CENTRAL BRASS 0336-3-8 User Manual

MODEL NO. 0336-3/8

Central Brass

C O M P A N Y

SLOW CLOSING

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

The slow closing straight stop has a cast brass body with

a polished chrome plated nish. The brass push button
handle is used to make the external adjustment to the
cycle time. The button is then locked at the time setting

with a set screw. The factory on time is set at the factory
to approximately 3-1/2 seconds. Longer cycle time is pos-

sible with internal adjustments. All of the internal parts are

brass or stainless steel. The seals and O-Rings are EPDM

rubber. The bonnet gasket is nylon.

ASME A112.18.1M

STRAIGHT STOP

Installation Drawing

8-25-08

MODEL NO. 0336-3/8

Central Brass

C O M P A N Y

SLOW CLOSING

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

STRAIGHT STOP

Parts Breakdown

# Part # Description
1 7049-M Brass Body
2 59-APS Brass Seat
3 1028-Y Nylon Gasket
4 170-K Stainless Steel Screw
5 170-H Brass Washer
6 170-J Felt Washer
7 170-P Gasket
8 PF-170-E Brass Dashpot
9 PF-170-N Brass Nut
10 279-L Brass Washer
11 170-CW Cup Washer
12 PF-170-D Brass Holder
13 170-F Seat Washer
14 353-S Celcon Sleeve
15 PF-170-C Brass Stem
16 1038-CRN O-Ring
17 PF-170-B Brass Bonnetq
18 170-L Stainless Steel Spring
19 PF-170-AP Brass Cap
20 103-HS Stainless Steel Set Screw
21 170-WA Steel Hex Wrence

The parts listed in the parts breakdown above may not be
offered separately as replacement parts. Please review the

Replacement Parts page for the authorized replacement parts

that are available for this item.

8-25-08