Canon LC-XWUX5800Z, LC-XWUX6600Z, LC-XWUX7000Z User Manual

MULTIMEDIA PROJECTOR

User’s Manual

Safety Instructions

Before Use

Basic Guide

Projection Procedure

Convenient Projection
Features

Installation Procedure

Installation Guide

Connection Procedure

Adjusting the Image

Special Arrangements

Using Menus

Menu Guide

Menu Configuration

Menu Description

Maintenance

Product Specifications

Troubleshooting

ENG

How to Use This Manual

LENS button

FOCUS button

ZOOM button

Remote control

Projector

Symbols Used in This Manual

Sections labeled with these symbols give the following kinds of information.

Indicates precautions and information to note when using the projector.

Symbols of Button Operations

The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of the
projector.
In this document, the button’s operations are shown as below.

Remote control button
operation

Operation of buttons
on side of projector

Indicate the buttons to
be pressed

Thank you for purchasing a Canon projector.
The WUX7000Z/WUX6600Z/WUX5800Z Multimedia Projector is a high­performance laser projector capable of projecting high-resolution computer
screens and high-quality digital images on a large screen.

This Manual

This is the user’s manual for WUX7000Z/WUX6600Z/WUX5800Z Multimedia
Projector (hereafter, “projector”). The “Basic Guide” describes basic steps before
projection and introduces features that are convenient in presentations and other
situations. The “Installation Guide” covers how to install the projector and join a
network, and the “Menu Guide” explains setting menus and how to use them.
Read this manual thoroughly to make the most of your projector. We recommend
requesting installation by a qualified technician or the Canon Customer Support
Center.

Focusing / Resizing the Image

Press the ZOOM button on the remote control to adjust the image size, and press
the FOCUS button to adjust the focus. You can also press the LENS button on the
projector once to adjust focus and twice to adjust image size.

2

Table of Contents

How to Use This Manual............... 2

Projector Highlights...................... 5

Safety Instructions........................ 7

Safety Symbols in this Manual ........... 13

Precautions for Use ............................. 14

Power Supply ....................................... 14

Installation and Use ............................. 16

Laser Light Source .............................. 18

Remote Control Batteries.................... 21

Handling................................................ 21

For Safe Use ................................ 23

Carrying and Installation..................... 23

Before Installation....................... 25

Precautions When Carrying / Shipping

the Projector......................................... 25

Precautions for Installation................. 25

Wireless LAN (Wi-Fi)............................ 30

Open Source Software ............... 31

Before Use ................................... 32

Included Accessories .......................... 32

Projector Part Names and

Functions.............................................. 33

Remote Control .................................... 38

Basic Guide ............................43

Projection Procedure.................. 44

Step 1 Connect Other Equipment....... 45

Step 2 Turn the Projector On .............. 46

Step 3 Select an Input Signal.............. 47

Step 4 Adjust the Image ...................... 48

Step 5 Select the Image Quality

(Image Mode)........................................ 49

Turn the Projector Off.......................... 51

Convenient Projection

Features ....................................... 52

Convenient Features ........................... 52

Projecting Images on a USB Flash

Drive ...................................................... 56

Projecting Two Images Side by

Side ....................................................... 60

Installation Guide...................62

Installation Procedure.................63

Relationship Between Projecting

Distance and Image Size ..................... 63

Installing / Removing the Lens Unit ... 67

Installation ............................................ 70

Adjusting Peripheral Focus ................ 74

Connection Procedure................78

Connecting Other Equipment............. 78

Connecting to a Network..................... 83

Controlling the Projector from a

Computer .............................................. 97

Adjusting the Image ....................99

Filling the Screen ................................. 99

Adjusting Keystone Distortion ......... 103

Adjustment Using a Test Pattern ..... 107

Special Arrangements ..............108

Projecting from Multiple Projectors at

Once (Edge Blending) ....................... 108

Using PC-Free Multi Projection ........ 114

Menu Guide ..........................118

Using Menus ..............................119

Menu Configuration ..................122

Menu Description ......................130

Input settings ..................................... 130

Image adjustment .............................. 139

Install settings.................................... 149

System settings ................................. 161

Network settings ................................ 182

Checking Projector Information ....... 197

Projector Web Screen Menu.....198

Maintenance /
Product Specifications /

Troubleshooting ..................216

Maintenance...............................217

Cleaning the Projector....................... 217

Replacing the Air Filter...................... 217

3

Table of Contents

Product Specifications ............. 219

Troubleshooting........................ 229

LED Indicator Details......................... 229

Symptoms and Solutions.................. 230

Index........................................... 237

Option ........................................ 239

4

Projector Highlights

Bright Yet Compact, With a Laser Light Source

A bright projector that is also compact, at 480 x 545 x 196 mm (18.9 x 21.5 x 7.7 in.,
W x D x H). Features a laser light source that lasts longer than traditional mercury
lamps.

Peripheral Focus Adjustment

Image focus can be adjusted on the edges of the screen, enabling use in dome
projection.

HDBaseT Input

The projector supports HDBaseT, a next-generation connectivity standard.
HDBaseT offers a convenient connection for carrying high-quality video and audio
signals equivalent to HDMI across distances up to 100 m (328.1') over a single LAN
cable.

Lens Shift

Lens shift enables motorized image repositioning up, down, left, or right for greater
freedom in installation.

Motorized Zoom and Focus Adjustment

Efficient setup using motorized zoom and focus adjustment.

Full Range of Lens Units Available

Choose the optimal lens unit for the projection distance or purpose.

Superior Video Viewing Experience

Refinements in motion blur reduction make video projection more enjoyable to
watch.

Scheduling

Automate projector tasks according to your schedules. Turn the projector on or off,
switch input signals, and more.

Edge Blending

Blend the overlapping edges of images from multiple projectors to make the overall
image more seamless.

Networked Multi-Projection (NMPJ)

Project images from multiple computers via a network connection.

5

Projector Highlights

Wi-Fi Connectivity

In addition to wired LAN connectivity, the projector also supports Wi-Fi.
In Projector Access Point (PJ AP) mode, the projector can be connected to up to
five computers without using a wireless access point.

Canon Service Tool for PJ (Canon ST)

An iOS app for easy remote control and status management of projectors over Wi­Fi. Connect to a projector used as an access point (P84), or connect via an existing
access point (P84). Note that a password is required when using Canon ST (P198).

6

Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the
projector properly enables you to manage those features and maintain it in good
condition for many years to come.
Improper operation may result in not only shortening the product life, but also
malfunctions, fire hazards, or other accidents.
If your projector does not seem to be operating properly, read this manual again,
check operations and cable connections, and try the solutions in the
“Troubleshooting” section in the back of this manual. If the problem still persists,
contact the Canon Customer Support Center.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS FOR THIS
UNIT IN THE OWNER’S MANUAL.

Safety Instructions

CAUTION
Not for use in a computer room as defined in the Standard for the Protection of
Electronic Computer / Data Processing Equipment, ANSI / NFPA 75.

7

Safety Instructions

Safety Precautions

WARNING:

• THIS APPARATUS MUST BE GROUNDED.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

• This projector produces intense light from the projection lens. Do not stare

directly into the lens, otherwise eye damage could result. Be especially careful
that children do not stare directly into the beam.

• Install the projector in a proper position. Otherwise it may result in a fire hazard.

• Do not cover the ventilation slots on the projector. Heat build-up can reduce the

service life of your projector, and can also be dangerous.

• If the projector is unused for an extended time, unplug the projector from the
power outlet.

• Do not project the same image for a long time.

An afterimage may remain on the LCD panels due to the characteristics of the
panels of the projector.

CAUTION ON HANGING FROM THE
CEILING

When hanging the projector from the ceiling, clean the air intake vents and top of
the projector periodically with a vacuum cleaner. If you leave the projector unclean
for a long time, the cooling fans can be clogged with dust, and it may cause a
breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS
SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF
THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.

8

Safety Instructions

■ READ AND KEEP THIS OWNER’S MANUAL FOR LATER

USE.

All the safety and operating instructions should be read before beginning to operate
the product.

Read all of the instructions given here and retain them for later use. Unplug this
projector from the AC power supply before cleaning. Do not use liquid or aerosol
cleaners on the projector. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection of the projector during a lightning storm, or when it is left
unattended or unused for long periods of time, unplug it from the wall outlet. This
will prevent damage due to lightning and power surges.

Do not expose this unit to rain or use near water... for example, in a wet basement,
near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may result
in hazards.

Safety Instructions

Do not place this projector on an unstable cart, stand, or table. The projector may
fall, causing serious injury to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the manufacturer, or sold with the
projector. Wall or shelf mounting should be carried out in accordance with the
manufacturer’s directions, and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.

Slots and openings in the rear and front of the cabinet are provided
for ventilation, to insure reliable operation of the equipment and to protect it from
overheating.

The openings should never be covered with cloth or other materials, and the
bottom opening should not be blocked by placing the projector on a bed, sofa, rug,
or other similar surface. This projector should never be placed near or over a
radiator or heat register.

This projector should not be placed in a built-in installation such as a book case
unless proper ventilation is provided.

9

Safety Instructions

Never push objects of any kind into this projector through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind onto the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated using only the type of power source indicated on
the marking label. If you are not sure of the type of power supplied, contact the
Canon Customer Support Center or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric
shock. Do not allow anything to rest on the power cord. Do not locate this projector
where the cord may be damaged by people walking on it.

Do not attempt to service this projector yourself as opening or removing covers
may expose you to dangerous voltages or other hazards. Refer all servicing to
qualified service personnel.

Unplug this projector from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating

instructions. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the projector

to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a

need for servicing.

When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer that have the same characteristics
as the original parts. Unauthorized substitutions may result in fire, electric shock, or
injury.

Upon completion of any service or repairs to this projector, ask the service
technician to perform routine safety checks to determine that the projector is in safe
operating condition.

10

Safety Instructions

Ground

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirements for use in
the country you purchased it.

AC Power Cord for the United States and Canada:

The AC Power Cord used in the United States and Canada is
listed by the Underwriters Laboratories (UL) and certified by
the Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug. This is
a safety feature to ensure the plug fits into the power outlet. Do
not try to tamper with this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND
EASILY ACCESSIBLE.

Only for European Union and EEA (Norway, Iceland and
Liechtenstein)

These symbols indicate that this product is not to be disposed of
with your household waste, according to the WEEE Directive (2012/
19/EU), the Battery Directive (2006/66/EC) and/or national
legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this
battery or accumulator at a concentration above an applicable
threshold specified in the Battery Directive.
This product should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste
electrical and electronic equipment (EEE) and batteries and
accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to
potentially hazardous substances that are generally associated with
EEE. Your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources.
For more information about the recycling of this product, please
contact your local city office, waste authority, approved scheme or
your household waste disposal service or visit
www.canon-europe.com/weee

, or www.canon-europe.com/battery.

Safety Instructions

11

Safety Instructions

Federal Communication Commission Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that
may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense. The cable with a ferrite core provided with the
projector must be used with this equipment in order to comply with Class A of the
FCC Rules. Use of a shielded cable is required to comply with Class A of FCC
Rules. Do not make any changes or modifications to the equipment unless
otherwise specified in the instructions. If such changes or modifications should be
made, you could be required to stop operation of the equipment.

Warning:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
The cable with a ferrite core provided with the projector must be used with this
equipment in order to comply with Class A.
Use of a shielded cable is required to comply with Class A.

12

Safety Instructions

Safety Symbols in this Manual

This section describes the safety symbols used in this manual. Important projector
safety information is identified by the following symbols. Always observe the safety
information by these symbols.

Denotes the risk of death or serious injury from improper
handling if the information is not observed. To ensure safe use,
always observe this information.

Denotes the risk of injury from improper handling if the
information is not observed. To ensure safe use, always observe
this information.

Denotes the risk of electric shock from improper handling if the
information is not observed. To ensure safe use, always observe
this information.

Denotes the risk of burns from improper handling if the
information is not observed. To ensure safe use, always observe
this information.

Denotes the risk of eye injury from laser emission if usage
restrictions are not observed.

Safety Instructions

Denotes prohibited actions.

Denotes required actions or information that must be observed.

13

Safety Instructions

Precautions for Use

As this section contains important safety-related information, be sure to read the
following carefully beforehand in order to use your projector correctly and safely.

Power Supply

During installation, keep the projector plug easily accessible so that the projector can be
unplugged immediately if necessary, or keep a circuit breaker within reach.
If the following situations occur, turn the power off, remove the power plug from the
power outlet and contact the Canon Customer Support Center. Failure to do so could
cause a fire or result in an electric shock.

• If smoke is emitted

• If an unusual smell or noise is emitted

• If water or other liquid has entered the projector

• If metal or any other foreign material has entered the projector

• If the projector is knocked over or dropped and the cabinet is

damaged

Pay attention to the following points regarding the power source, power plug and
handling of the connector. Failure to do so may cause a fire or electric shock.

• Do not place any objects on the power cord and do not allow it to
become trapped under the projector.

• Do not cover the power cord with a carpet.

• Do not modify or excessively bend, twist, pull, wind, or bundle the

power cord.

• Keep the power cord away from heaters and other sources of
heat.

• Do not use a damaged power cord. If the power cord is
damaged, contact the Canon Customer Support Center.

•

Do not use any power source with a voltage other than the voltage
indicated (AC 100 – 240 V).

• Do not insert any metal objects into the contact parts of the
power plug or connector.

• The power cord included with this projector is for use exclusively
with this product. Do not use this cord for other products.

• Do not remove the power plug or connector with wet hands.

14

Safety Instructions

Pay attention to the following points regarding the power source, power plug and
handling of the connector. Failure to do so may cause a fire or electric shock.

• Insert the power plug and connector securely up to the base.
Additionally, do not use a damaged power plug or an outlet that is
loose.

• Do not pull the power cord and be sure to hold the power plug or
connector when removing. Incorrect handling may damage the
power cord.

• When using an extension cord, do not exceed the cord’s rated
capacity.

• Do not exceed the rated capacity of the outlet (as by using it for
more than one piece of equipment), which poses a risk of fire
from overheating.

• Periodically inspect the power plug and outlet and remove any
dust or dirt from between the plug and the outlet.

• Do not touch the projector itself, the power cord, or the cable if
lightening strikes.

• Do not move the projector until you have switched off the power,
removed the power plug from the power outlet and unplugged
any other cables.

• Unplug the projector before cleaning or maintenance.

• Before you install or remove the lens unit, be sure to unplug the

power plug of the projector from the power outlet.

Safety Instructions

15

Safety Instructions

Installation and Use

Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.

• Do not use the projector where it might get wet, such as outdoors
or by bathtubs or showers.

• Do not place containers containing a liquid on top of the
projector.

• Make sure to implement anti-fall measures such as an anti-fall
wire when installing the projector in high places, for example,
installing it on the ceiling.

• Do not remove the cabinet from the projector or disassemble it.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.

• Do not disassemble or modify the projector (including
consumable parts) or the remote control.

• Do not look directly into the exhaust vents during use.

• Do not insert any object into vents in the projector, such as the air

intake vent or exhaust vents.

• Do not place a pressurized can in front of the exhaust vents. The
pressure of the contents of the can may increase due to heat
from the exhaust vents and this could result in an explosion.

• When cleaning off dust or dirt from projector parts such as the
lens or filter, never use any spray that is flammable. Internal parts
that become hot may ignite and cause a fire.

• Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector. They could adhere to the cabinet
and damage it, possibly resulting in the projector falling from its
mounting and causing an accident or personal injury.

• As strong light beams are emitted
while the projector is in use, do
not look directly into the projector
lens. Doing so could cause an
eye injury. Pay particular attention to prevent small children from
doing so.

• Operators shall control access to the beam within the hazard
distance or install the product at a height that will prevent eye
exposure within the hazard distance.

16

Safety Instructions

Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.

• Light from the projector is classified as Risk Group 2 (RG2)
according to IEC 62471-5:2015. However, it may be classified as
Risk Group 3 (RG3) when a replacement lens with a projection
ratio larger than 2.6 is used. Refer to the Hazard Distance table
for various replacement lenses.

• Do not hold or install optical instruments (such as magnifying
glasses, reflectors, or glasses) in the path of light from the
projector. If projected light is refracted or reflected and enters
people’s eyes, it may result in eye injury.

• If children may approach the projector or touch it, always ensure
the projector is used under adult supervision.

• No direct exposure to the beam shall be permitted.

• Do not lift the projector alone. Have at least one assistant.

• When setting the projector on a high surface for projection, be

sure the surface is flat and stable.

• Do not use the projector on a soft surface such as carpet or
sponge mat, etc.

• For ceiling mounting or other installation work, request service
from a qualified technician or the Canon Customer Support
Center. Poor installation work could result in an accident.

• To avoid hazards such as parts falling when the lens of a ceiling­mounted projector is replaced, request service from a qualified
technician or the Canon Customer Support Center.

• Do not use where combustible or explosive gases may occur.
Internal parts that become hot may ignite and cause a fire.

Safety Instructions

Hazard Distance When Equipped with a Replacement Lens (IEC 62471-5)

Projection ratio*

RS-SL01ST 1.49-2.24:1 —*

RS-SL02LZ 2.19-3.74:1 167 cm (5.5') 167 cm (5.5') 167 cm (5.5')

RS-SL03WF 0.80:1 —*

RS-SL04UL 3.55-6.94:1 400 cm (13.1') 400 cm (13.1') 400 cm (13.1')

RS-SL05WZ 1.00-1.50:1 —*

RS-SL06UW 0.54:1 —*

*1Projection ratios are calculated values based on a 16:10 screen aspect and

100-inch screen size.

2

*

Light from the projector is classified as Risk Group 2 (RG2) according to
IEC 62471-5:2015.

1

WUX7000Z WUX6600Z WUX5800Z

2

2

2

2

17

Safety Instructions

Hazard Distance

• During projection, looking into the lens from distances closer than this poses a

risk of vision impairment or other serious injury.

• When a projection lens with a hazard distance indicated on it is used with the
projector, the operator shall either install the product at a height that will prevent
eye exposure within the hazard distance or control access to ensure that persons
do not approach within the hazard distance.

Laser Light Source

• The projector is designated as a Class 1 laser product according

to IEC/EN 60825-1:2014.

• The equipment is designated as a Class 3R laser product
according to IEC/EN 60825-1:2007.

• Complies with FDA performance standards for laser products
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.

• Laser parameters

Wavelength: 450 nm – 460 nm
Maximum power: 144 W
Beam divergence: 2°

• The projector incorporates a laser module. Disassembly or
modification is dangerous and must not be attempted.

• Operate and adjust the projector only as described in this
manual. Incorrect operation or adjustment poses a risk of
exposure to potentially hazardous laser light.

• Do not use when damaged. Even if the projector is used as
described in this manual, failure to discontinue use when it is
damaged (as indicated by screen abnormalities) may result in
fire, electric shock, or eye injury from laser light.

• For assistance when disposing of the projector, contact the
Canon Customer Support Center. Do not disassemble the
projector yourself when disposing of it.

• Do not attempt to install or remove the lens unit yourself. Be sure
to request this service from a qualified technician or contact the
Canon Customer Support Center.

18

Safety Instructions

Explanatory and warning labels are located in the following positions on the
projector.

Safety Instructions

19

Safety Instructions

20

Safety Instructions

Remote Control Batteries

Pay attention to the following points regarding handling of batteries. Failing to do so
could result in a fire or personal injury.

• Do not heat, short circuit or disassemble the batteries, or place
them in a fire.

• Do not attempt to recharge the batteries that are included with
the remote control.

• Remove the batteries when they are flat or when the remote
control will not be used for a long period of time.

• When replacing the batteries, replace both at the same time.
Also, do not use two batteries of a different type at the same
time.

• Insert the batteries with the + and – terminals in the correct
directions.

• If any liquid from inside the batteries leaks out and contacts your
skin, be sure to wash the liquid off thoroughly.

Safety Instructions

Handling

Pay attention to the following points regarding installation and handling of the projector.

• If the projector will not be used for a long period of time, be sure
to remove the power plug from the power outlet to ensure safety.
Failure to do so presents a risk of fire if dust accumulates on the
plug or outlet.

• Do not plug headphones or earphones into the AUDIO OUT
terminal. Doing so may cause hearing impairment.

• Do not set the volume too high initially. Doing so may cause
hearing impairment from sudden sounds played at high volume.
Lower the volume before turning off the projector, and after
startup, raise it gradually.

• Do not touch parts of the cabinet around and above the exhaust
vents, which may become hot during projection. Pay particular
attention in preventing young children from touching these parts.
Additionally, do not place any metal objects around or above the
exhaust vents. Such objects may become hot from the projector,
which may result in burns or other injury.

21

Safety Instructions

Pay attention to the following points regarding installation and handling of the projector.

• Do not place any heavy objects on top of the projector or sit/
stand on it. Pay particular attention to prevent small children from
doing so. The projector may be knocked over and this could
result in damage or a personal injury.

• Do not place the projector on an unstable or slanted surface.
Doing so may cause the projector to fall or be knocked over and
could result in a personal injury.

• Do not place any objects in front of the lens
during projection. Doing so could cause a fire.

• The projector is provided with a lens shift
function to move the lens up, down, left, and
right using the motor. Do not touch the lens while it is moving.
Touching the lens when it is moving may result in personal injury.

• Before replacing the lens unit, wait at least 30 minutes after the
projector is turned off to allow the lens unit to cool down. Failure
to do so may result in burns or injury.

22

For Safe Use

Carrying and Installation

Pay attention to the following points when carrying or transporting the projector.

• If transportation is necessary, the lens unit should be removed before
transporting the projector. If the projector is subjected to excessive impacts
during transportation, the lens unit may be damaged.

• This projector is a precision instrument. Do not knock it over or subject it to
impacts. Doing so may cause a malfunction.

• Retract the adjustable feet before moving the projector. Leaving the feet
extended may cause damage.

• When carrying or holding up the projector after attaching the lens unit, be
sure not to hold the lens. Doing so may cause damage to the lens unit.

• Do not touch the lens with bare hands. Any smudges or fingerprints on the
lens may affect image quality.

• Protection of the projector cannot be guaranteed if used packaging or shock­absorbent materials are reused. Fragments from shock-absorbent material
may also enter the interior of the projector which could cause a malfunction.

For Safe Use

23

For Safe Use

At least
50 cm (1.6')

At least
50 cm (1.6')

At least
50 cm (1.6')

At least
50 cm (1.6')

At least
2cm (0.8")

Pay attention to the following points when installing or using the projector.

• Be careful of condensation.
If the projector is abruptly taken to a warmer location, or if the room
temperature rises abruptly, moisture in the air may condense on the lens or
mirror and affect projected images. In this case, wait a while and make sure
the moisture has evaporated before resuming use.

• Do not install the projector in a location where the temperature is high or low.
Doing so may cause a malfunction. Ranges for the environment of use and
storage are as follows.

• Environment of use: 0°C (32°F) to 45°C (113°F), 20% to 85% RH

• Storage temperature: -20°C (-4°F) to 60°C (140°F)

• When using the projector at altitudes above 2,300 m (7,545.8'):

Adjust projector installation settings from the menu (P154).

• Install the projector leaving at least 50 cm (1.6') between air intake/exhaust
vents and walls on each side of the projector. Leave a gap of at least 2 cm
(0.8") from the bottom of the projector. There is an air intake underneath the
projector. Failure to leave enough space may trap heat inside the projector
and damage it.

• Do not place any objects on top of the projector that may change shape or
color due to heat.

• Do not install the projector near high-voltage electrical power lines or an
electrical power source. This may cause malfunction.

• Afterimages may occur when the image changes after the same image has
been projected for some time. This is due to the nature of the LCD panels
and does not indicate a problem. The afterimage will dissipate after a while
during normal projection.

24

Before Installation

Precautions When Carrying / Shipping the Projector

Prepare the projector as described below before carrying it.

• Disconnect the cables connected to the projector. Carrying the
projector with the cables attached may cause an accident.

• Retract the adjustable feet before moving the projector. Leaving
the feet extended may cause damage.

• Do not subject the projector to strong impacts or vibrations.

Precautions for Installation

Be sure to read “Safety Instructions” and “For Safe Use” (P7 – P23). Also
take the following precautions during installation.

• Do not strike the projector or subject it to impact. Doing so may
cause a malfunction.

• Do not install the projector standing on one side or in other
unsteady positions. The projector may be damaged if it tips
over.

Before Installation

■ Do Not Use in the Following Environments

• Locations with excessive humidity, dust, oily smoke or tobacco
smoke

Adhesion to the lens, mirrors or other optical parts may reduce image
quality.

• Near high-voltage power lines or sources of electrical power

This may cause malfunction.

• On soft surfaces such as carpets or cushioned mats

This may cause a fire or damage the projector.

• Locations with excessive temperature or humidity

• Locations subject to vibration or impact

• Near heat or smoke detectors

• Near the ocean, or near air conditioner vents

• Locations where corrosive gases occur, such as sulfur gas from
hot springs

This may damage the projector. Acceptable ranges for operating and
storage temperature and humidity are as follows.
* Operating temperature and humidity applies to when the projector

is projecting or in standby mode.

Operating temperature Operating humidity Storage temperature

0°C (32°F) – 45°C (113°F)

20%

–

85%

-20°C (-4°F) – 60°C (140°F)

25

Before Installation

Exhaust vent

Air intake vent

Warmed
airflow

Air intake vent

■ Do Not Touch the Lens with Bare Hands

Do not touch the lens with bare hands. Any smudges or
fingerprints on the lens may affect image quality.

