CompuSTAR 2WSH-LED User Manual

2WSH-LED USER’S GUIDE

___________________________________________________________________________________________________________________

T

HANK YOU

Thank you for purchasing a CompuStar alarm and/or remote start system. CompuStar alarms and remote start systems are the most advanced
systems on the market with amazing features, incomparable ease of use, and breakthrough technologies never before utilized in the automotive
environment. Please take time to read and understand this owner’s manual so that you can enjoy your new CompuStar system.

___________________________________________________________________________________________________________________

B

UTTON FUNCTIONS

If you purchase a Starter or Alarm only system then you will not have all the functions listed below. An Alarm/Starter Combo system will have
all of the functions listed below depending on vehicle. When tapping the button commands below the LED icons will blink briefly as well as
beep to confirm that specific function.

Button 0.5 sec 2.5 sec LED Icon

+

Locks and Arm Lock then Panic

Unlocks and Disarm

Aux 1 Trunk Release

Aux 2 Remote Start On/Off

Siren On/Off

Option Programming Menu #1 – Installer
Only

+

+

+

+

+

Valet Mode On/Off Shock Sensor On/Off

Passive Arming On/Off

Timer Start On/Off

Turbo Mode On/Off Query Mode

Option Programming Menu #2 – Installer
Only

1

__________________________________________________________________________________________________________________

B

UTTON FUNCTION DESCRIPTIONS

Lock Button (0.5 Sec.) – Tapping this button for a split second will lock/arm your CompuStar system. Your

+

+

parking lights will flash once when you tap this button.

Lock Button (3.5 Sec.) – This button activates the panic mode on your system when held down for 3.5
seconds. Holding down the Lock button for 3.5 seconds will panic the siren. You can turn panic mode off
by tapping the Unlock button. This Panic mode will also activate the Anti-Jack mode. The Anti-Jack mode
will require additional installation. See Anti-Jacking under Additional Features below.

Unlock Button (0.5 Sec.) – Tapping this button for a split second will lock/arm your CompuStar system.
Your parking lights will flash twice when you tap this button.

Trunk Button (0.5 Sec.) - Tapping the Trunk button activates Aux 1. This can be used to activate side
doors, window modules, etc. By default, the Key button can only be activated as Secure Aux to prevent
accident activation. Click IV before you activate the Trunk button. This can be changed – ask your installer.
You may want to keep Secure Aux if you connect Aux to open side doors.

Trunk Button (2.5 Sec.) – When you hold the Trunk button for 2.5 seconds you can release your trunk. By
default when you release the trunk the CompuStar will also disarm and unlock the doors.

Circle Button (0.5 Sec.) - Tapping the Circle button activates Aux 2. This can be used to activate side
doors, window modules, etc. By default, the Circle button can only be activated as Secure Aux to prevent
accident activation. Activate Secure Aux by holding the Trunk and Circle buttons for 2.5 seconds before
activating the Circle button. This can be changed – ask your installer. You may want to keep Secure Aux if
you connect Aux to open side doors.

Circle Button (2.5 Sec.) – Holding the Circle Button for 2.5 seconds activates the remote start feature on
your system. The vehicle will flash the parking lights once. Once the vehicle is remote started then the
parking lights will come on solid. You have the option of having your parking lights flash during remote
start. Holding the Circle Button again for 2.5 seconds while your vehicle is remote started will deactivate
the remote start and flash the parking lights twice.

Lock Button + Unlock Button (0.5 Sec.) – Siren On/Off – Tapping these two buttons at the same time will
mute the siren chirps during arm/lock and disarm/unlock. This feature will also mute the siren when the
siren is set to 20 chirp silent siren. Your parking lights will flash once when you tap this button to turn this
feature off and twice to turn this feature on.

Valet Mode - There are two different ways to enter Valet mode.

1)

Lock and Trunk Buttons together for a half second while the vehicle’s ignition is on. Your installer
can change these settings so that you do not have to turn ignition on. Your parking lights will flash once
when you tap these buttons to turn this feature on and twice to turn this feature off.

2)

Ignition On and Off for 5 times with key

+

Lock + Trunk Button (2.5 Sec.) – When you hold these two buttons together for 2.5 seconds you can
disable your shock sensor. Your parking lights will flash once when you tap these buttons to turn this
feature on and twice to turn this feature off. This also disables any other added sensors such as radar,
proximity or tilt sensors.

2