Canon Ti 300V User Manual
Canon
Ressi
300D / SOODdate
tNSTRUCTtONS
Thank you for purchasing a Canon product.
The EOS REBEL Ti (DATE) / 300V (DATE) is a very compact autofocus,
single-lens reflex camera. It can be used for a wide variety of subjects
and situations with fully automatic and user-controlled shooting modes.
Read this Instructions and familiarize yourself with your new camera
before taking pictures.
Also read “Handling Cautions” on page 4 to prevent camera malfunction
and damage.
Keep this instruction booklet handy for easy reference.
Before Using Your Camera
• Before shooting an important event, be sure to take test shots to
make sure the camera operates properiy.
• EOS cameras have a iens mount for dedicated operation
(autofocusing, exposure control, etc.) with Canon EF ienses. Using
a non-Canon EF lens with an EOS camera may not resuit in proper
camera or iens operation.
Note that the warranty does not cover any camera malfunction or
damage occurring with the use of non-Canon products.
Conventions Used in this instructions
• The <£22i> icon indicates the Main Diai.
• Ail operation procedures described in this booklet assume that the
Command Dial is set to a mode except <<3B>. Before proceeding
with any operation, be sure that the Command Dial is set to a
shooting mode.
• Page numbers in parentheses (-^page ■) indicate where you can
find additionai relevant information.
• The camera control icons and markings used in this booklet
correspond to the actual icons and markings found on the camera.
See “Nomenclature” on page 8.
• The (5)4) and (5>6) icons indicate that the respective function
remains in effect for 4 and 6 sec. respectively after the button is
released.
Contents
Conventions Used in this Instructions
Handling Cautions
Quick Start Guide
Nomenclature
Since everything is automatic, all you do is press the shutter
button.
........................................................................
.........................................................................
...............................................................................
3 User-Controlled Shooting............................................31
Set the shutter speed, aperture, exposure compensation, AEB, and
other settings as you wish.
Reference.
Basic terminology, exposure warning displays, shooting mode
settings, and other information.
Symbols
^ The Caution symbol alerts you to actions to prevent shooting
^ problems.
The Note symbol gives supplemental information for basic
*-* camera operation or picture-taking tips.
..........................................
2
4
6
8
Handling Cautions
Camera Care and Storage
(1) The camera is a precision instrument. Do not drop it or subject it to
physical shock.
(2) This camera is not waterproof and cannot be used underwater. If
the camera gets really wet, promptly consult your nearest Canon
Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe with a well-wrung damp
cloth.
(3) Do not leave the camera in places prone to excessive heat such as
in a car on a sunny day. Excessive heat can cause the camera to
malfunction.
(4) The camera contains precision electronic circuitry. Never attempt to
disassemble the camera.
(5) Use only a blower brush to blow away dust on the lens, eyepiece,
mirror, focusing screen, and film compartment, Do not clean the
camera body or lens with a cleaner containing an organic solvent.
For stubborn dirt, consult your nearest Canon Service Canter.
(6) The shutter curtains are extremely thin. Use only a blower to clean
them. Be careful not to blow air loo forcefully on the shutter curtains.
The shutter curtains can be easily deformed or damaged. Also,
when loading and unloading film, be careful not to touch the shutter
curtains.
(7) Do not touch the electrical contacts with your fingers. Otherwise
corrosion may develop on the contacts, resulting in improper
camera operation.
(8) If the camera is not to be used for an extended period, remove the
battery. Store the camera in a well-ventilated, cool, dry place. During
the storage period, press the shutter button to release the shutter a
few times once in a while.
(9) Avoid storing the camera in a laboratory, cabinet, etc., where
corrosive chemicals are present.
(10) If the camera has not been used for an extended period or if the
camera is to be used for an important event, check the operation of
all the camera controls or take it to your nearest Canon Service
Center for inspection.
LCD Displays
In time, the camera's LCD panel display and the LCD display in the
viewfinder may fade and become difficult to read. It this happens, have it
replaced (at cost) by a Canon Service (Center.
