Page 1
8102REUCL001300 // FT-2WT11R Guide REV1
QUICK START CARD
2WT11R-SS
Firstech, LLC. | 1
A tap of this button will lock your doors and/or arm your Compustar alarm.
A tap of this button will unlock your doors and/or disarm your Compustar alarm.
Holding this button for 2.5 seconds will pop your trunk, if equipped. If not, ask your
Compustar Dealer for details on how to get it.
Holding this button for 2.5 seconds will start your vehicle. The 2WT11R-SS will receive a
page back alert and run time countdown timer will start. Run Time Extension: If enabled,
double tapping this button will reset your remote start run time or turbo timer.
Tapping these two buttons will mute and unmute the siren on your Compustar
alarm. Holding them for 2.5 seconds will turn the Shock Sensor on or off.
Function Button: This button is used to access advanced remote functions. Please
see the following table for more info.
Wake/Mute Button: Tap this button to wake the screen. Hold this button for 2
seconds to mute your remote. Hold for 2 seconds to unmute.
Rechargeable Battery: Your 2WT11R-SS is
equipped with a rechargeable battery. Use
the included FT-USB CHARGER to charge
your remote. We recommend charging
your remote before first use. Charge time is
approximately 2 hours.
Register online at www.compustar.com
within 10 days of purchase to activate your
new remote’s warranty.
Then
Press
2.5 Sec 2.5 Sec
1 x
Drive Lock
On/Off
Turbo Timer
On/Off
Auxiliary 1 Auxiliary 2 Auxiliary 3 Auxiliary 4
2 x
2nd Car
On/Off
Timer Start
On/Off
Auxiliary 5 Auxiliary 6 Auxiliary 7
3 x
Valet Mode
On/Off
Passive Mode
On/Off
FUNCTION BUTTON TABLE
2WT11R-SS_QuickCard line.indd 1 2015/7/23 8:59:19
Page 2
FEATURE
LCD
READOUT
FUNCTION/DESCRIPTION
Alarm On/
Off
Alarm On or Off Turns the alarm clock on or off
Button Lock Hold
Auto or
Manual
Turns automatic button lock feature
on or off. If on, you must tap a button
to wake your remote up. Then hit the
function you would like to trigger.
RPS Call
On/Off
Call On or Off
Turns your RPS Touch paging feature
on or off.
Silent Vibrate On or Off
Turns the silent mode on or off.
Volume VOL: 1 - 3
Adjust the volume of your remote.
1 is the lowest. 3 is the highest.
Temperature Temp F or C
Changes the temperature readout
from Fahrenheit to Celsius.
Auxiliary AUX On or Off
Turns your Auxiliary Extender feature
on or off.
2 Way
Paging
Display
Paging
Full or
Half
Sets your remote for Alarm or Starter
Only systems. Set to FULL for ALARM
IT and MAX IT features. Set to HALF
for START IT ONLY systems.
Screen
Timeout
Screen
Adjusts
screen off
time
Adjusts the time your LCD will stay on
after a button is pressed
Language
English /
Francais /
Espanol
Adjusts
Language
Changes LCD display language from
English to French or Spanish
FEATURE
LCD
READOUT
FUNCTION/DESCRIPTION
Enter
Remote
Menu
2.5 Seconds
Enter and Exit the Remote Option
Menu
Move
Through
Menu
Moves down the Remote Option
Menu
Move Up
Menu
Moves back up the Remote Option
Menu
Clock
Adjusts
Hour
Adjusts
Minute
Sets the time on your remote
Remote Start
Time
Adjusts
Hour
Adjusts
Minute
Sets the time at which you want your
vehicle to start every day. Check with
your installer for additional info.
Alarm Clock
Time
Adjusts
Hour
Adjusts
Minute
Sets the time in which you would like
the remote’s alarm clock to alert you.
REMOTE OPTION MENU
Firstech, LLC. | 2
QUICK START CARD
2WT11R-SS
To reprogram your remote, cycle the key in the ignition 5 times within 7
seconds. Parking lights will flash. Then tap the Lock button on your remote.
Repeat for any additional remotes. If you receive two parking light flashes,
your Compustar has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to 5 PM PST.
Also please visit www.compustar.com for a complete user’s manual.
2WT11R-SS_QuickCard line.indd 2 2015/7/23 8:59:23
Loading...