■ Allow a 30 Min. Warm Up before Focus Adjustment (P48),
if Possible

Immediately after startup, the heat of the light source may prevent stable focus.
When adjusting focus, it is also helpful to use the test pattern (10) (P107, P160).

■ Install at a Sufficient Distance from Walls and Other Obstructions

If the air intake or exhaust
vent is blocked, heat will
accumulate inside the
projector, possibly resulting
in a shortened projector
lifetime or a malfunction.
Similarly, do not install in
narrow, enclosed spaces
with poor ventilation. Install
in a well-ventilated location.
Ensure a minimum
clearance of 50 cm (1.6')
above, on both sides, and behind the projector. Also ensure a
minimum clearance of 2 cm (0.8") below the projector.

■ Be Careful of Condensation

If the temperature of the room rises suddenly, moisture in the air may condense on
the projector lens and mirror, causing the image to become blurred. Wait until the
condensation has evaporated for the image projected to return to normal.

■ At Altitudes above 2,300 m (7,545.8'), Adjust the Settings

Projector settings must be adjusted when using the projector at altitudes of 2,300 m
(7,545.8') or higher. Specifically, refer to instructions for [High altitude] (P154) in the
[Install settings] menu.

26

Before Installation

■ When Using Mounted on the Ceiling

When the projector is used mounted on
the ceiling or installed in a high
location, it is necessary to periodically
clean the air intake and exhaust vents,
and the area around the air filter. Dust
that accumulates in intake or exhaust
vents may impair ventilation, raising the
temperature inside and posing a risk of
damage or fire. Use a vacuum cleaner
or similar means to remove dust from
the intake vent and exhaust vent.

■ Install Facing in the Correct Direction

• Projection is possible upward, downward, or in a variety of
directions, but do not block the air intake and exhaust vents. In
particular, always ensure a minimum clearance of 2 cm (0.8")
from the air intake vent on the bottom of the projector.

• There are no options for installing the projector other than the
ceiling attachment.

Before Installation

27

Before Installation

■ Precautions for Portrait (Upright) Installation

• Do not block the air intake or exhaust vents. In particular,
because there is an air intake vent on the bottom, always ensure
a minimum clearance of 2 cm (0.8") from the bottom.

• Note that no mounting brackets or similar accessories for
portrait installation are available.

■ Light Source

The projector uses laser as a light source. The laser has the following
characteristic.

Factors such as long-term use and environmental changes may
affect image quality. You can counteract changes in brightness
from hours of use or the ambient temperature by performing
[Light source calibration] in [Calibration] (P180).

28

Before Installation

Copyright Notice

Please note that enlarging or reducing the size of an image for commercial
purposes or public presentation may infringe on the legally protected copyright
or the copyright holder of the original material.

Ensure Network Security

Take measures to ensure network security. Note that Canon is not liable in any
way for direct or indirect loss from network security incidents, such as
unauthorized access.

Before use, configure projector, computer, and network security settings
appropriately.

• Set up the projector for connections only within your protected network,
behind a firewall or the like, instead of direct Internet connections.

• When using the projector in a wireless network, also configure the Wi-Fi
security settings.

• Change the Wi-Fi security key on a regular basis.

About Trademarks

• Ethernet is a registered trademark of Xerox Corporation.

• Microsoft and Windows are registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• Mac, Mac OS and Macintosh are trademarks of Apple Inc., registered in the
United States and/or other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.

• PJLink is a registered trademark of JBMIA and pending trademark in some
countries.

• PJLink is a registered trademark, or an application has been submitted for
trademark, in Japan, the United States and/or other countries or regions.

• AMX is a registered trademark of Harman International Industries, Inc.

• Crestron®, Crestron RoomView®, and Crestron Connected™ are registered

trademarks of Crestron Electronics, Inc.

• Extron and XTP are trademarks or registered trademarks of RGB Systems,
Inc. in the United States and/or other countries.

• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT
Alliance.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi CERTIFIED, WPA, WPA2, and the Wi-Fi CERTIFIED logo are used in

reference to methods of configuration developed by the Wi-Fi Alliance.

• All other trademarks are the property of their respective owners.

Before Installation

29

Before Installation

Complies with

IMDA Standards

DB00671

Wireless LAN (Wi-Fi)

■ Countries and Regions Where Wireless LAN Use Is Permitted

Use of the wireless LAN function is restricted under the laws, etc., of each country
and region, and violation of these restrictions may be subject to punishment. Check
the Canon website for a list of countries and regions where use of the wireless LAN
function permitted.
Canon assumes no responsibility whatsoever for problems, etc., that may arise from
use of the wireless LAN function in countries and regions other than those listed.

■ Model Number

WUX7000Z/WUX6600Z/WUX5800Z (including WLAN module model: ES202)

Statement on EC directive

Hereby, Canon Inc. declares that this equipment is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the
following Internet address:
http://www.canon-europe.com/ce-documentation

Wireless LAN Specifications
WUX7000Z/WUX6600Z/WUX5800Z

Frequency band(s): 2,401 MHz – 2,473 MHz
Maximum radio-frequency power: 9.48 dBm

FCC/IC NOTICE
Model: WUX7000Z/WUX6600Z/WUX5800Z (including WLAN
Module Model ES202, FCC ID: AZD239)

This device complies with Part 15 of FCC Rules and ISED’s applicable licence­exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of this
device.

This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter except Canon accessories supplied or designated for this
product.

This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20 cm or
more away from person’s body.

30

Open Source Software

The product contains Open Source Software modules.
For details, check the files obtained from “Software Used in This Product” on the
download site (http://www.canon.com/iprj/). Please refer to the license information
for each module, which is contained in the corresponding file.

Some third-party software permits the distribution of software modules in
executable form only under the condition that the source code of such modules be
made available freely. For information on how to acquire the source code for such
third-party software, contact the distributor from whom the product was purchased.

Open Source Software

31

Before Use

• Remote control • Batteries for the remote control

(AAA size x2)

(part no.: RS-RC07)

• Important Information

• Warranty Card

• Power cord

(1.8 m / 5.9')

For Continental
Europe

For the U.S.A.
and Canada

Included Accessories

Before use, make sure the following items are included in the package.

32

Before Use

(7) (5)

(3)

(4)

(1)

(2)

(6)

(8)

Do not block the air
intake. Doing so may
cause a malfunction.

(9)

(11)

(10)

(4)

Do not block the air
exhaust. Doing so may
cause a malfunction.

(12)

(4)

(13)

Projector Part Names and Functions

■ Front Side

■ Rear Side

(1) Power cord connector (P82)
(2) Infrared remote receiver

(P41)
(3) Lens unit (sold separately)
(4) Air intake vent

(5) Side control (P34)
(6) Terminals and connectors

(P37)
(7) Anti-theft lock hole

An anti-theft wire cable (not

included) can be connected.

(8) LED indicators (P35)

(9) Exhaust vent

Before Use

■ Bottom Side

(10) Infrared remote receiver

(P41)
(11) Air filter frame (P217)

(12) Adjustable feet (P76)
(13) Security bar

33

Before Use

(1) POWER button (P46, P51)

Turns the projector on or off.

(2) INPUT button (P47)

Switches the input signal.

(3) LENS button

Each time the button is pressed,
the screen changes to focus
adjustment (P48), zoom (image
size) adjustment (P48), or lens shift
(image position) adjustment (P70).
To adjust, use the [ ] / [ ] or the
[ ] / [ ] buttons.

(4) MENU button (P121)

Displays a menu on the screen.

(5) Pointer / VOL buttons (P119)

Up, down, left, or right in menu
navigation or other operations.
Adjusts the sound volume.
[] VOL+ button: Increases the
volume.
[] VOL– button: Decreases the
volume.

(6) OK button (P119)

Determines the item selected from
the menu.

(4)

(1)(3)

(6)

(2)

(5)

■ Side Control

34

Before Use

■ LED Indicators

The projector status is shown by the LED indicators (off / lit / flashing).

• POWER (green) : Illuminated during projection.
Otherwise, flashes in the following
situations.

• As the projector transitions from standby

to projection

• While the light source is off in power

management mode

• STANDBY (red) : Illuminated during standby mode.
Otherwise, flashes in the following
situations.

• As the projector transitions from

projection to standby

• While the light source is off in power

management mode

• WARNING (red) : Lights up or flashes when an error occurs.

• LIGHT (orange) : Lights up or flashes when a problem

occurs with the light source.

Before Use

• TEMP (red) : Lights up or flashes when the internal
temperature is high.

35

Before Use

LED Indicator Displays

The LED indicators flash or illuminate to indicate the operating status of the
projector.

Legend: Example of when the POWER indicator is on; : Off : Lit : Flashing

LED indicator

POWER

(green)

STANDBY

(red)

WARNING

(red)

LIGHT

(orange)

TEMP

(red)

Projector not plugged in.

In standby mode.

Power is on. (Projecting.)

Resuming operation (projection) after
standby.

Cooling down while entering standby or
power management mode from power
on.

In power management mode, with the
light source off. (Flashes green and
then red.)

Internal temperature is high (in standby
mode).

Internal temperature is high (during
projection).

An error has occurred with the light
source unit.

A temperature error has occurred.

Flashes 3 times: Air filter error
Flashes 4 times: Fan error
Flashes 5 times: Power error
Flashes 6 times: Lens unit error

Operating status

36

Before Use

(7)

(1)

(4)

(6)

(8)

(9)

(2)

(10)

(3)

(5)

■ Terminals and Connectors

(1) LAN / HDBaseT port (P81, P83)

Receives HDBaseT input including digital video and audio signals.
Carries both video and audio signals across a single LAN cable (shielded
twisted pair).
This port can also be used to connect the projector to a network.

(2) AUDIO OUT terminal (P81)

Outputs the audio to external AV equipment. This outputs the audio signal that
corresponds to the projected image signal.

(3) AUDIO IN terminal (P81)

Receives audio input. Audio supplied to this terminal is played through the
internal speaker when you set [Audio in terminal select] to [Audio in] (P169).

(4) Terminal for wired remote control (P42)

This terminal is used to connect the optional remote control (RS-RC05) using a
cable.

Before Use

(5) DisplayPort port (P79)

Receives DisplayPort input including digital video and audio signals.
Carries both video and audio signals across a single cable.

(6) HDMI terminal (P78)

Receives HDMI input including digital video and audio signals.
Carries both video and audio signals across a single cable.

(7) DVI-I terminal (P79)

Connects the external monitor output from a computer.
Receives digital PC signal (Digital PC).
A VGA-DVI-I cable can also be used to receive analog computer signals
(Analog PC-1).

(8) Analog PC-2 / COMPONENT terminal (P80)

Receives the analog PC signal (Analog PC-2).
A component cable can be used to receive the component image signal
(Component).

(9) Service port (P226)

Used to control the projector with user commands (P227 – P228).

(10) USB port (P56, P114, P135, P180)

Connects a USB flash drive. Used for projection of images on a USB flash
drive, or for firmware updates.

37

Before Use

(1)

(2)

(3)

(4)

(5)

(7)

(6)

(8)

(9)

(10)

(11)

(12)

(13)

Remote Control

■ Part Names and Functions

(3) Fn button (P168)

Can be assigned a specific function.

(4) Pointer buttons (P119)

Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control.

(5) OK button (P119)

Determines the item selected from the
menu.

(6) FOCUS button (P48)

Adjusts focusing.
[ ] / [ ] buttons:
Moves the focus position further away.
[ ] / [ ] buttons:
Moves the focus position nearer.

(1) POWER button (P46, P51)

Turns the projector on or off.

(2) D.ZOOM button (P55)

Zooms the image in or out digitally.
[1] button: Zooms the image in (up to

12x).

[4] button: Zooms the image out (1x

minimum).

[ ] / [ ] / [ ] / [ ] buttons:

Move the zoom-in location.

(7) ZOOM button (P48)

Adjusts the image size.
[ ] / [ ] buttons:
Increase the image size.
[ ] / [ ] buttons:
Decrease the image size.

(8) INPUT A-C button (P168)

Can be assigned to input signal selection
(one source for each of the three buttons).

(9) ASPECT button (P102, P131)

Changes the aspect ratio of the
projected image.

(10) TEST PATTERN button (P160)

Displays the test pattern.

(11) Ch button (P168)

Changes the remote control channel.

(12) IMAGE button (P49)

Switches the image mode (image
quality).

(13) FREEZE button (P52)

Freezes the projected image.

38

Before Use

(14)

(15)

(16)
(17)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

(19) EXIT button (P120)

Cancels functions such as menu
display or test pattern during operation
and returns to the image display.

(20) LENS-SHIFT button (P70)

Moves the lens up, down, left, or right.
[ ] / [ ] / [ ] / [ ] buttons:
Moves the image.

(21) KEYSTONE button (P103)

Corrects keystone distortion.
The [Keystone] setting enables both
horizontal/vertical keystone correction
(by adjusting top/bottom/left/right
length) and corner correction.

• Moves the image up, down, left, or
right when the screen aspect setting
is [16:9 D. image shift] or [4:3 D.
image shift].

• To move the image, use the [ ] / [ ]
or the [ ] / [ ] buttons.

(22) AUTO PC button (P131)

Adjusts the image for optimal projection
of computer signals when analog PC
input is used.

(23) SPLIT button (P60)

Activates the split screen function.

Before Use

(14) INPUT button (P47)

Switches the input signal.

(15) VOL button (P54)

Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.

(16) Number buttons (P174, P183,

P185)

Enter password and TCP/IP setting
values.

(17) MUTE button (P54)

Mutes the sound.

(18) MENU button (P121)

Displays a menu on the screen.

(24) BLANK button (P52)

Temporarily blacks out the image.

39

Before Use

■ Installing Remote Control Batteries

1 Open the battery

compartment lid.

Slide the lid while
pressing it down.

• If buttons on the remote control are inoperative when you attempt to operate the
projector, replace the batteries with new ones.

• Do not drop the remote control or subject it to impact.

• Do not spill any liquids on the remote control. Doing so may cause a malfunction.

Pay attention to the following points when handling the batteries.
Failing to do so could result in a fire or personal injury.

• Do not heat, short circuit or disassemble the batteries, or place
them in a fire.

• Do not attempt to recharge the batteries that are included with the
remote control.

2 Insert batteries.

Insert 2 new AAA
batteries in the
compartment with the +
and – terminals
positioned correctly.

3 Close the

compartment lid.

Slide the lid until you
hear a click to securely
close it.

• Remove the batteries when they are flat or when the remote
control will not be used for a long period of time.

• When replacing the batteries, replace both at the same time. Also,
do not use two batteries of a different type at the same time.

• Insert the batteries with the + and – terminals in the correct
directions.

• If any liquid from inside the batteries leaks out and contacts your
skin, be sure to wash the liquid off thoroughly.

40

Before Use

25°

25°

8 m (26.3')

8 m (26.3')

25°

25°

■ Remote Control Operating Range

The remote control is an infrared type. Point it at the infrared remote receiver on the
front or rear of the projector to operate it.

• Use the remote control no further than approximately 8 m (26.3') from the projector.

• Use the remote control within an angle of 25° in any direction from directly in front of the
infrared remote receiver.

• The remote control may be inoperative if there is an obstacle between the remote
control and the projector or the infrared remote receiver on the projector is exposed to
direct sunlight or strong light of lighting equipment.

• When you use 2 or more projectors at the same time, change the channel settings to
prevent the 2 remote controls from interfering with each other (P168).

Before Use

41

Before Use

ø3.5 mm stereo mini jack cable

(not included)

Terminal for wired

remote control

Remote control

(RS-RC05)

■ Using an Optional Wired Remote (RS-RC05)

To use a wired remote control with the projector, use the RS-RC05, sold separately.
Use a cable with a ø3.5 mm stereo mini jack (not included).

• Infrared operations cannot be performed if a cable is connected to the projector or the
remote control.

• Use a cable with a ø3.5 mm stereo mini jack (not included) with a length of 30 m (98.4')
or less.

42

Basic Guide

43

Projection Procedure

Step 1 Connect Other Equipment (P45)

Configure the computer’s network settings (P86)

Step 2 Turn the Projector On (P46)

Step 3 Select an Input Signal (P47)

Step 4 Adjust the Image (P48)

Step 5 Select the Image Quality (Image Mode) (P49)

Other Projection

Turn the Projector Off (P51)

• Projecting images stored on a USB flash drive

(P56)

• Split-screen display from multiple connected
devices (P60)

• Projecting a single image from multiple projectors
(P114)

The steps to prepare for projection are as follows.

44

Projection Procedure

HDMI input

Computer input

DisplayPort
input

Step 1 Connect Other Equipment

Basic Guide Projection Procedure

When you connect a computer to the network, you will need to complete the IP address
settings. For details, see “Configuring the Computer’s Network Settings” (P86).

45

Projection Procedure

Remote control

Projector

Step 2 Turn the Projector On

1 Press the POWER button.

2 Turn on the computer or other equipment.

• If a window is projected for menu language selection, use the pointer buttons to choose
a language, and then press the OK button.

• If you have set a password, the password input screen appears. Enter your password
(P174, P175).

• When “No signal” appears, press the INPUT button to select the input signal.

• If a computer screen is not projected, adjust the display settings on the computer. For
details about how to switch display output, refer to the manual for your computer.

46

Projection Procedure

INPUT button

INPUT button

Remote control

Projector

In split-screen mode

In single-image mode

Step 3 Select an Input Signal

To switch between signals from connected devices, select an input signal in the
[Input] menu.
The selected signal changes each time you press the INPUT button, or each time
you press the [ ] / [ ] buttons when the [Input] window is shown.
The currently active input signal is marked with a green circle and enclosed by a
orange border.
Names of input signals available for projection are displayed in white, and
unavailable signal names are grayed out.

Basic Guide Projection Procedure

• [Digital PC] and [Analog PC-1] may be grayed out even when available.

• Screens of computers connected to the projector over a network can be projected

• Images on USB flash drives can be projected when you have selected [USB] as the

• In split-screen mode, the side without control rights is identified by a white circle.

• Input signals can also be selected by using the INPUT A-C buttons on the remote

when you have selected [LAN] as the input signal. For details, refer to the NMPJ user’s
manual.

input signal. For details, see “Projecting Images on a USB Flash Drive” (P56).

control, depending on settings. For details, see “[INPUT A-C] button settings” (P168).

47

Projection Procedure

LENS button

FOCUS button

ZOOM button

Remote control

Projector

Focus adjustment Zoom adjustment

Step 4 Adjust the Image

■ Adjusting the Computer’s Output Resolution

The projector’s maximum resolution is 1920x1200 (P219).
For details on adjusting your computer’s output resolution, refer to the manual for
your computer.

■ Focusing / Resizing the Image

Press the ZOOM button on the remote control to adjust the image size, and press
the FOCUS button to adjust the focus. You can also press the LENS button on the
projector once to adjust focus and twice to adjust image size.

• Use the Auto PC function to adjust shift in computer image or the flickering of the
screen (P131).

• Correct any keystone distortion by pressing the KEYSTONE button (P103).

• Select the screen aspect or projection aspect according to the aspect ratio of the
screen, type of input image signal etc. (P99 – P101).

• Select an image mode depending on the projected image.

48

Projection Procedure

Remote control

Step 5 Select the Image Quality (Image Mode)

Pressing the IMAGE button on the remote control, you can select an image mode
to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, HDR range, color adjustment, advanced adjustment, light source mode
(P147) and brightness level (P147).

■ Image Modes

Details

Image mode

Standard

Presentation

Dynamic

Video

Photo/sRGB

DICOM SIM

User 1 – 5

(1) Ambient Brightness
(2) Types of Images
(3) Effect on Projection

(1) Bright
(2) Computer screens, or media played with video software
(3) Whites and natural colors

(1) Bright
(2) Images mainly consisting of text
(3) Keeps the screen bright

(1) Bright
(2) Media played with video software
(3) Keeps the screen bright

(1) Somewhat dark
(2) Video from camcorders
(3) Close to the color space of TVs

(1) Somewhat dark
(2) Digital photos from sRGB-compatible cameras
(3) Conforms to the sRGB standard

(1) Somewhat dark
(2) Monochrome images (medical use, for example)
(3) Adjusted to the GSDF curve specified in DICOM Standard Part 14

Up to 5 user-selected combinations of image quality settings can be
stored in the memory (P140). Stored settings can be selected as an
image mode.

Basic Guide Projection Procedure

49

Projection Procedure

■ Projecting an Image in the DICOM SIM Mode

In the DICOM simulation mode (hereinafter referred to as “DICOM SIM”), this
projector can project a monochrome medical image such as an X ray radiography,
CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and
Communications in Medicine) standard. Typically, to project the image according to
the DICOM standard, it requires the grayscale tone correction using a luminance
meter according to the environment. In this projector, there are 21 types of tone
settings for various ambient lights. You can correct the tone in a simplified manner
by selecting the DICOM test pattern (P107).
It is suited to project an image in a medical lecture, academic conference, in­hospital conference, etc.

This projector is not the display monitor for a medical image. It cannot be used for
the radiological image reading or medical examination.

• It is recommended to check the tone everytime when using this
projector since it does not have the tone correction and
calibration functions against the secular change.

• It may take approximately 30 minutes until the projection
brightness of this projector becomes stabled.

Switching the mode to the DICOM SIM Mode

1 Press the IMAGE button on the remote control until [DICOM SIM] is

displayed or select [DICOM SIM] from [Image mode] in the [Image
adjustment] menu.

2 Display test patterns by pressing the TEST PATTERN button on the

remote control or selecting [On] in [Test pattern] of the [Install settings]
menu. Press the [ ] / [ ] buttons to select the DICOM test pattern.

50

Projection Procedure

Remote control

Projector

3 As you view the test pattern, perform [Gamma] (P141) adjustment from

the [Image adjustment] menu until the image is optimal.

4 Press the OK button after the setting.

Perform one of the followings to obtain an appropriate projection:

• Darken the ambient light

• Reduce the image size

• Reduce the projection distance

Turn the Projector Off

1 Press the POWER button.

Basic Guide Projection Procedure

2 When this window is displayed,

press the POWER button again.

After you turn the projector off,
projection stops, the [STANDBY]
indicator flashes in red, and the
projector starts cooling down. After
cooling down, the projector enters
standby mode. In standby mode,
the [STANDBY] indicator remains lit
instead of flashing.

• If you want to continue projecting without turning off the power, press a button other
than POWER, or else wait until the confirmation message disappears.

• The projector cannot be turned on while cooling down.

• Using the projector for extended periods may shorten the life of the internal optical
components.

• Unplug the projector if it will not be used for an extended period. Note that the [Date
and time] setting will be reset, so you will need to set it again.

• In power management mode, the projector may go off automatically after some time
(P171).

51

Convenient Projection Features

Remote control

Remote control

Screen

Convenient Features

This section describes convenient features during presentations and in other
situations.

Temporarily Blacking Out an Image

Projection can be temporarily blanked after a presentation, or to divert the
audience’s attention away from the screen.

Press the BLANK button on the remote control to black out the
image.
Press the BLANK button again to show the image.

• You can set the screen state while blacking out the image in the menu
(P162).

Freezing the Picture

Projection can be temporarily frozen during computer operations that would be
distracting, or to pause playback of video or animation.

Press the FREEZE button on the remote control to freeze the
moving image. The following icon appears.
Press the FREEZE button again to return to the original display.

• It is also cancelled when the input signal is terminated.

52

Convenient Projection Features

Projecting a Test Pattern from the Menu

Even without any input signals, the projector can project a test pattern. Test
patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Test pattern” (P160) or “Adjustment
Using a Test Pattern” (P107).

Specifying Power-Saving Settings

Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.

• Light source mode (P147)

Conserve energy by selecting a mode that is less bright.

• Standby power settings (P171)

Conserves energy in standby mode by disabling some network functions.

• Power management mode (P171)

Automatically turns off the light source or the power after a certain period if the
projector is idle without an input signal.

Basic Guide Convenient Projection Features

• Power management duration (P172)

Specify the period after which the light source or projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Light source off] or [Standby].

53

Convenient Projection Features

Remote control

Remote control

Screen

Adjusting the Volume

Useful when:

• You want to adjust the volume level of the projector or external speakers.

Press the VOL button. The following screen appears.

• You can also adjust the volume level with the [ ] / [ ] buttons of the

projector.

• Adjust the volume or mute setting on the computer if the volume level is too

low.

• You can also adjust the volume level of the speakers connected via the

audio output terminal.

Muting the Sound

Useful when:

• You want to temporarily mute unnecessary sound.

• You want to immediately mute the sound.

Press the MUTE button on the remote control to mute the sound.
The following icon appears.

Press the MUTE button again to cancel the mute function.

• You can also mute the sound of the speakers connected via the audio output terminal.

54

Convenient Projection Features

Remote control

Screen

Screen

Remote control

Projector

Zooming Part of an Image

Useful when:

• Zooming in on an object such as a small graph during a presentation (up to 12x).

• Focusing on the current subject.

Press the +D.ZOOM button
on the remote control to
enlarge a part of the image.
Press the –D.ZOOM button
to reduce the image size.

• The magnification appears on
the screen.

You can move the enlarged area by using the [ ] / [ ] / [ ] / [ ] buttons.

You can restore the original size of the image by pressing the OK button.

Basic Guide Convenient Projection Features

The D.ZOOM buttons work differently than [Zoom] in the [Install settings] menu (P151).

55

Convenient Projection Features

Remote control

Projector

Projecting Images on a USB Flash Drive

JPEG images stored on a USB flash drive connected to the projector can be
projected. Individual images can be selected for projection, or you can project all
images in a slideshow.
JPEG images up to 10912x8640 can be projected.

1 Insert a USB flash drive in

the USB port.

2 Press the INPUT button to select [USB].

3 In the USB file browser,

select a file for projection.

For details on the USB file
browser, see “Description of
USB File Browser” (P57), and
for details on choosing files,
see “Selecting an Image for
Projection” (P59).

A USB card reader can also be used in the USB port.

56

Convenient Projection Features

Thumbnail view List view

(1)

(2)

(3)

(4)

(1)

(2)

(3)

(4)

(5)

Ending Projection

Remove the USB flash drive.

• USB flash drives with security features are not recognized by the projector and cannot
be selected as the image source.

• If the projector cannot mount the file system, the drive name is grayed out and the
following icon is displayed. In this case, the USB flash drive cannot be used.

• Up to six USB flash drives, 999 folders, or 9,999 files can be displayed.

• If there are multiple drives, a drive selection screen is displayed. Use the
buttons to select the desired drive, and then press the OK button. Files on the drive are
now listed.

• On file and drive selection screens, you can switch between thumbnail and list display.

• Network input is not available when [USB] is selected as the other input signal in split­screen display.

• Motion blur reduction is not available when projecting JPEG files on a USB flash drive
(P172).

• The projector can also play a slideshow of images on a USB flash drive automatically
(P59).

[] / []

■ Description of USB File Browser

When a USB flash drive is connected to the projector, the USB file browser
appears.
In the USB file browser, you can select the image file to be projected by operating
the file list in the USB flash drive.

Basic Guide Convenient Projection Features

(1) List title

Identifies the current USB flash drive and number of pages in the file list displayed
(Current page number/total number of pages).

(2) Drive/file list

Lists recognized USB flash drives and files in folders on the drive, by name. Select
an image file or folder with the pointer buttons. The following icons are shown.

57

Convenient Projection Features

Icon Function Icon Function

(3) File information area

Information of the image selected in the file list appears here.

Recognized USB flash drive (in
thumbnail view)

Correctly displayed USB flash drive
(in list view)

Unrecognized USB flash drive (in
thumbnail view)

Unrecognized USB flash drive (in list
view)

No removable media in the card
reader or similar device (in thumbnail
view)

No removable media in the card
reader or similar device (in list view)

File or folder names in Arabic are not displayed correctly.

Switch to list view (in thumbnail view)

Switch to thumbnail view (in list view)

Go to the parent folder

Folder

Unsupported JPEG file (in thumbnail
view)

• File name • File size • Shoot. d/t

• Image size • Camera model • Shoot. cond.

(4) File path area

Path name of the image selected in the file list appears here.

(5) Preview area (in list view)

Image selected in the Drive/file list appears with reduced size. is displayed
when an unsupported JPEG format is selected.
If a folder is currently selected, the folder icon appears.

58

Convenient Projection Features

■ Selecting an Image for Projection

This section describes the steps for selecting an image in the USB file browser and
projecting on the screen.

Selecting a Drive

This step may not be necessary when a USB flash drive is connected directly to the
projector’s USB port.
If a USB memory card reader having multiple memory slots is connected, the drive
(memory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted with [ ] / [ ], and press the

OK button.

• Active drives are displayed in white text, while inactive drives are grayed out.

Selecting a Folder

Folders that contain images can be selected.

• To return to the higher level, select [ ].

Selecting an Image File for Projection

In list view, when you select an image file, a small preview of the image is shown in
the preview area.
For full-screen projection of the image, press the OK button.
To return to the higher level, select [ ].

Basic Guide Convenient Projection Features

Changing the View

To switch the view, select [Thumbnail view] or [List view] in the Drive/file list and
press the OK button.

■ Controlling Images in Full-Screen Projection

When images are projected, you can perform the following operations.
Project the previous or next image by pressing the [ ] / [ ] buttons.
Rotate images left or right 90° by pressing the [ ] / [ ] buttons.
Return to the USB file browser by pressing the OK button.

• These operations are also available during slideshows. (Except when [Animation
effect] is enabled.)

• If the image contains rotational information, the image is rotated to an appropriate
direction automatically.

■ Running a Slideshow of Data Saved in a USB Flash Drive

Multiple images on a USB flash drive can be projected consecutively, with each
shown for a specific interval.

Setting a Slideshow Interval

Set the projection interval in [Slideshow interval] (P134) in the menu.

59

Convenient Projection Features

Remote control

Projecting Two Images Side by Side

Images from two connected devices
can be projected side by side. This
is split-screen display. When you
activate split-screen display, the
current image is shown on the left
side, and the new image is shown at
right. You can change the source of
images shown on each side by
pressing the INPUT button.
Supply two signals to the projector.
You can combine the following input
in split-screen display.
Note that split-screen display is not
available for some combinations of input signals.

Split-Screen Combinations

Right image

Left

image

HDMI

DisplayPort

Digital PC

Analog PC-1

Analog PC-2

Component

HDBaseT

LAN

USB

HDMI DisplayPort Digital PC

—————**

—————**

—————**

—————**

————— **

******* —

*******—

Analog PC-1 Analog PC-2

————— * *

Component HDBaseT LAN USB

**

—: Cannot be combined

To start split-screen display, press the SPLIT button on the remote control.

A number is displayed in the center of one image area. The left image is “1,” and
the right image, “2.” The image labeled with a number has “control rights,” and the
sound for that image will be played.

: Can be combined

*: Can be combined (50:50 display)

60

Convenient Projection Features

Remote control

Side currently under control
(input signal can be switched)

Current input signal
(without control rights)

Current input signal
(with control rights)

■ Switching Input Signals

If or is displayed in the center of the image area, you can switch control rights
to the other side by using the [ ] / [ ] buttons on the remote control.

Press the INPUT button, and then select the input signal for the side with control
rights.
To determine which side is currently under your control, check the image ID in
orange in the upper right of the menu.
The side without control rights is labeled with a white circle.

Basic Guide Convenient Projection Features

• Display of the centered number fades in a while, but you can view it again by pressing
the SPLIT button on the remote control.

• To exit split-screen display, press the EXIT button on the remote control.

• You can also switch to split-screen display by selecting [Split screen] in the [Input
settings] menu (P136).

• Some functions cannot be adjusted, such as [Sharpness] (P141), [Dynamic gamma]
(P144), and [Motion blur reduction] (P172).

• Some functions are not available, such as [Image flip H/V] (P150), [Screen aspect]
(P151), [Keystone] (P152) and [Logo capture] (P162).

• For split-screen image adjustment, use the [Image priority] setting (P148).

• Image mode colors differ somewhat from those in single-image mode.

61

Installation Guide

Before setting up the projector, be sure to read “Before Installation” (P25).

62

Installation Procedure

Height

Width

4:3

Height

Width

Screen

L

H

Lower edge
of image

L: Projection distance
H: Height from center of lens to lower edge of image

16:9 / 16:10
Screen size

(diagonal)

Relationship Between Projecting Distance and Image Size

The projected image size is determined by the distance between the projector and
the screen (projection distance) as well as the zoom. Refer to the following table
and decide the distance between the projector and screen.

At a screen aspect of 16:10

Installation Guide Installation Procedure

Diagonal

100 215 135

150 323 202

200 431 269

250 538 337

300 646 404

350 754 471

400 862 538

450 969 606

500 1077 673

550 1185 740

600 1292 808

Lens unit RS-SL01ST RS-SL02LZ RS-SL04UL RS-SL05WZ

Projection ratio* 1.49 – 2.24:1 2.19 – 3.74:1 3.55 – 6.94:1 1.00 – 1.50:1

Image size

[cm]

Width Height

40 86 54

60 129 81

80 172 108

Wide

limit

1.3

(4.3)

1.9

(6.2)

2.6

(8.5)

3.2

(10.5)

4.8

(15.7)

6.4

(21.0)

8.0

(26.2)

9.6

(31.5)

11. 3

(37.1)

12.9

(42.3)

14.5

(47.6)

16.1

(52.8)

17.7

(58.1)

19.3

(63.3)

Projection distance L [m (feet)]

Tele
limit

1.9

(6.2)

2.9

(9.5)

3.9

(12.8)

4.8

(15.7)

7.2

(23.6)

9.6

(31.5)

12.1

(39.7)

14.5

(47.6)

16.9

(55.4)

19.3

(63.3)

21.7

(71.2)

24.1

(79.1)

26.6

(87.3)

29.0

(95.1)

Wide

limit

(6.2)

(9.2)

(12.5)

(15.4)

(23.3)

(31.2)

11. 9

(39.0)

14.2

(46.6)

16.6

(54.5)

19.0

(62.3)

21.4

(70.2)

23.8

(78.1)

26.1

(85.6)

28.5

(93.5)

1.9

2.8

3.8

4.7

7.1

9.5

Tel e
limit

3.2

(10.5)

4.8

(15.7)

6.4

(21.0)

8.0

(26.3)

12.1

(39.7)

16.1

(52.8)

20.2

(66.3)

24.2

(79.4)

28.3

(92.8)

32.3

(106.0)

36.4

(119.4)

40.4

(132.5)

44.5

(146.0)

48.5

(159.1)

Wide

limit

— —

4.6

(15.1)

6.1

(20.0)

7.6

(24.9)

11.4

(37.4)

15.2

(49.9)

18.9

(62.0)

22.7

(74.5)

26.4

(86.6)

30.2

(99.1)

34.0

(111.5)

37.7

(123.7)

41.5

(136.2)

45.2

(148.3)

Tele

limit

9.0

(29.5)

12.0

(39.3)

14.9

(48.9)

22.3

(73.2)

29.8

(97.8)

37.2

(122.0)

44.6

(146.3)

52.0

(170.6)

59.4

(194.9)

66.8

(219.2)

74.2

(243.4)

81.6

(267.7)

89.0

(292.0)

Wide

limit

0.9

(3.0)

1.3

(4.3)

1.7

(5.6)

2.2

(7.2)

3.2

(10.5)

4.3

(14.1)

5.4

(17.7)

6.5

(21.3)

7.5

(24.6)

8.6

(28.2)

9.7

(31.8)

10.8

(35.4)

11. 8

(38.7)

12.9

(42.3)

Tel e
limit

1.3

(4.3)

1.9

(6.2)

2.6

(8.5)

3.2

(10.5)

4.9

(16.1)

6.5

(21.3)

8.1

(26.6)

9.7

(31.8)

11. 4

(37.4)

13.0

(42.7)

14.6

(47.9)

16.3

(53.5)

17.9

(58.7)

19.5

(64.0)

Height H**

[cm]

RS-SL01ST
RS-SL02LZ
RS-SL04UL

RS-SL05WZ

-35.0 – +2.7

-52.5 – +4.0

-70.0 – +5.4

-87.5 – +6.7

-131 – +10.1

-175 – +13.5

-219 – +16.8

-263 – +20.2

-306 – +23.6

-350 – +26.9

-394 – +30.3

-438 – +33.7

-481 – +37.0

-525 – +40.4

63

Installation Procedure

Lens unit RS-SL03WF RS-SL06UW Height H** [cm]

Projection ratio* 0.80:1 0.54:1

Diagonal

Image size [cm]

Width Height

Projection distance L

[m (feet)]

RS-SL03WF RS-SL06UW

40 86 54 0.69 (2.3) 0.45 (1.5) -33.0 – -20.8 -35.0 – +13.5
60 129 81 1.04 (3.4) 0.69 (2.3) -49.5 – -31.3 -52.5 – +20.2

80 172 108 1.38 (4.5) 0.92 (3.0) -66.0 – -41.7 -70.0 – +26.9
100 215 135 1.73 (5.7) 1.16 (3.8) -82.5 – -52.1 -87.5 – +33.7
150 323 202 2.59 (8.5) 1.75 (5.7) -123 – -78.1 -131 – +50.5
200 431 269 3.45 (11.3) 2.33 (7.3) -165 – -104 -175 – +67.3
250 538 337 4.31 (14.1) 2.92 (9.6) -206 – -130 -219 – +84.1
300 646 404 5.17 (17.0) 3.51 (11.5) -248 – -156 -263 – +101

* Projection ratios are based on projection to 100-inch screens.
** Height (H) is based on [Normal] lens shift mode.

For details on the image position in [Expanded] mode, see “Adjustment Using
Lens Shift” (P72).

At a screen aspect of 16:9

Lens unit RS-SL01ST RS-SL02LZ RS-SL04UL RS-SL05WZ

Projection ratio* 1.53 – 2.30:1 2.25 – 3.84:1 3.65 – 7.13:1 1.03 – 1.54:1

Image size

Diagonal

40 89 50

60 133 75

80 177 100

100 221 125

150 332 187

200 443 249

250 553 311

300 664 374

350 775 436

400 886 498

450 996 560

500 1107 623

550 1218 685

580 1284 722

(cm)

Width Height

Wide

limit

1.3

(4.3)

2.0

(6.7)

2.6

(8.5)

3.3

(10.8)

5.0

(16.4)

6.6

(21.7)

8.3

(27.2)

9.9

(32.5)

11. 6

(38.1)

13.2

(43.3)

14.9

(48.9)

16.5

(54.1)

18.2

(59.7)

19.2

(63.0)

Projection distance L [m (feet)]

Tele
limit

2.0

(6.6)

3.0

(9.8)

4.0

(13.1)

5.0

(16.4)

7.4

(24.3)

9.9

(32.5)

12.4

(40.7)

14.9

(48.9)

17.4

(57.1)

19.9

(65.3)

22.3

(73.2)

24.8

(81.4)

27.3

(89.6)

28.8

(94.5)

Wide

limit

(6.2)

(9.5)

(12.8)

(16.1)

(24.0)

(31.8)

12.2

(40.0)

14.6

(47.9)

17.1

(56.1)

19.5

(64.0)

22.0

(72.2)

24.4

(80.1)

26.9

(88.3)

28.3

(92.8)

1.9

2.9

3.9

4.9

7.3

9.7

Tel e
limit

3.3

(10.8)

4.9

(16.1)

6.6

(21.7)

8.3

(27.2)

12.4

(40.7)

16.6

(54.5)

20.7

(67.9)

24.9

(81.7)

29.1

(95.5)

33.2

(108.9)

37.4

(122.7)

41.5

(136.2)

45.7

(149.9)

48.2

(158.1)

Wide

limit

— —

4.8

(15.7)

6.3

(20.7)

7.9

(25.9)

11.7

(38.4)

15.6

(51.2)

19.4

(63.6)

23.3

(76.4)

27.2

(89.2)

31.0

(101.7)

34.9

(114.5)

38.8

(127.3)

42.6

(139.8)

44.9

(147.3)

Tele

limit

9.3

(30.5)

12.3

(40.4)

15.4

(50.5)

23.0

(75.5)

30.6

(100.4)

38.2

(125.3)

45.8

(150.3)

53.4

(175.2)

61.0

(200.1)

68.6

(225.1)

76.3

(250.3)

83.9

(275.3)

88.4

(290.0)

Wide

limit

0.9

(3.0)

1.3

(4.3)

1.8

(5.9)

2.2

(7.2)

3.3

(10.8)

4.4

(14.4)

5.5

(18.0)

6.6

(21.7)

7.7

(25.3)

8.9

(29.2)

10.0

(32.8)

11. 1

(36.4)

12.2

(40.0)

12.8

(42.0)

Tel e
limit

1.3

(4.3)

2.0

(6.6)

2.7

(8.9)

3.3

(10.8)

5.0

(16.4)

6.7

(22.0)

8.3

(27.2)

10.0

(32.8)

11. 7

(38.4)

13.4

(44.0)

15.0

(48.2)

16.7

(54.8)

18.4

(60.4)

19.4

(63.6)

Height H**

[cm]

RS-SL01ST
RS-SL02LZ
RS-SL04UL

RS-SL05WZ

-33.2 – +5.5

-49.8 – +8.3

-66.4 – +11.1

-83.0 – +13.8

-125 – +20.8

-166 – +27.7

-208 – +34.6

-249 – +41.5

-291 – +48.4

-332 – +55.3

-374 – +62.3

-415 – +69.2

-457 – +76.1

-482 – +80.3

64

Installation Procedure

Lens unit RS-SL03WF RS-SL06UW Height H** [cm]

Projection ratio* 0.82:1 0.55:1

Diagonal

Image size [cm]

Width Height

Projection distance L

[m (feet)]

RS-SL03WF RS-SL06UW

40 89 50 0.71 (2.3) 0.48 (1.6) -31.2 – -18.7 -33.2 – +16.6

60 133 75 1.07 (3.5) 0.72 (2.4) -46.7 – -28.0 -49.8 – +24.9

80 177 100 1.42 (4.7) 0.96 (3.1) -62.3 – -37.3 -66.4 – +33.2
100 221 125 1.77 (5.8) 1.20 (3.9) -77.9 – -46.6 -83.0 – +41.5
150 332 187 2.66 (8.7) 1.79 (5.9) -117 – -69.9 -125 – +62.3
200 443 249 3.54 (11.6) 2.39 (7.8) -156 – -93.3 -166 – +83.0
250 553 311 4.43 (14.5) 2.99 (9.8) -195 – -117 -208 – +104
290 642 361 5.14 (16.9) 3.47 (11.4) -226 – -135 -241 – +120

* Projection ratios are based on projection to 100-inch screens.
** Height (H) is based on [Normal] lens shift mode.

For details on the image position in [Expanded] mode, see “Adjustment Using
Lens Shift” (P72).

At a screen aspect of 4:3

Installation Guide Installation Procedure

Lens unit RS-SL01ST RS-SL02LZ RS-SL04UL RS-SL05WZ

Projection ratio* 1.69 – 2.53:1 2.48 – 4.23:1 4.01 – 7.85:1 1.13 – 1.70:1

Image size

Diagonal

40 81 61

60 122 91

80 163 122

100 203 152

150 305 229

200 406 305

250 508 381

300 610 457

350 711 533

400 813 610

450 914 686

500 1016 762

530 1077 808

[cm]

Width Height

Wide

limit

1.4

(4.6)

2.2

(7.2)

2.9

(9.5)

3.6

(11.8)

5.5

(18.0)

7.3

(24.0)

9.1

(29.9)

10.9

(35.8)

12.7

(41.7)

14.6

(47.9)

16.4

(53.8)

18.2

(59.7)

19.3

(63.3)

Projection distance L [m (feet)]

Tele
limit

2.2

(7.2)

3.3

(10.8)

4.4

(14.4)

5.5

(18.0)

8.2

(26.9)

10.9

(35.8)

13.7

(44.9)

16.4

(53.8)

19.1

(62.7)

21.9

(71.9)

24.6

(80.7)

27.3

(89.6)

29.0

(95.1)

Wide

limit

(6.9)

(10.5)

(14.1)

(17.4)

(26.2)

10.7

(35.1)

13.4

(44.0)

16.1

(52.8)

18.8

(61.7)

21.5

(70.5)

24.2

(79.4)

26.9

(88.3)

28.5

(93.5)

2.1

3.2

4.3

5.3

8.0

Tel e
limit

3.6

(11.8)

5.5

(18.0)

7.3

(24.0)

9.1

(29.9)

13.7

(44.9)

18.3

(60.0)

22.9

(75.1)

27.4

(89.9)

32.0

(105.0)

36.6

(120.1)

41.2

(135.2)

45.8

(150.3)

48.5

(159.1)

Wide

limit

— —

5.2

(17.1)

6.9

(22.6)

8.6

(28.2)

12.9

(42.3)

17.1

(56.1)

21.4

(70.2)

25.7

(84.3)

29.9

(98.1)

34.2

(112.2)

38.4

(126.0)

42.7

(140.1)

45.2

(148.3)

Tele

limit

10.2

(33.5)

13.5

(44.3)

16.9

(55.4)

25.3

(83.0)

33.7

(110.6)

42.1

(138.1)

50.4

(165.4)

58.8

(192.9)

67.2

(220.5)

75.6

(248.0)

84.0

(275.6)

89.0

(292.0)

Wide

limit

1.0

(3.2)

1.5

(4.9)

2.0

(6.6)

2.4

(7.9)

3.7

(12.1)

4.9

(16.1)

6.1

(20.0)

7.3

(24.0)

8.5

(27.9)

9.8

(32.2)

11. 0

(36.1)

12.2

(40.0)

12.9

(42.3)

Tel e
limit

1.4

(4.6)

2.2

(7.2)

2.9

(9.5)

3.7

(12.1)

5.5

(18.0)

7.3

(24.0)

9.2

(30.2)

11. 0

(36.1)

12.9

(42.3)

14.7

(48.2)

16.6

(54.5)

18.4

(60.4)

19.5

(64.0)

Height H**

[cm]

RS-SL01ST
RS-SL02LZ
RS-SL04UL

RS-SL05WZ

-39.6 – +3.0

-59.4 – +4.6

-79.2 – +6.1

-99.1 – +7.6

-149 – +11.4

-198 – +15.2

-248 – +19.1

-297 – +22.9

-347 – +26.7

-396 – +30.5

-446 – +34.3

-495 – +38.1

-525 – +40.4

65

Installation Procedure

Lens unit RS-SL03WF RS-SL06UW Height H** [cm]

Projection ratio* 0.91:1 0.61:1

Diagonal

40 81 61 0.78 (2.6) 0.53 (1.7) -37.4 – -23.6 -39.6 – +15.2

60 122 91 1.17 (3.8) 0.79 (2.6) -56.1 – -35.4 -59.4 – +22.9

80 163 122 1.56 (5.1) 1.05 (3.4) -74.7 – -47.2 -79.2 – +30.5
100 203 152 1.95 (6.4) 1.32 (4.3) -93.4 – -59.0 -99.1 – +38.1
150 305 229 2.93 (9.6) 1.97 (6.5) -140 – -88.5 -149 – +57.2
200 406 305 3.90 (12.8) 2.63 (8.6) -187 – -118 -198 – +76.2
250 508 381 4.88 (16.0) 3.29 (10.8) -234 – -147 -248 – +95.3
260 528 396 5.07 (16.6) 3.42 (11.2) -243 – -153 -258 – +99.1

Image size [cm]

Width Height

Projection distance L

[m (feet)]

* Projection ratios are based on projection to 100-inch screens.
** Height (H) is based on [Normal] lens shift mode.

For details on the image position in [Expanded] mode, see “Adjustment Using
Lens Shift” (P72).

RS-SL03WF RS-SL06UW

66

Installation Procedure

Installing / Removing the Lens Unit

• Before installing or removing the lens unit, be sure to disconnect the
power plug or connector. Failure to do so may result in fire, electric
shock, or injury.

• When hanging the projector from a ceiling, put the projector down
on the floor or a workbench before attaching or replacing the lens
unit. Failure to do so could result in parts falling off the projector and
may cause a malfunction or personal injury.

• Do not attempt to install or remove the lens unit yourself. Be sure to
request this service from a qualified technician or contact the Canon
Customer Support Center.

• The projector is provided with a lens shift function to move the lens
up, down, left, and right using the motor. Do not touch the lens while
it is moving. Touching the lens when it is moving may result in
personal injury.

• Before replacing the lens unit, wait at least 30 minutes after the
projector is turned off to allow the lens unit to cool down. Failure to
do so may result in burns or injury.

• When installing and removing the lens unit, be sure not to touch the
surface of the lens with your hands or scratch it.

• Do not apply force to parts (e.g. lead wires) that are connected to the
lens unit or lens motor. Doing so may cause a malfunction.

• Do not replace the lens unit in a dusty location. If any dust or dirt
enters the projector, this may adversely affect picture quality.

• When carrying or holding up the projector after attaching the lens
unit, be sure not to hold the lens. Doing so may cause damage to the
lens unit.

• If transportation is necessary, the lens unit should be removed
before transporting the projector. If the projector is subjected to
excessive impacts during transportation, the lens unit may be
damaged.

• For details about which devices the projector is compatible with,
contact the Canon Customer Support Center.

Installation Guide Installation Procedure

67

Installation Procedure

Connector

Lens connector

Lens lever

Lens lever

■ Installing the Lens Unit

1 After confirming that the lens lever is raised, hold the lens unit with the

lens connector on the left side and insert it in the projector, keeping the
lens connector aligned with the connector in the projector.

Keep the lens unit level as you insert it straight into the projector. Inserting it crooked may
prevent the lens lever from moving freely or make projection blurry.

2 Turn the lens lever

clockwise to secure the
lens unit.

• When securing the lens unit, make sure it is fully inserted in the projector, and then turn
the lens lever clockwise (toward the bottom, as shown) to secure it. If it is not fully
inserted, this may prevent the lens lever from moving freely or make projection blurry.

• The projector stores certain information about lenses. This information must be set
again when lenses are replaced.
After lens replacement, lens shift reset is performed automatically when the projector is
restarted. However, when reinstalling the same type of lens, perform lens shift reset
manually (P158).

• Also refer to instructions included with the replacement lens.

68

Installation Procedure

Lens lever

Removing the Lens Unit

1 Raise the lens lever by

turning it
counterclockwise.

2 Hold the lens unit securely as you

remove it.

When removing the lens unit, keep it level
as you pull it straight out of the projector.

Installation Guide Installation Procedure

69

Installation Procedure

Screen

Optical axis

Remote control

Installation

Place the projector in front of the screen.

• To avoid keystone distortion, install the
projector so that it is at right angles to the
screen.

• The screen must not be exposed to direct
sunlight or light from lighting equipment. In
a bright room, it is recommended that
lights be turned off, curtains be drawn, and
other steps taken to make the screen
easier to see.

■ Tabletop or Floor Installation (Lower Than the Screen)

To adjust the projection position, use the lens shift function or the adjustable feet.

1 Press the LENS-SHIFT button on the remote control to display the lens

shift adjustment window.

