys and the key holder may cause scratches or other damage to the cover while operating the vehicle. (Recommend cloth or leather key

holders)

MAIN SWITCH

SWITCH OPERATION

MAIN SWITCH

KEY

The engine is started pressing this button when pressed in a state where the main switch key is placed to an ON position and the brake lever is pulled.

Put main switch key in “ON” position and turn on headlight switch.

High beam or low beam can be operated by the use of dimmer switch.

HIGH BEAM

...... used when needing extra

light.

LOW BEAM

...... used when other vehicles

are present, in the city, etc.

HEADLIGHT

CAUTION

●The engine will not start if the brake

lever is not pulled.

●Do not hold the brake lever and

pull the throttle grip when the engine was started. It may damage the engine.

CAUTION

●Use the high beam only in the

suburban road or when the usage of the high beam not hinder the safe driving of the car ahead.

START BUTTON

DIMMER SWITCH

START BUTTON

SWITCH POSITION FUNCTION

Headlight, taillight, position lamp and meter lights on.

Position lamp, taillight, and meter lights on.

Light turned off.

(OFF)

(P)

(H)

(LO)

(HI)

HEADLIGHT SWITCH

If this switch is turned on when the main switch is in an ON position, the winker will operate.

󳫻 (R)....used when making a right turn.

󳫺 (L)....used when making a left turn.

The horn is sounded if the horn button is pressed when the main switch is in an ON position.

Push the button 2~3 times when you need to call driver’s attention.

CAUTION

●The winker switch does not auto-

matically turn back to its original position after completing the turn. Please set the switch back to its center position after turning.

WINKER SWITCH

HORN BUTTON PASSING SWITCH

PASSING SWITCH

WINKER SWITCH

HORN BUTTON

To lock the steering, turn the handlebars all the way to the left, turn the key to LOCK while pushing in. Remove the key.

To unlock the steering, turn the key to the OFF position.

●The seat automatically locks when the

seat is pushed in its downward position,

●Lightly pull upward on the seat to make

sure the seat has been properly locked.

●Turn the main switch key from OFF to

OPEN to open the seat.

STEERING STEM LOCK SEAT LOCK

EQUIPMENT USAGE

STEERING STEM LOCK

KEY

STEERING STEM LOCK

WARNING

●Do not turn the key to LOCK while

riding the vehicle; loss of vehicle control will result.

CAUTION

●As the seat automatically locks, take

special care not to accidently leave the key in the trunk.

●Make sure that the seat is securely

locked after closing the seat. Driving with unlocked seat lock may cause danger.

●When the seat lock is out of order, do

not operate it further and inspect it in the closest authorized repair center.

●There is a trunk under the seat.

●The seat is opened to gain access to the

trunk by using the main switch key on the seat lock.

●The lamp inside the trunk will be turned

on if the seat is opened.

TRUNK MAXIMUM LOAD:10kg

●There is a document storage area on the

bottom of the seat.

●Store the owner’s manual and the

maintenance notebook in this area.

●For ease in carrying bags and similar

items, they should be hung from the bag holder which is fitted for this purpose.

●When using the bag holder, place it in

the open position and return it to the normal position when not in use.

TRUNK DOCUMENT STORAGE AREA BAG HOLDER

CAUTION

●As water can enter the trunk when

washing, make sure to remove articles that can be damaged by water.

●Do not load uncloseable size of

helmet and thing in the tunk, otherwise, the battery can be discharged with the trunk lamp on.

CAUTION

●Do not attempt to carry very heavy or

bulky loads since this would affect the stability and steering characteristics of the scooter.

CAUTION

●The temperature inside the trunk

rises due to heat from the engine. Do not place foodstuffs and other articles that can be damaged easily by heat. Also do not place flamm-able materials in the trunk.

●Do not place valuable or fragile

goods in trunk.

TRUNK

DOCUMENT STORAGE AREA

BAG HOLDER

●Make sure to check the oil, gasoline,

etc., before starting the engine.

●Please ensure that the main stand is in a

down position when starting the engine.

●Drive with care for both safety reasons

and longer vehicle life.

●For 1 month (or 1,000km) after pur-

chasing the vehicle, drive moderatly avoiding fast starts and fast acceleration

Always follow the proper starting procedure described below.

●This motorcycle is equipped with a side

stand ignition cut-off system.

●The engine cannot be started if the side

stand is down.

●Always be ensure that you operate the

engine starting controls with the scooter on its stand.

CORRECT DRIVING OPERATION

STARTING THE ENGINE

CAUTION

●Make sure that the rear wheel is

locked when starting the engine to prevent an unexpected quick start of the vehicle.

●Locking is not possible if the rear

wheel brake is not adjusted correctly.

WARNING

●Never run the engine in an enclosed

area. The exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness and lead to death.

●While the scooter is on its stand you

should NEVER apply full throttle:if the rear wheel touches the ground the scooter would set off at full speed. (Remember that the scooter has a centrifugal automatic speed control)

󳠿 Lock the rear wheel.

󳡀 Turn the main switch to an ON

position.

󳡁 Start engine with cell button.

●Press the starter button without rotating

the starter grip (opening the throttle).

●If the engine is hot and does not start

after pressing the starter button for 3~4 seconds, rotate the throttle grip to 1/8~1/4 of a rotation and try again. This will allow easy starting

CAUTION

●Immediately release the starter button

as soon as the vehicle has started.

●Do not press the starter button when

the engine is running. This can damage the starting motor.

1/4

1/8

●It is possible that starting will be more

difficult if the vehicle has not been used for a long period of time or if the fuel hole is plugged up(starting problems even when there is sufficient fuel in the fuel tank may be an indication of a plugged fuel hole). When this happens, do not rotate the throttle grip and try the starter button a few times.

󳡂 When the engine is cold morning or

winter or the vehicle has not been used for a long period of time, let the engine idle for a short period allow the engine to warm up.

If engine cannot be started or vehicle does not move, check the followings.

●Is there fuel in fuel tank?

●Are you operating in accordance with

the instructions given in owner’s manual?

●Is fuse not cut?

●Is starter motor running?

IF ENGINE CANNOT BE STARTED

CAUTION

●Keep holding rear brake until start.

●Exhaust has contains harmful subs-

tance such as carbon monoxide. Start engine in well-ventilated places.

CAUTION

●Do not keep the statter button pressed

for more than 5 seconds at a time. Release the starter button for approximately 10 seconds before pressing it again.

+ 46 hidden pages

Daelim S2-125 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual