CENTRAL BRASS 0287-GSA-Q User Manual

MODEL NOS.

Central Brass

C O M P A N Y

Certified to
ANSI/NSF 61 Section9

0287-GSA 80287-GSA

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

O-Ring Compression 1/4-Turn Compression Ceramic Units
0287-GSA 0287-GSA-Q 80287-GSA

The bar faucet has a cast brass body that is copper, nickel and chrome plated. The stems are all brass,
with a double O-Ring seal and rubber seat washer (for compression stems) or ceramic sealing discs (for

ceramic units). The canopy handle is zinc die cast with a chrome plated nish. The swivel gooseneck
spout is brass with a chrome plated nish and is tted with a water saving aerator that limits the ow rate.

The O-Rings and seals are rubber. The 3/8” diameter supply tubes are threaded into the shank.

Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M

ANSI/NSF 61/Section 9 Certied

0287-GSA-Q

BAR FAUCET

Installation

Drawing

8-05-08

MODEL NOS.

Central Brass

C O M P A N Y

0287-GSA 80287-GSA

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

Handle variations available

ELS - Sufx

Wrist 4-inch

EL - Sufx

Elbow 6-inch

G-4147 (4-inch)
G-4149 (6-inch)

0287-GSA-Q

BAR FAUCET

Faucets with lever, wrist or el­bow handles with compression
or ceramic stem cartridges are

ADA compliant.

8-05-08