70

Installation Procedure

When [Marginal focus]

is set to [On].

When [Marginal

focus] is set to [Off].

Press three times.

Projector

Screen

Remote control

Projector

Press the LENS button on the projector repeatedly to switch between windows
for parameters adjusted by controlling the lens.
To access the lens shift adjustment window, press the LENS button three times
(or four times if you have set [Marginal focus] to [On]).

Installation Guide Installation Procedure

2 Press the pointer buttons to adjust.

To raise or lower the image, use the [ ] / [ ] buttons on the remote control or
projector.
To move the image left or right, use the [ ] / [ ] buttons on the remote control
or projector.
To continue moving the image in a specific direction, hold down the
corresponding button.

71

Installation Procedure

90°

At maximum upward lens shift

(1)

At maximum downward lens shift

(2)

Amount movable in
up/down direction

90°

At maximum leftward lens shift At maximum rightward lens shift

(3) (3)

Amount movable in
left/right direction

Adjustment Using Lens Shift

You can reposition the image in all directions by shifting the lens up, down, left, or
right. This feature is referred to as lens shift. The projector’s lens shift range is as
follows.

90°

90°

Amount of Lens Shift for Each Replacement Lens

RS-SL01ST

RS-SL02LZ

RS-SL04UL

RS-SL05WZ

RS-SL03WF Up (1) : +11.3%

RS-SL06UW Up (1) : +75%

* Image quality may decrease in [Expanded] lens shift mode, depending on the

extent of lens shift.

Lens unit Lens shift mode: Normal Lens shift mode: Expanded*

Up (1) : +55%
Down (2) : -15%
Left/right (3) : ±10%

Up (1) : +90%

Down (2) : -11.3%
Left/right (3) : ±4.6%

Down (2) : -15%
Left/right (3) : ±30%

Down (2) : -90%
Left/right (3) : ±30%

Before using this feature, connect the projector to a computer or AV equipment (P78) and
plug the projector in (P82).

72

Installation Procedure

(1)

(2)

(3) (3)

Projected image

Area where shift is not
possible

Shift range

(3) (3)

Area where shift is not
possible

Shift range

(1)

(2)

Projected image

(1)

Shift range

Area where shift is not
possible

(2)

(3) (3)

Projected

image

Area Outside the Lens Shift Range (in [Normal] Lens Shift Mode*)

• Zoom Lenses: RS-SL01ST/RS-SL02LZ/RS-SL04UL/RS-SL05WZ

When the shift exceeds 44% in the upward direction, the amount of available shift
in the left/right directions decreases. When the lens is shifted upward to the
maximum of 55% (1), the lens cannot be shifted left or right.

• Short Fixed Lens: RS-SL03WF
The more you shift the lens up or down, the less you can shift it left or right. When
the lens is shifted upward or downward to the maximum of 11.3%, the lens cannot
be shifted left or right.

Installation Guide Installation Procedure

• Ultra-wide Zoom Lens: RS-SL06UW
The more you shift the lens up or down, the less you can shift it left or right. When
the lens is shifted upward to the maximum of 75%, the lens cannot be shifted left or
right.

In [Expanded] lens shift mode, the lens can be shifted to each corner position, however
image quality may decrease.

73

Installation Procedure

Press twice.

Remote control

Resetting the Position

During screen position adjustment, press
and hold the LENS-SHIFT button on the
remote control or the LENS button on the
projector to display the [Lens shift reset]
window. The selections for the lens
currently used are displayed. Use the
pointer buttons to select one of them, then
press the OK button.

Lens unit type Available items

RS-SL01ST

RS-SL02LZ

RS-SL04UL

RS-SL05WZ

RS-SL03WF

RS-SL06UW

• After resetting, the lens may be slightly misaligned from your selected position.

• For precise positioning, use the lens shift function to fine-tune the position.

50%: Up 50%, left/right 0%
0%: Up/down/left/right 0%

0%: Up/down/left/right 0%

Adjusting Peripheral Focus

This feature enables focus adjustment around the edges of the screen.

• Use marginal focus adjustment for curved screens, such as domes.

• Use marginal focus adjustment to bring images on flat screens into focus if image

edges remain warped after you adjust the overall focus.

■ Bringing Image Edges into Focus

To adjust peripheral focus, press the FOCUS button on the remote control or the
LENS button on the projector.

1 Press the FOCUS button on the remote control twice to display the

marginal focus adjustment window.

• The marginal focus feature is not available depending on the type of lens installed.

• [Marginal focus] must be set to [On] in advance (P155).

74

Installation Procedure

When [Marginal focus]

is set to [On].

When [Marginal

focus] is set to [Off].

Press twice.

Projector

Press the [ ] / [ ] / [ ] / [ ] buttons to adjust peripheral focus.

Remote control

Projector

Pressing the LENS button on the projector repeatedly switches between
windows for lens-related parameters.
Press the LENS button twice to display the marginal focus adjustment window.

Installation Guide Installation Procedure

2 Press the pointer buttons to adjust the focus at image edges.

75

Installation Procedure

Adjustable feet

The focus at the center of the screen may become blurred when the indicator is
moved to nearly to the top or bottom edge in the [Marginal focus adjust.]
window. If this happens, perform steps (1) to (3) below repeatedly to adjust the
focus of the entire screen.

(1) Use [Focus adjustment] (P48) to adjust the focus at the center of the

screen.

(2) Use [Marginal focus adjust.] to adjust the focus at the edges of the

screen.

(3) Check the focus at the center of the screen.

When using the lens shift adjustment function, the optical axis may be shifted further from
the center of the screen than when the function is not used. This can be adjusted by
performing steps (1) to (3) repeatedly.

3 Once image edges are in focus, press the OK or FOCUS button.

■ Resetting Adjustment

Clears the values set in marginal focus adjustment and returns the lens marginal
focus to the standard position.
In the [Install settings] menu, select [Professional settings] > [Marginal focus] >
[Reset] to reset the adjustment.

After the above window disappears, the values set in [Marginal focus] are cleared
and the lens marginal focus is returned to the standard position. A reset can be
applied regardless of whether [Marginal focus] is set to [On] or [Off].

Setting [Marginal focus] to [Off] will not reset the setting value for marginal focus. Select
[Off] to preserve the setting value and prevent further adjustment.

Adjustment Using the Adjustable Feet

Adjustment in a range of ±1.8° is possible using
the adjustable feet.

76

Installation Procedure

Ceiling mounting Rear projectionInstallation on high surfaces

■ High Installation, Ceiling Mounting, and Rear Projection

Projector features enable projection from a shelf or other high surface. You can also
mount the projector on the ceiling (ceiling mounting) with it turned upside down or
place it behind the screen (rear projection) if you use a translucent screen.
In [Image flip H/V] (P150) in the menu, choose a method of projection that
corresponds to how the projector is installed.

1 Press the MENU button on the remote control or projector, and then

select [Install settings] > [Image flip H/V].

Installation Guide Installation Procedure

2 Select the orientation of how the projector is installed.

Option Function

None Select for normal projection, without inversion.

Select when the projector is installed upside-down on the ceiling.

Ceiling mounted

Rear

Rear, Ceiling mounted

When setting the projector on a high surface for projection, be sure
the surface is flat and stable. Failure to do so poses a risk of the
projector falling and causing accidents or injury.

Ceiling mounting requires an optional ceiling attachment (part no.: RS-CL15) and
ceiling-mount arm (part no.: RS-CL17). Depending on the installation environment,
an extension pipe (part no.: RS-CL08 or RS-CL09) may also be required. Contact
the Canon Customer Support Center for more detailed information.

• Make sure to use the optional ceiling attachment.

• You should never install the ceiling attachment by yourself.

The projected image is inverted in both vertical and horizontal
directions.

Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.

Select this to project an image from behind the screen with the
projector hung from the ceiling.
The projected image is inverted in the vertical direction.

77

Connection Procedure

HDMI cable (not included)

HDMI terminal

AV

equipment

Computer

Connecting Other Equipment

Before connecting the projector to other equipment, turn off both the projector
and the other equipment.

■ HDMI Connections

78

Connection Procedure

DVI-D-sub 15

conversion cable

DVI-I cable
(not included)

Monitor output

terminal

(Mini D-sub 15-pin)

Monitor output

terminal

(DVI terminal)

Computer

DisplayPort cable
(not included)

AV

equipment

DisplayPort port

Computer

■ DVI-I Connections

Installation Guide Connection Procedure

■ DisplayPort Connections

79

Connection Procedure

RCA plug
component
conversion
cable (not
included)

BNC cable (not
included) or Mini
D-sub 15-pin ­BNC terminal
converter cable
(not included)

Computer cable
(not included)

D terminal plug
(not included)

RCA plug
(not included)

Monitor output terminal

(Mini D-sub 15-pin)

D terminal

RCA

component

terminal

Computer

RCA plug
component
conversion
cable (not
included)

AV

equipment

■ Analog PC-2 / COMPONENT Connections

80

Connection Procedure

LAN cable
(CAT5e or better; shielded;
not included)

HDBaseT
transmitter

HDMI cable
(not included)

HDMI terminal

AV

equipment

Computer

Audio cable
(not included)

Audio cable
(not included)

RCA terminal Mini jack

Audio output
terminal

Amplified

speakers

AV

equipment

Computer

■ LAN / HDBaseT Connections

Installation Guide Connection Procedure

■ Audio Input/Output Connections

81

Connection Procedure

■ Plugging the Projector In

Connect the power cord to the projector and plug it in.

Insert the power plug and connector securely up to the base.

• Unplug the power cord if the projector will not be used for a long period of time.

• [Date and time settings] may be reset if the power cord is left unplugged for a long
period of time (P175).

82

Connection Procedure

LAN cable (shielded; not included)Hub or router, etc. LAN / HDBaseT

port

LAN / HDBaseT

port

HDBaseT

transmitter

LAN cable (CAT5e

or better; shielded;

not included)

LAN cable (CAT5e
or better; shielded;

not included)

Connecting to a Network

■ Network Connection Overview

Connecting the projector to a network enables you to control the projector from a
computer and receive notification of projector errors via email.
Depending on the method of network connection, preparation on the computer side

may be necessary.

■ Connection Methods

The projector can be connected to a wired network with a LAN cable or to a
wireless network via Wi-Fi.

Wired Networks

Use a LAN cable to connect the projector and computer to the network. Connect
the LAN cable to the projector’s LAN / HDBaseT port to enable communication.

Installation Guide Connection Procedure

83

Connection Procedure

Wireless LAN-compatible

computers

Projector (in PJ AP mode)

Wireless

LAN-compatible

computers

Computers

connected to the

network via LAN

cable

Access point

Projector

(in infrastructure mode)

Wireless Networks

• Projector Access Point (PJ AP) Mode

The projector can be used as an access point for direct communication with
wireless LAN-compatible computers.
Up to five computers can be connected at once.

The following network features are available in PJ AP mode.

• Web features

• NMPJ features (networked screen projection)

• User commands

• SNMP features
Other network features (PJLink, Mail, AMX Device Discovery and Crestron RoomView) are not
available.

• Infrastructure Mode

The projector can also be used as a wireless LAN client for connections to a
wireless LAN access point.
In this case, the projector is connected to computers via the wireless LAN access
point.

84

Connection Procedure

Network connection

• The following network features are available in infrastructure mode.

- Web features

- Mail features

- NMPJ features (networked screen projection)

- User commands

- SNMP features

Other network features (PJLink, AMX Device Discovery and Crestron
RoomView) are not available.

• The following restrictions apply in infrastructure mode.

- Access point SSIDs not in ASCII code (single-byte letters, numbers, or

symbols) may cause character corruption in search result display.

- Connectivity cannot be assured if access point SSIDs include characters not in
ASCII code (single-byte letters, numbers, or symbols).

When multiple access points have the same SSID, only search results for the
access point with the strongest signal are shown.

• Remember to set your preferred network (wired or wireless) to [On] if [Network
(wired/wireless)] on the projector is set to [Off/Off] and the network connection is
disabled (P184). For wireless networks, choose the type of connection.

• The LAN / HDBaseT port provides a maximum transfer rate of 100 Mbps.

• Referring to “Checking Projector Information” (P197), confirm that the projector’s

IP address is not the same as that of other computers on the network. To set a
projector IP address, follow the instructions in “Basic Wired Network Settings
[Wired]” (P204) or “Basic Wireless Network Settings [Wireless]” (P206) and use
the web screen, or use the projector’s “Detailed settings (wired)” (P185) or
“Detailed settings (wireless)” (P189).

• In a network environment where a DHCP server is operating, select [On] in
[DHCP] on the projector to enable the DHCP function and connect it (P185,

P191).

Installation Guide Connection Procedure

• Wired LAN features and infrastructure mode cannot be used at the same time.

• PJ AP and infrastructure modes cannot be used at the same time.

• Wired LAN and PJ AP mode cannot be used in the same subnetwork.

