SERVICE BULLETIN
Issued by Canon Europa N.V.
COMP. SYSTEMS
MODEL:
S630, S750, S6300, i950, i850,
i550, i6100, i6500
No.: PRNT-1216
(Q-12E-0063)
Date: 30.05.03
LOCATION: PART CHANGE NOTICE
SUBJECT: NEW DESIGNATION OF PAPER FEED MOTOR
DETAILS
To improve serviceability, the paper feed motor (secured with 2 red screws) has been designated as a
service part.
Red screws
Paper feed motor
SERVICE PARTS
NO. DESCRIPTION PART NUMBER Q’TY IC P.C.
1O -- S630
N MOTOR, PAPER FEED QH4-4342-000 0 – 1
2O -- S750
N MOTOR, PAPER FEED QH4-4433-000 0 – 1
3O -- i950
N MOTOR, PAPER FEED QH4-4461-000 0 – 1
4O -- i850/i550
N MOTOR, PAPER FEED QH4-4459-000 0 – 1
5O -- i6100, i6500
N MOTOR, PAPER FEED QH4-4373-000 0 – 1 S6300
COMP. SYSTEMS - 2 - PRNT-1216
SERVICE TIP
1. Details of change
Removal of the paper feed motor in servicing was not allowed, as belt tension adjustment using the
tool was required after re-attachment. However, as it has been confirmed that the paper feed motor
can be replaced without using the tool, the part has been designated as a service part.
2. Caution
The paper feed motor should be removed only when necessary. When attaching it, be careful of the
following points:
(1) In attaching the paper feed motor, position the motor so that the belt is pulled tight, and fasten
the screws.
(2) After paper feed motor replacement, be sure to perform the service test print, and confirm that
no
the motor, etc.) occurs.
strange noise or improper printing (such as due to dislocation of the belt, or out-of-phase of