Carmelli NG2535P Assembly Guide

NEWPORT 7-FT POOL TABLE SET

ASSEMBLY INSTRUCTIONS

Please Do Not Hesitate to

Contact Our Consumer Hotline

at

800-759-0977

with Any Questions That May

Arise During Assembly or

Use of This Product!

NG2535P

THANK YOU!

Thank you for purchasing this product.

We work around the clock and around the globe to ensure that our products

maintain the highest possible quality. However, in the rare case of issues

during assembly or use of this product, please contact our Consumer Hotline

at 800-759-0977 for immediate assistance before contacting your retailer.

Please read the warranty information at the back of these assembly

instructions for further details.

IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS

IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

2

PARTS IDENTIFIER (NOT TO SCALE)

#1 #2 #3 #4

5/16"X1-1/4" Bolt
32 Pieces

5/16" Black Flat
Washer
32 Pieces

Leg Leveler

4 Pieces

#5 #6 #7 #8

1/4" Black Flat
Washer
52 Pieces

5/8" Flat Head Screw
12 Pieces

hcnerW xeH

1 Piece

#9 #10 #11 #12

Table Tennis Top A
1 Piece

Table Tennis Top B
1 Piece

Leg

4 Pieces

#13 #14 #15 #16

Bench
2 Pieces

Bench Ends

4 Pieces

4 Pieces

etalP gnitroppuS hcneB

1/4"X1-1/8" Bolt

52 Pieces

Table Body
1 Set

Connecting Plate

8 Pieces

Corner Basket

4 pieces

#17

Middle Basket

2 pieces

#18

Table Tennis Net & Posts

1 set

#19 #20

Table Tennis Racket
2 pieces

Table Tennis Ball

2 pieces

#21 #22 #23 #24

Billiard Ball
1 Set

Cue Stick
2 Set

Triangle
1 Piece

Chalk

2 Pieces

#25

Brush

1 Piece

Please see Parts List at end of manual for part number when ordering parts. For replacement parts please call 800-759-0977.

3

ASSEMBLY TIPS

1. Find a clean, level surface to begin the assembly of your game table. The table will be
partially assembled upside down and then turned over onto its legs. This is a heavy game
and turning it over will require at least two strong adults.

2. Remove all of the contents from box and verify that you have all of the parts shown on the

Note: Some parts may be pre-installed or

pre-assembled.

understand the text before beginning each assembly step.

4. When installing parts that have more than one screw or bolt, hand tighten all screws or
bolts in place before finishing tightening with screwdriver or hex wrench.

5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened if the electric
screwdriver's torque is set too high.

WARNINGS!

READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.

CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS - NOT

SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

4

ASSEMBLY INSTRUCTIONS

NOTE: The BALL BASKETS #16 & #17 have been pre-installed in table to protect them during
shipping. You may have to temporarily remove them to install the LEGS #11 as described below.
An alternative method is show in Fig. 1.

1. Attach LEGS #11 and CONNECTING PLATES #12 to the corners of the TABLE BODY as shown
below using 5/16” BOLT #1 and 5/16” FLAT WASHER #2. NOTE: the table is assembled upside down.

2. Thread one LEG LEVELER #3 onto bottom of each LEG #11. Carefully turn table upright.

#3

#11

#12

#12

Alternative Leg Attachment (Fig. 1)

# 11

Fig. 1

Attach the CONNECTING PLATES #12 to
the LEGS #11 with BOLTS #1 & WASHERS

#11

#11

#2

#1

#8

#2 through only the two inside holes of
plates as shown. Then slide this assembly
down onto table corner and secure to
table with four bolts and washers using
outer holes. Using this method will avoid
removing and replacing ball baskets.

3. Attach BENCH SUPPORTING PLATES #15 to the BENCH ENDS #14 as shown below using

1/4" BOLT #4 and 1/4" FLAT WASHER #5.

4. Attach BENCH #13 to the BENCH ENDS #14 and BENCH SUPPORTING PLATES #15, as shown
below, using 1/4" BOLT #4 and 1/4" FLAT WASHER #5.

#14

#4
#5

#4
#5

#15

#14

#5

#4

#15

#13

#14

#14

#15

WARNING: To prevent injury, exercise caution when opening and closing bench lid. Do NOT let bench lid drop shut. Do NOT let
children operate bench lid. Be cautious when moving bench on oor. EVA pads will allow bench to slide on hard ooring,
but may cause tipping on carpeting. Lift bench ends to move.

5

ASSEMBLY INSTRUCTIONS (CONT.)

5. Attach CORNER BASKET #16 and MIDDLE BASKET #17 to the pockets of the TABLE BODY #8
as shown below using 5/8” FLAT HEAD SCREW #6.

#6

#8

#6

#17

corner pockets when attaching corner baskets.
This will catch screws, and keep them from falling
into leg cavity, if you accidentally drop any.
Make sure baskets are centered in opening
before attaching.

#16

6. To assemble TABLE TENNIS TOP, place TABLE TENNIS TOP A #9 and TABLE TENNIS TOP B
#10 on top of assembled pool table. Push halves together.

#10

#9

6

ASSEMBLY INSTRUCTIONS (CONT.)

TOP at the center line, as shown below. Attach the net to each post.

#18

ELBAT SINNET delbmessa eht fo edis hcae ot 81# TEN SINNET ELBAT eht fo tsop eno hcattA .7

7

CONGRATULATIONS!

You have now assembled your Game Table.

Please note the Care and Use instructions below to

ensure years of trouble free use of your game table.

CARE AND USE

1. This product is intended for INDOOR use only.

2. Do NOT sit, climb or lean on the table.

3. Do NOT drag the table when moving it as this will damage the legs.

8

180-DAY LIMITED WARRANTY

This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.

This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.

This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.

This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.

The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.

The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.

This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
merchantability or tness for use to the extent permitted by Federal or state law. Neither the manufac­turer nor any of its representatives assumes any other liability in connection with this product.

All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.

For further warranty information or inquiries, please call 800-759-0977

NEWPORT 7' POOL TABLE SET - NG2535P

Parts List

PARTS

WARE PACK - NGP6233

18

9

10

10

16

3

17

8

11

#3 NGP50785 #8 NGP6226 #9 NGP6227 #10 NGP6228 #11 NGP6229

9

14

#12 NGP5956

15

13

12

#13 NGP6230

TABLE

BOTTOM

CONNECTING

LEG LEVELER

#14 NGP6231 #15 NGP6232 #16 NGP5960 #17 NGP5961 #18 NGP5964 #19 NGP5138

BENCH ENDS

#21 NGP5136 #22 NGP5191

BILLIARD

BALL SET

#1 #2 #4 #5

5/16” x 1-1/4” BOLT

TABLE BODY

BENCH

SUPPORTING

PLATE

2-PIECE

CUE STICK

5/16” BLACK FLAT

WASHER

TABLE TOP A

CORNER BASKET

#23 NGP5135 #24 NGP5077

TRIANGLE

1/4” x 1-1/8” BOLT

TABLE TOP B

MIDDLE BASKET

CHALK BRUSH

1/4” BLACK FLAT

WASHER

LEG

TABLE TENNIS

NET & POSTS

#25 NGP5073

#6

5/8” FLAT HEAD

SCREW

PLATE

TABLE TENNIS

RACKET

#7

HEX WRENCH

BENCH

#20 NGP5029

TABLE TENNIS

BALL

5/15