At low temperatures, the LCD display response may become slower.
And at 60'C/140'F or higher temperatures, the display may blacken. In
either case, the display will return to normal at room temperature.
Lithium Batteries
(1) The camera operates on two CR2 lithium batteries. Check the
battery level in the following cases (-»page 14):
• After replacing the batteries.
• After not using the camera for an extended period.
• The shutter stops working.
• The camera is being used in a low-temperature environment.
• You will be shooting an important event.
(2) Before installing the batteries, wipe the battery contacts to remove
any fingerprints and smudges. This is to prevent faulty connections
and corrosion.
(3) Never disassemble or recharge the batteries. Also, never store a
battery in high-temperature places or short circuit the battery
contacts or loss a battery into a fire.
(4) Although the batteries work well even at low temperatures, battery
performance may decline slightly at freezing temperatures. In such a
case, keep spare batteries warm in a pocket, etc., and use and warm
the batteries alternately.
How Low Battery Levels Affect Camera Operation
On the LCD panel, if the <CT3> icon blinks or it is not displayed, a
proper exposure can still be obtained as long as the shutter releases.
However, when the battery level is low, film advance and auto rewind
might stop midway or not work at all and < CD > may blink on the LCD
panel. After the batteries are replaced with new ones, film advance will
be possible and film rewind can resume by pressing the > button.
Lens Electrical Contacts Contacts
After detaching the leni from the camera, put
on the lens caps or put down the lens with the
rear end up to avoid scratching the lens surface
and electrical contacts.
Quick Start Guide
cs
Install the batteries.
Insert two CR2 lithium bat
I
teries as shown by the bat
tery orientation diagram on
the battery compartment
cover, (^page 14)
Load the film.
Align the edge of the film
5
with the < A > mark, and
close the back cover until it
snaps shut, (^page 18)
• The film will then advance
to the first frame
automatically.
^ f ( 1 ^
%
Align the red dots on the
lens and camera and turn
the lens as shown by the
arrow until it snaps into
place, (^page 16)
'f Focus the subject.
"h- Aim the AF point on the
'■ subject and press the shut
ter button halfway to auto
focus. (^page 22)
• Under low-light or backlit
conditions, the built-in flash
will pop-up and fire
automatically. (->page 49)
On the lens, set the
focus mode switch to
<AF>.
{->page 16)
Turn the Command Dial
tto <a> (Full Auto).
(^page 22)
Take the picture.
Press the shutter button
fully to take the picture,
(^page 17)
Unload the film.
At the end of the roll, the
8
film rewinds automatically
Open the back cover to
remove the film cartridge,
(^page 19)
Nomenclature h
The reference page is indicated in parentheses.
The camera controls are indicated as icons in brackets < >.
Command Dial
(^page 12)
<-6->Film plane mark
Main Dial
(^page 2)
Shutter button
(-^page 17)
'Remote control n
sensor
(-»page 28)
Self-timer
(-»page 27)/
•Remote control
lamp (-»page 28)
Grip / Battery
compartment
(-»page 14)
* DATE Model only
Built-in flash (-»page 49)
AF-assist beam (-»page 23)
Red-eye reduction lamp (-»page 26)
Hot shoe
Flash-sync contact
V > Flash button
(-»page 49)
---------
<□ Qs Cs)l> /
Film advance mode/
Self-timer/*Remote
control button
(^page 35/27)
Remote control
terminal
(^page 51)
Strap mount
(-»page 13)
Lens release button
(-»page 16)
LDepth-of-field preview button
Focus mode switch (-»page 16)
---------------------------Manual focusing ring (-»page 34)
(^page 41)
Zoom ring
8
Viewfinder eyepiece
Eyecup {->page 28)
Film check window
Back cover — i
release lever
(->page 18)
LCD panel (-^page 10)
Tripod socket
<Qs > Midroll rewind button
(^page 20)
<ik> LCD panel illumination button -
(^page 51)
* DATE Model only
Take off the eyecup, then slide the diop
tric adjustment lever left or right until the
AF point in the viewfinder looks sharp.