• When you connect the computer to the network for the first time, it is also necessary to
perform settings on the computer. In this case, consult the network administrator
regarding the necessary settings.

85

Connection Procedure

■ Configuring the Computer’s Network Settings

Instructions for setting a computer’s IP address (for wired connections or wireless
connections) are as follows for each operating system.

Windows 10

1 Click the Start button (Windows logo) in the lower left of the screen.
2 From [Windows system tools] on the Start menu that is displayed, click

[Control Panel].

• On some versions of Windows 10, you must first click [All Apps] in order to

display [Windows system tools].

3 Click [View network status and tasks].

• In icon view:

Click [Network and Sharing Center].

4 Click [Change adapter settings].
5 For a wired connection, right-click [Ethernet], or for a wireless

connection, right-click [Wi-Fi]. Next, click [Properties].

6 In the [This connection uses the following items] list, select [Internet

Protocol Version 4 (TCP/IPv4)] and click the [Properties] button. Make a
note of the original network settings (IP address, subnet mask, default
gateway, etc).

7 Select [Use the following IP address] and set the IP address and subnet

mask.

The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.

8 When the settings are completed, click the [OK] button, and then click the

[Close] button in the [Ethernet Properties] window to close it.

86

Connection Procedure

Windows 8.1

1 Click the down arrow in the lower left of the start screen.
2 Click [Control Panel].

• From the desktop screen:

Press Win+X.
In the shortcut menu displayed in the lower left, click [Control Panel].

3 Click [View network status and tasks].

• In icon view:

Click [Network and Sharing Center].

4 Click [Change adapter settings].
5 For a wired connection, right-click [Ethernet], or for a wireless

connection, right-click [Wi-Fi]. Next, click [Properties].

6 Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]

button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).

7 Select [Use the following IP address] and set the IP address and subnet

mask.

The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.

Installation Guide Connection Procedure

8 When the settings are completed, click the [OK] button, and then click the

[Close] button in the [Local Area Connection Properties] window to close
it.

87

Connection Procedure

Windows 7

1 From the PC [Start] menu, select [Control Panel].
2 Click [Network and Internet], and then click [View network status and

tasks].

3 From the menu on the left side of the window, click [Change adapter

settings].

4 For a wired connection, right-click [Local Area Connection], or for a

wireless connection, right-click [Wireless Network Connection]. Next,
click [Properties].

5 Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]

button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).

6 Select [Use the following IP address] and set the IP address and subnet

mask.

The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.

7 When the settings are completed, click the [OK] button, and then click the

[Close] button in the [Local Area Connection Properties] window to close
it.

Mac OS X

1 Open the Apple Menu and select [System Preferences].
2 In the System Preferences window, click [Network] to display the Network

window.

3 For a wired connection, select [Built-in Ethernet], or for a wireless

connection, select [Wi-Fi]. Next, select [Detail].

4 Click the [TCP/IP] tab. Make a note of the original network settings (IP

address, subnet mask, router, DNS server, and so on).

5 Create a new network environment and set the IP address and subnet

mask.

The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.

6 Click [OK], then select [Apply] to close the network preference window.

Resetting the IP Address Setting of the Computer

Follow the same procedure as for changing the IP address and reset the values to
the original values based on the notes taken before the change.

88

Connection Procedure

■ Setting Up the Network

Displaying the Network Configuration Screen

1 Turn on the computer and projector.

Network functions are not available until about 40 seconds after the projector is plugged
in.

2 Launch a web browser, enter “http://(projector IP address)” in the

address bar, and press the Enter key.

The projector web screen appears.

The following information is displayed.

Installation Guide Connection Procedure

Projector control Displays the projector control screen.

Settings Shows the settings screen.

Projector name The name of the projector on the network

Comment Relevant notes, such as where the projector is installed

MAC address (Wired) MAC address of the wired LAN

IP address (Wired) IP address of the wired LAN (IPv4)

MAC address (Wireless) MAC address of the wireless LAN

IP address (Wireless) IP address of the wireless LAN (IPv4)

PowerStatus The power status of the projector

Filter time Air filter operating time

Alert Error message (if an error has occurred)

Temperature abnormality
Light source abnormality
Faulty air filter unit
Faulty cooling fan
Faulty power supply
Faulty lens

The factory default IP address is “192.168.254.254” for wired connections (IPv4) and
“192.168.253.254” for wireless connections (IPv4). If DHCP settings are used, ask the
network administrator for the projector IP address. It is possible to check the IP address
from the projector menu (P185).

89

Connection Procedure

3 Click [Settings] on the web screen.

The password input window appears.

4 Enter the user name and password on the password input window, then

click [OK].

The factory default user name is “root” and the password is “system”.
The settings screen is displayed. Complete the network settings on this screen.

For details on the projector’s web screen, see “Projector Web Screen Menu”
(P198).

To control the projector from the computer, click [Projector control] (P97).

90

Connection Procedure

(1)

(2)

Network Setting

1 Select a function to set up from the settings screen menu.

2 Enter setting details in the fields shown (1), and then click [OK] (2).

Installation Guide Connection Procedure

91

Connection Procedure

3 A confirmation window appears. Check the contents and if they are

correct, click [Apply].

The settings are applied to the projector.
Selecting [Wired], [Wireless] or [Password] in the menu will cause this
message to be displayed: “Save completed. Please change setting and
reconnect.”
If you select functions other than above, “Save completed” is displayed. Click
[Back to top] to return to the top page of the web screen.

92

Connection Procedure

Setting Errors

When a setting-related error occurs, the error name is displayed on the screen, and
a “ ” mark is displayed next to the input field which caused the error.

The error meanings are as shown below.

Error Meaning

Input error A setting outside the valid range was set on the

settings screen.

Password setting error The set password and confirmation password did

not match.

Invalid SMTP The SMTP server IP address has not been set.

System failed to connect SMTP server. Failed to connect to the SMTP server attempting

to send a test mail.

System failed to connect POP3 server. Failed to connect to the POP3 server attempting

to send a test mail.

System doesn’t support this auth type. An authentication type was set which is not

supported by the server.

System failed to authenticate. Authentication failed attempting to send a test

mail.

The system failed to send the test mail. Sending of test mail failed due to a connection

failure with the SMTP server or an error which
does not ordinarily occur.

Wired network is down Wired networking is disabled.

At the time of Monday, it is already set.* Failed to set the schedule, because operation is

already scheduled for the specified time and day.

Cannot make network settings because
IPsec setting is ON.

Cannot make IPsec settings because
DHCP setting is ON.

It is not possible to make network settings
because IPsec is set to [ON].

It is not possible to make IPsec settings because
DHCP is set to [ON].

Installation Guide Connection Procedure

* Messages vary depending on the day.

93

Connection Procedure

Resetting Network Settings to the Default Settings

1 Perform steps 1 – 3 on “Setting Up the Network” (P89) to display the

settings screen.

2 Click [Initialize network settings].

3 A confirmation window appears. Click [OK].

94

Connection Procedure

■ Error Notification Mails

The messages shown in the following error list are sent when an error occurs in the
projector.

Error list

Errors related
to temperature

Errors related
to the light
source

Errors related
to the air filter

Errors related
to the fan

Error name Temperature abnormality

Text The temperature inside the projector is too high

for some reason or the outside air temperature is
higher than the operating range. If the problem is
inside the projector, check whether the projector
is installed and operating normally, unplug the
projector from the power outlet to cool down the
projector interior and then restart projection. If
the air intake or exhaust vent is blocked, remove
the obstacle. If the air filter is clogged, replace it.
If the same warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.

Error name Light source abnormality

Text The light source does not illuminate. Restart the

projector and check projection. If the light source
does not illuminate after this, the light source
drive circuit may be damaged. Contact the
Canon Customer Support Center.

Error name Faulty air filter unit

Text The air filter is not installed correctly. Install the

air filter correctly and restart the projector. If the
same warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.

Error name Faulty cooling fan

Text There may be a malfunction in the cooling fan or

another component. Unplug the projector from
the power outlet, then plug it back into the outlet
and turn on the projector again. If the same
warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.

Installation Guide Connection Procedure

95

Connection Procedure

Errors related
to the power

Errors related
to the lens

Error name Faulty power supply

Text Abnormal voltage is applied to some parts in the

power supply or another failure may have
occurred. Unplug the projector from the power
outlet, then plug it back into the outlet and turn on
the projector again. If the same warning occurs
again, there may be a malfunction in the
projector. Unplug the projector from the power
outlet. Contact the Canon Customer Support
Center.

Error name Faulty lens

Text The lens unit is not installed correctly. Unplug the

projector, install the lens unit correctly, and then
plug the projector in again. If the same warning
occurs again, there may be a malfunction in the
projector. Contact the Canon Customer Support
Center.

96

Connection Procedure

Controlling the Projector from a Computer

The projector can be controlled from a computer over a wired or wireless network
connection.

1 Turn on the computer and projector.
2 Launch a web browser, enter “http://(projector IP address)” in the

address bar, and press the Enter key.

The projector web screen appears.

The factory default IP address is “192.168.254.254” for wired connections and
“192.168.253.254” for wireless connections. If DHCP settings are used, ask the network
administrator for the projector IP address. It is possible to check the IP address from the
projector menu (P185).

3 Click [Projector control] on the web screen.

The password input window appears.

4 Enter the user name and password on the password input window, then

click [OK].

The factory default user name is “root” and the password is “system”.
The projector control screen appears.

Installation Guide Connection Procedure

The projector can be controlled from this screen.

97

Connection Procedure

Item Explanation

Projector name The name of the connected projector is displayed (P212).

Comment Shows notes, such as where the projector is installed (P212).

Refresh Refreshes the displayed contents with the most recent information.

Power Turns projector power on or off.

Input Select an input signal and click [Apply] to change to that input signal

(P47).

Aspect Select an aspect and click [Apply] to change to that aspect (P102).

Image mode Select an image mode and click [Apply] to change to that image mode

(P49).

Blank Switches the blank setting on or off (P52).

Mute Switches the mute setting on or off (P54).

Auto PC Click [Apply] to perform Auto PC adjustment (P131).

Split screen Select the setting for split-screen mode and click [Apply] to switch split-

screen display on or off.

Split screen
control

Information The control results and control error information are displayed at the

Select the control rights setting for split-screen mode and click [Apply]
to switch the side currently under control.

top of the screen.

5 When the operations are finished, click [Back to top] to return the initial

web screen.

98

Adjusting the Image

Filling the Screen

Select an optimum screen aspect or an optimum projection aspect according to the
aspect ratio of the screen, type of input image signal and so on for the projection to
make best use of the screen size.
Specify the screen aspect and projection aspect, referring to the following table.

When projecting at the original aspect ratio on a 16:10 screen

Original Aspect

Ratio

(16:10)

1920 x 1200

1440 x 900
1280 x 800

(16:9)

1920 x 1080

1280 x 720

(4:3)
1600 x 1200
1400 x 1050

640 x 480

Screen aspect

setting (P101)

[16:10]

Aspect setting

(P102)

[16:10]

[Auto]

[16:9]

[Auto]

[4:3]

[Auto]

Screen image

When projecting at the original aspect ratio on a 16:9 screen

Original Aspect

Ratio

(16:10)

1920 x 1200

1440 x 900
1280 x 800

Screen aspect

setting (P101)

Aspect setting

(P102)

[Auto]

Screen image

Installation Guide Adjusting the Image

(16:9)

1920 x 1080

1280 x 720

(4:3)
1600 x 1200
1400 x 1050

640 x 480

[16:9]

[16:9 D. image shift]

[16:9]

[Auto]

[4:3]

[Auto]

99

Adjusting the Image

When projecting at the original aspect ratio on a 4:3 screen

Original Aspect

Ratio

(16:10)

1920 x 1200

1440 x 900
1280 x 800

(16:9)

1920 x 1080

1280 x 720

(4:3)
1600 x 1200
1400 x 1050

640 x 480

Screen aspect

setting (P101)

[4:3]

[4:3 D. image shift]

When projecting to fill a 16:10 screen

Original Aspect

Ratio

(16:10)

1920 x 1200

1440 x 900
1280 x 800

Screen aspect

setting (P101)

Aspect setting

(P102)

[16:10]

[Auto]

[16:9]

[Auto]

[4:3]

[Auto]

Aspect setting

(P102)

[16:10]

[Auto]

Screen image

Screen image

(16:9)

1920 x 1080

1280 x 720

(4:3)
1600 x 1200
1400 x 1050

640 x 480

[16:10]

When projecting to fill a 16:9 screen

Original Aspect

Ratio

(16:10)

1920 x 1200

1440 x 900
1280 x 800

(16:9)

1920 x 1080

1280 x 720

(4:3)
1600 x 1200
1400 x 1050

640 x 480

Screen aspect

setting (P101)

[16:9]

[16:9 D. image shift]

[16:10]

[16:10]

Aspect setting

(P102)

[16:9]

[16:9]

[Auto]

[16:9]

Screen image

100