CENTRAL BRASS 0084-A1 User Manual

Brecksville, Ohio 44141

Central Brass

C O M P A N Y

Phone: [phone] Fax: [phone]

www.CentralBrass.com

The 4-inch center topmounted bar/laundry faucet has
a cast brass body that is copper, nickel and chrome
plated. The compression stems are all brass with
a double O-Ring seal and rubber seat washer. The
canopy handles are zinc die cast with a chrome

plated nish. The 8-inch swivel spout is brass with
a chrome plated nish and is tted with a water
saving aerator that limits the ow rate. The O-Rings

and seals are rubber.

Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M

ANSI/NSF 61/Section 9 Certied

MODEL NO. 0084-A1

BAR/LAUNDRY FAUCET

Installation Drawing

7-02-08

Brecksville, Ohio 44141

Central Brass

C O M P A N Y

Phone: [phone] Fax: [phone]

www.CentralBrass.com

# Part # Description

1 4015-BARP Brass Coupling Nut

2 7133-AZ Zinc Dichromate Locknut

3 54 Steel Crowfoot Washer

4 2103-B Brass Faucet Body

5 263-BC Bronze Seat

6 1028-Y Nylon Gasket

7 104 Brass Seat Washer Screw

8 901-WNN Seat Washer

9 453-FL Brass Left Thread O-Ring Stem

9 453-FR Brass Right Thread O-Ring Stem

MODEL NO. 0084-A1

BAR/LAUNDRY FAUCET

Parts Breakdown

# Part # Description

10 1038-453 O-Ring

11 453-EWC Brass Left Thread O-Ring Bonnet

11 453-EWH Brass Right Thread O-Ring Bonnet

12 523-C Handle Indexed “C”

12 523-H Handle Indexed “H”

13 107-F Brass Phillips Head Screw

14 1038-KN O-Ring

15 166-FN Stainless Steel Snap Ring

16 PF-782-D Brass Spout Nut

17 PF-2924 Brass Swivel Spout

18 30-M Female Aerator

19 SU-453-EL Left Thread O-Ring Stem Assembly

19 SU-453-ER Right Thread O-Ring Stem Assembly

The parts listed in the parts breakdown above
may not be offered separately as replacement
parts. Please review the Replacement Parts
page for the authorized replacement parts that
are available for this item.

7-02-08