The dioptric adjustment range is -2.5 dpt
to -rO.5 dpt.
< Av +/— > Exposure
compensation (->page 45)
Manual aperture setting
*SET button (^page 30)
'-Battery compartment
(-»page 42)
— <*> AE lock
(^page 44)
/ FE lock button
<H> AF point
selection button
(-^page 32)
Back cover
<FUNC>
Function
button
(^page 19,
26, 29, 46,
48, 50, 51)
Guide hole
compartment cover
Battery
release lever
(-^page 14)
Nomenclature!
Shutter speed-----------
(гопа - 30". buLb)
FE lock (FfL)
ISO film speed (6 ■ В Ч 0 0
Date
DATE Model
Shooting mode
AF point mark --------------:
Film advance mode
< □ > Single frame
<Q|i> Continuous shooting
<&!> Self-timer/
Remote control
Battery level mark
iZfil -CU
<@> Film mark -----
Non-DATE Model
------------
LCD Panel
Exposure level
Exposure compensation amount
AEB level
Film transport indicator
Red-eye reduction lamp-on indicator
< IZB > Manual focus
Aperture (DO - 3 ()
Red-ey reduction
setting (0, /)
Beeper setting (0, /)
AEB amount ( 0 0 - 3 H )
Date
< liHH > Date
<ISO> ISO film speed
<<§>> Red-eye reduction
<■11) > Beeper
> Multiple exposures
<^> AEB
< ► > Function pointer
■ Frame counter (( - 33 )
Multiple-exposure setting
(/ - 9 )
Self-timer operation ( to - i )
Remote control operation (г ,l)
10
• The LCD panel is shown with all the
information displayed The actual display
will look different.
Viewfinder information
AF points (7) ----------
---
Superimposed display
position
<*> AE lock / FE lock-
< ^ > Flash-ready
Improper FE lock warning
<H> High-speed sync -
(FP flash)
Shutter speed {c'OiJD ■ 30“ , b u L b )
FEIock{FEi.)
Aperture (0 0-3 1)
AEB in progress i
' New Lasermatte focusing screen
I < • > Focus confirmation iight
Exposure level
Exposure compensation amount
AEB level
Film transport Indicator
Red-eye reduction lamp-on indicator
■ The LCD panel is shown with all the information displayed. The actual display will
look different.
11
Nomenclature <
Command Dial
The dial is divided into three zones.
0 Basic Zone
Fully automatic mode where the
camera takes care of everything.
O : Full Auto (-»page 22)
Basically, all you do is point and
shoot.
Image Zone (-»page 24)
Fully automatic modes for a par
ticular subject.
9 : Portrait
ik :Landscape
A : Close-up
; Sports
H : Night Portrait
53 : Flash off
12
D Creative Zone
Semi-automatic and manual
modes enable you to take control
of the camera to obtain the
desired result.
P : Program AE (-»page 36)
Tv : Shutter-priority AE
(-^page 38)
Av : Aperture-priority AE
(-»page 40)
M : Manual exposure
(-»page 42)
A'OEP: Automatic Depth-ot-tield AE
(-»page 43)
O €IS : OFF
Before You Start
Installing the Batteries and
Checking the Battery Level
Mounting and Detaching a Lens
How the Shutter Button Works
©Loading and Unloading Film
0a Midroll Rewind................................................20
Holding the Camera...................................................20
__________
.................................
................................
..................................
...................................
Attaching the Strap
Pass the end of the strap through the
camera’s strap mount from the bottom.
Then pass it through the strap’s buckle as
shown in the illustration. Pull the strap to
make sure it does not slip out of the buckle.
• The eyepiece cover is also attached to
the strap.
14
16
17
18
Eyepiece cover
13
Installing the Batteries and Checking the
Installing the Batteries
The camera uses two CR2 lithium batteries.
