CompuSTAR P2BSHLEDR User Manual
User Manual
By Firstech LLC, Version: 1.1
Applicable to the following remote(s);
Pro 2BSHLEDR (2-Way 2 Button LED
Remote)
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
(1) This device may not cause harmful interference.
(2) This device may accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
WWW.COMPUSTAR.COM
1
Table Of Contents
Introduction............................................................................................................................................3
Kit(s) Contents .......................................................................................................................................3
Warranty Coverage................................................................................................................................3
Remote Reference .................................................................................................................................3
Quick Reference.....................................................................................................................................4
Valet Mode.........................................................................................................................................4
Remote Maintenance – Battery Replacement ...................................................................................4
Two-Way Remote: Pro 2BSHLEDR.......................................................................................................4
2 Button Remote Functions................................................................................................................4
General System Functions....................................................................................................................5
Sending Commands...........................................................................................................................5
Receiving Commands........................................................................................................................5
Active Lock/Arm and Unlock/Disarm..................................................................................................5
Automatic Transmission Remote Start Function................................................................................5
Manual Transmission Remote Start Function (Reservation Mode)....................................................5
Activating Reservation Mode .............................................................................................................6
Cancelling Reservation Mode ............................................................................................................ 6
Reservation Mode Settings................................................................................................................6
Trunk Release....................................................................................................................................6
Auxiliary Outputs/Window Roll-Down/Sliding Doors ..........................................................................6
Anti Grind/Starter Kill..........................................................................................................................7
Secure Valet Switch...........................................................................................................................7
Remote Coding / Programming Routine(s) .........................................................................................8
Programming P2BSHLEDR ...............................................................................................................8
Remote Start Error Diagnostic .............................................................................................................8
Limited Lifetime Warranty.....................................................................................................................9
Notes:....................................................................................................................................................10
2
Introduction Introduction
Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of
Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of
this system, we recommend that you fully review the following manual. Please note that this manual
this system, we recommend that you fully review the following manual. Please note that this manual
applies to the Pro 2-Way 2 Button Remote Starter system only. The P2BSHLED-S offers keyless entry
applies to the Pro 2-Way 2 Button Remote Starter system only. The P2BSHLED-S offers keyless entry
and remote start. There may also be features listed in this manual that require additional installation or
and remote start. There may also be features listed in this manual that require additional installation or
programming before they can become active. If you have any questions, please contact the original
programming before they can become active. If you have any questions, please contact the original
place of purchase. For further information you may also contact our customer support center by calling
place of purchase. For further information you may also contact our customer support center by calling
888-820-3690.
888-820-3690.
Kit(s) Contents Kit(s) Contents
- 1 x Pro 2BSHLEDR Remote - 1 x Pro 2BSHLEDR Remote
- Starter Only Control Module - Starter Only Control Module
- 1 x ANT-2WSH Antenna - 1 x ANT-2WSH Antenna
- 1 x Hood Pin - 1 x Hood Pin
Warranty Coverage Warranty Coverage
Caution:Caution:
authorized CompuStar Pro dealer. For complete warranty details visit www.compustar.com
page of this manual.
Warranty registration can be completed online by visiting www.compustar.com
registration form within 10 days of purchase. We no longer include a mail-in warranty registration card
with each unit – registration must be done online. To verify that an authorized dealer installed your
system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer
invoice in a safe place.
The Manufactures warranty will be voided if this product is installed by anyone other than an
or the last
. Please complete the
Remote Reference
3
P2BSHLEDR (2-Way 2 Button Remote)
Applicable to the following models;
- P2BSHLED-S (remote start only)
Quick Reference Quick Reference
Valet ModeValet Mode
When servicing or loaning your vehicle to others, the CompuStar Pro system should be placed in Valet
mode. Valet mode prevents the system from remote starting and disables all alarm functions.
IMPORTANT: While in Valet mode the CompuStar Pro will still lock and unlock power lock systems.
The system can be put into valet one of three ways;
1. Turn the vehicles key to the ignition “on” position and tap lock/unlock and key/start buttons
simultaneously for 0.5 seconds. The parking lights will flash once and the remote will beep and
LED flash once to confirm the system is in valet mode. Repeat this process to take the system
out of valet mode. The parking lights will flash twice and remote will beep twice and LED flash
twice to confirm the system is out of valet mode.
2. You can put the system into valet by turning the ignition key “on” and then “off” five
times within 7 seconds. The parking lights will flash once to confirm the system is in
valet mode. Shortly after the first flash, the parking lights will flash twice.
3. (Optional Feature) If your system is set up for a secure valet option, you will not be able to put the
system into valet until the proper code has been entered with the secure valet switch.
Remote Maintenance – Battery Replacement
The only regular maintenance this system requires is remote control battery replacement.
No programming is required when replacing the battery.
Two-Way Remote: Pro 2BSHLEDR
First, remove the two small screw covers and Phillips screws located on the back of the remote. Once
the screws have been removed, gently pull the remote apart being careful to not touch the circuit board.
The P2BSHLEDR requires two CR2025 batteries. These specialty batteries can be purchased from your
local CompuStar dealer or an electronics store.
2 Button Remote Functions
Additional
Button Duration
0.5
seconds
2.5
+
seconds
0.5
seconds
2.5
seconds
0.5
seconds
2.5
seconds
4
Programming
Required
no Lock/Arm. Tap again to Unlock/Disarm the vehicle
no
yes, POC
programming
no Activates the remote start. Repeat and remote start will shut off.
no Valet mode (see above for details)
no Panic mode. Honks horn and flashes parking lights. (Optional)
Function / Description
Trunk pop. Triggers the trunk release output and opens the
vehicles trunk.
Aux 1. Triggers the auxiliary 1 output (most commonly used for
rear defrost or window roll-down).
Loading...