Canon K30316 User Manual

K30316
6-Mar.-2009 Ver.2.1US
Confidential
Wireless LAN Module
Product No. : K30316
Users Manual
1/16
6-Mar.-2009 Ver.2.1US
Confidential
K30316
Document constituent list
Control name Control No. Document Page General Items HD-AG-A****** 1/1 Absolute maximum ratings HD-AM-A****** 1/1 Electrical characteristics HD-AE-A****** 1/2-2/2 Circuit schematic HD-MC-A****** 1/1 Outline / A pp earan ce HD-AD-A****** 1/1 Outline / A pp earan ce HD-AD-B****** 1/2-2/2 Mounting Location of Module ******** 1/2-2/2
Rev. record
27-Jan.-2009> Ver.1. 0 18-Feb.-2009> Ver.2. 0 6-Mar.-20 09> Ver.2.1
2/16
K30316
6-Mar.-2009 Ver.2.1US
Confidential
Control No. HD-AG-A****** (1/1)
Scope This specification (“Specification”) applies to the hybrid IC “K30316” for use Wireless LAN module (“Product”).
1. Product No. : K30316
2. Function: Radio frequency transfer Module. (IEEE802.11bg standard conformity)
3. Application: Printer
4. Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes
Containment of hazardrous substance in this Product *This product conforms to RoHS Directive (2002/95/EC).
5. Outline: 6-pin Connector
6. Marking: Type, MAC address, Lot number
7. Features:
-IEEE802.11b/g standard conformity
Transmit speed: 11g (54/48/36/24/18/12/9/6Mbps)
11b (11/5.5/2/1 Mbps) Modulation: 11g (OFDM): BPSK, QPSK, 16QAM, 64QAM 11b (DSSS): BPSK, QPSK, CCK
Channel Number: 1 to 11 channels Interface: USB Embedded ARM MPU for reducing loads on host processor Built-in EEPROM (8kbit), OSC (40MHz), Chip Antenna (Monopole antenna), Connector
8. Security: WEP (64/128bit), TKIP (WPA), AES (WPA2)
9. Packing:
Packaging method: Trey
10. Notes:
a. Any question arising from this Specification shall be solved through mutual discussion by the parties
hereof.
b. This Product is not designed for radiation durable and should not be used under the circumstance of
radiation.
c. The operating conditions of this Product are as shown in this Specification.
This Product mentioned in this Specification is manufactured for use in Printer.
d.
This Product shall not be used in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added at design stage, all at the customer’s sole risk.
e. Communication between this Product and others might not be established nor maintained depending
upon radio environment or operating conditions of this Product and other ISM band at 2.4GHz products.
f. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the
other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices.
Control name General Items
3/16
K30316
6-Mar.-2009 Ver.2.1US
Confidential
Control No. HD-AM-A****** (1/1)
Absolute maximum ratings
Item Symbol
Vbus -0.3 6.0
Supply voltage
PE -0.3
Storage temperature range Tstg -40 100 Degrees C Operation temperature
range
Recommendation operating range
Item Symbol
Topr -5 25 55 Degrees C
Vbus 3.4 3.6 4.0
Control name Absolute maximu m ratings
Rating
Min. Typ. Max. Unit
Vbus
+0.3
Rating
Min. Typ. Max. Unit
V
Remark
Remark
Supply voltage
PE (SL) - - 0.2 PE (SH) 1.1 - Vbus
V
Note:
1. Operation temperature range is set to satisfy products electrical characteristics for a short
period of time.
Refer reliability condition to check the product life cycle if you use this module for a long period of time in the condition other than the Typ. standard.
4/16
K30316
6-Mar.-2009 Ver.2.1US
Confidential
Control No. HD-AE-A****** (1/2)
Control name Electrical characteristics
DC Specifications
The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage
No. Parameter Condition Symbol Min. Typ. Max. Unit Remark
1 Operating Voltage 1
2 Operating Voltage 2 Power Enable *1
3 Peak Current1 Ip1 - - 370 mA 3 Power consumption1 4 Power consumption2 Burst Tx (11g/54Mbps) Pc2 - 663 701 mW Duty 10.8% 5 Power consumption3 Burst Rx (11g/54Mbps) Pc3 - 705 723 mW 6 Power consumption4 Burst Tx (11b/11Mbps) Pc4 - 713 802 mW Duty57.3 % 7 Power consumption5 Burst Rx (11b/11Mbps) Pc5 - 618 635 mW
Continuous (11g/6Mbps)
Vbus PE(SL) PE(SH) PEI SL
T1 T2
Pc1 - 943 1080 mW
- 3.6 - V
- - 0.2
1.1 - Vbus
-50 - - uA 500 - ­500 - -
V
ms
*1) Power Enable pin connected to the Vbus pin and pulled up with 100kohm inside of the module.
5/16
Loading...
+ 11 hidden pages