4 Open the battery compartment
* cover.
• Slide the cover release lever as
shown by the arrow and operi the
battery compartment cover.
^ Instal the batteries.
• Make sure the battery contacts (+
and -) are property oriented as
shown.
• Do not mix old and new batteries.
Close the battery compartment
cover.
• Press the cover until it snaps shut.
• The date and time must be set. See
page 30. (DATE Model only)
Battery
Level i
For places where CR2 batteries may not be easily available, take spare bat
teries with you Also carry spare batteries for extended shooting sessions.
14
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Turn the Command Dial to a shooting mode.
• The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
: Battery level OK.
HE
: The battery level is low. Keep
spare batteries handy.
[5Sti]
1
cm-
: The batteries will soon be
completely exhausted.
H3
: Replace the batteries,
(^page 5)
I
Battery Life
Temperature 0% Flash Use
At 20'C 67 rolls
At-10"C
50% Flash Use 100% Flash Use
30 rolls
44 rolls 20 rolls
(With 24-ex rolis)
22 rolls
15 rolls
The battery life shown in the table is based on the Canon's testing
conditions with new batteries.
If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly. Take out the batteries and install correctly (-»page 14)
Pressing the shutter button halfway tor a prolonged period or operating only
the autofocus without taking a picture will still consume battery power. It will
reduce the number of rolls that can be taken with the batteries.
When not using the camera, set the Command Dial to <6® =
15
Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
• Remove the rear lens cap and the
camera body cap.
Mount the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch is set to
<MF> (or <M> on older lenses),
autofocus will not operate and <EB ;
will be displayed on the LCD panel
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• When the red dot on the lens is at the
top, remove the lens.
31
' Keep the removed caps where you will not lose them
’ “AF” stands for Autofocus.
' “MF" (or “M”) stands for Manual Focus.
16
How the Shutter Button Works
The EOS camera’s shutter button can be depressed halfway or all the
way. There Is a click stop at the halfway point.
Pressing the Shutter Button Halfway or Fully
The shutter button works as described below
When it is pressed halfway:
• Autofocusing (AF) Is activated. When
the subject is in focus, the AF point
which achieved focus will flash, the
beeper will sound, and the focus
confirmation light will light up.
• Also, the shutter speed and aperture
are set and displayed on the LCD
panel and in the viewfinder.
When it is pressed fully;
• The shutter is released to take the
picture and the film advances by one
frame.
o
If an Extender is used and the maximum aperture of the lens becomes small
er than f/5.6 (the lowest f/number), autofocusing will not operate.
I
ra
Camera movement during the moment of exposure is called camera shake.
Camera shake can cause blurred pictures To prevent blurred pictures due to
camera shake:
■ Hold the camera steady (^page 20).
• Use your finger tip to touch the shutter button, grasp the camera with your
entire right hand, then press the shutter button gently.
17
© Loading and Unloading Film
Loading Film
After you load the film, the camera first winds the entire roll onto the
camera’s take-up spool. With DX-coded film, the camera automatically
sets the film’s ISO speed. Then each time a picture is taken, one frame
of film is rewound back into the film cartridge. The frame counter shows
always number of shots remaining.
4 Turn the Command Dial to any
* setting except
"y Open the back cover.
^ • Slide the back cover release lever as
shown by the arrow.
> Insert the film cartridge at an
Right
^ angle as shown in the illustration.
A Align the edge of the film with the
'^orange < A> index mark.
• Hold down the film cartridge while
pulling out the film leader.
• If the edge of the film leader goes
beyond the orange mark, rewind some
of the film back into the cartridge.
Close the back cover.
• Check that the edge of the film is
aligned with the < A> mark, then close
the back cover until it snaps shut.
► After you close the back cover, the
film will start winding on the take-up
spool and the frame counter will
count up. The camera will then make
a shutter-release sound and the
<@> icon and total frame count will
be displayed.
► During the film's prewind, the ISO
speed is displayed on the LCD panel.
18
Loading...