Canon PIXMA HOME OFFICE TR8660 Start Guide
Getting Started
Guía de inicio
Online Setup
Conguración en línea
Detailed instructions and videos are
available on the Canon website.
Hay vídeos e instrucciones detalladas en
el sitio web de Canon.
Setup a Computer
Congurar un ordenador
Setup a Smartphone
Congurar un teléfono inteligente
Read Safety and Important Information
(addendum) rst.
Lea primero Información de seguridad
e información importante (apéndice).
Installing the Printer ...................................................................................................................page 1
Instalación de la impresora ............................................................................................... página 1
Connecting to a Computer, Smartphone or Tablet ...............................................page 6
Conexión con un ordenador, teléfono inteligente o tableta ....................... página 6
Holding the Printer
Cómo sujetar la impresora
Instructional Videos
Vídeos instructivos
Go
Setting Up the Printer
Close the scanning unit / cover.
3
Online Setup
1. Box Contents
Ink Tanks for setup
•
Power Cord
•
Phone Cable
•
Safety and Important Information
•
Getting Started (this manual)
•
2. Removing Packing Materials
3. Turning on the Printer
Connect the power cord.
1
The plug is set at an angle.
•
Back
ENGLISH
Caution
Watch your ngers.
Remove and dispose of any protective lm and
1
orange tape.
Using the printer with orange tape or protective lm
•
still attached, may cause the printer to malfunction.
Open the scanning unit / cover and remove the
2
orange tape.
a
b
Open the operation panel and press the ON
2
button.
b
a
1
Setting Up the Printer
Scroll and tap to select your language, and then
3
tap Yes .
4. Installing the Ink Tanks
Open the scanning unit / cover.
1
Caution
Do not touch the print head holder until it stops moving.
Remove the tape and lm on the ink tank.
2
If the following screen appears, tap your country
4
or region to select.
Tap OK.
5
a
b
Check that no tape or lm is left.
•
Slowly remove the orange cap.
3
Important
Do not squeeze the ink tank with the
•
Y-shaped air hole blocked.
Do not touch the areas shown in red.
•
2
Install the ink tank.
4
Insert the ink tank into the print head and press down
•
until it clicks.
5. Loading Paper
Check that the color of the ink tank you installed
5
appears on the screen.
Important
If the color is not displayed on the screen even though you
have installed the ink tank, the color of the ink tank may be
wrong or you may have installed an ink tank, such as one
with a dierent model number, that is not supported by this
printer. Either install an ink tank for the correct color or use the
provided ink tank for setup.
Repeat steps 2 through 5 to install all the ink
6
tanks.
Check that all the colors appear.
•
Tap OK.
1
Remove the cassette from the printer.
2
Remove the cassette cover.
3
Cassette cover
ENGLISH
Close the scanning unit / cover.
7
The printer will start initializing.
•
Caution
Watch your ngers.
Slide apart the paper guides.
4
Slide the right paper guide to the right edge. Align
•
the front paper guide with the Letter mark.
a
b
Load Letter sized plain paper.
5
Place the paper against the front paper guide, and
•
align the right paper guide to the width of the paper.
a b
3
Setting Up the Printer
Attach the cassette cover and replace the
6
cassette.
a
Pull out the paper output tray.
7
b
a
b
6. Aligning Print Head
Tap OK.
1
The Print Head Alignment pattern starts printing.
•
Check that the pattern is printed.
2
Printed Print Head Alignment
pattern
Place the pattern on the platen.
3
Open the document cover and place the print side
•
facing down.
Align the arrow mark on
the device and the
the pattern
Close the document cover and tap OK.
4
on
4
Loading...