Carmelli NG2558M, NG2558W User Manual

UNITY SPECTATOR BENCH

ASSEMBLY INSTRUCTIONS

Please Do Not Hesitate to

Contact Our Consumer Hotline

at

800-759-0977

with Any Questions That May

Arise During Assembly or

Use of This Product!

Ver. 0616

NG2558

THANK YOU!

Thank you for purchasing this product. We work around the clock and around the globe to ensure

that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.

ASSEMBLY TIPS

IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS

IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this bench. You may want to carefully cut or tear the four corners of the box

so that the bottom of the box can be used as your work surface.

2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts

List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.

3. Some figures or drawings may not look exactly like product.

4. When installing parts that have more than one screw or bolt, hand tighten all screws or bolts

in place before final tightening with screwdriver or wrench.

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS

NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

CARE AND USE

1. This product is intended for INDOOR use only.

2. Do NOT drag the bench when moving it, as this will damage the legs.

2

UNITY SPECTATOR BENCH - NG2558

Parts List

NGP60711 (M or W)* NGP60741 (M or W)*

P1

NGP60721 (M or W)*

P2 P3 P4

NGP60731 (M or W)*

x1 x2 x2 x2

Bench Top

NGP60761 (M or W)*

P5

P6

x16

Wood Plug

NGP60751**

H3

H4

x4 x4

1/4” x 1-1/4” Bolt

*Use M (mahogany) or W (walnut) after
part number to specify your wood color.

**Items included in Hardware Pack, NGP60751

Side Leg Beam Middle Leg

Foot Pad

NGP60751**

x6

NGP60751**NGP60781

H1

x16

1/4” x 1-1/2” Bolt 1/4” x 3/4” Bolt

NGP60751**

H5

NGP60751**

H2

x1

1/4” Washer

Allen Wrench

Illustrations Not to Scale

x2

6/16

For replacement parts please call 800-759-0977.

3