• Make sure you read this guide before using the camera.
• Store this guide safely so that you can use it in the future.
ENGLISH
Checking the Package Contents
COPY
Check if the following items are included in your camera package. If anything
is missing, contact the retailer from which you purchased the camera.
Camera
Interface Cable
IFC-400PCU
Getting Started
Using the PDF Manuals
Also refer to the PDF manuals on the CD-ROM. After installation,
shortcut icons appear on the desktop. If the software installation fails,
you can find the manuals in the Readme folder on the CD-ROM.
• Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many features to shoot
more challenging photos.
• Personal Printing Guide
Read when you want to connect the camera to a printer
(sold separately) and print.
• Software Guide
Read when you want to use the included software.
• A memory card is not included.
• Adobe Reader is required to view the PDF manuals.
AA Alkaline Batteries (x2)
DIGITAL CAMERA
Solution Disk
Warranty
Wrist Strap WS-800
AV Cable
AVC-DC300
Card
“Canon Customer
Support” Leaflet
2
Read This First
COPY
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
• The LCD monitor is produced with extremely high-precision
manufacturing techniques. More than 99.99% of the pixels operate to
specification, but occasionally non-performing pixels may appear as bright
or dark dots. This is not a malfunction and has no effect on the recorded
image.
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
COPY
Shoot
Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 22
Shoot to match special conditions . . . . . . . . . . . . . . . . . . . 50 – 52
Understand what is displayed on the screen. . . . . . . . . . . . . . 118
5
Table of Contents
COPY
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents ...... 2
Read This First ................................. 3
Index ............................................. 128
7
Conventions Used in This Guide
COPY
• Icons are used in the text to represent the camera buttons and switches.
• Language that displays on the screen appears inside [ ] (square
brackets).
• The directional buttons and FUNC./SET button are represented by the
following icons.
(Up button)
(FUNC./SET button)
(Right button)
(Left button)
(Down button)
•: Things you should be careful about.
•: Troubleshooting tips.
•: Hints for getting more out of your camera.
•: Supplemental information.
• (p. xx): Reference pages.“xx” stands for a page number.
• This guide assumes all functions are at their default settings.
• The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
• Functions that differ depending on the camera model are indicated with
the following icons:
: Functions and precautions for the PowerShot A495 only
: Functions and precautions for the PowerShot A490 only
Explanations without these icons apply to both models.
• PowerShot A495 screenshots and illustrations are used for the
explanations in this guide.
8
Safety Precautions
COPY
• Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
•
Be sure to also check the guides included with any separately sold accessories you use.
Warning
Caution
Caution
Denotes the possibility of serious injury or death.
Denotes the possibility of injury.
Denotes the possibility of damage to the equipment.
Warning
Camera
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if swallowed. If this occurs, contact a doctor
immediately.
• Do not attemptto disassemble or alter any part of the equipment unless
expressly indicated to do so in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not allow liquids or foreign objects to enter the camera.
The above could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn the
camera power off and remove the batteries.
• Use only recommended power sources.
Using other power sources could result in fire or electrical shock.
9
Safety Precautions
COPY
Batteries
• Use only recommended batteries.
• Do not place the batteries near or in direct flame.
• Do not let the batteries come into contact with water (e.g. sea water) or other
liquids.
• Do not attempt to disassemble, alter or apply heat to the batteries.
• Avoid dropping or subjecting the batteries to severe impacts.
The above may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical assistance.
Other Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could damage the camera or lead to injury.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the batteries, resulting in
electrical shock, fire, burns or other injuries. High temperatures may also cause
deformation of the casing.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
10
Safety Precautions
COPY
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
This may cause the camera to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the screen.
11
12
COPY
1
COPY
Getting Started
This chapter explains preparations before shooting, how to shoot in
» mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to shoot and view movies and
transfer images to a computer.
Attaching the Strap/Holding the Camera
• Be sure to attach the supplied strap to the camera and wrap it around your
wrist when shooting to avoid dropping the camera.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
Strap
13
Compatible Memory Cards (Sold
COPY
Separately)
• SD memory cards (2 GB and less)*
• SDHC memory cards (More than 2 GB, up to and including 32 GB)*
• SDXC memory cards (More than 32 GB)*
• MultiMediaCards
• MMCplus memory cards
• HC MMCplus memory cards
* This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may
not be recognized when using a commercially available card reader.
Check to make sure that your OS supports this function beforehand.
Inserting the Batteries and Memory Card
Insert the included batteries and a memory card (sold separately).
Check the card’s write-protect
1
tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab up
until you hear a click.
Open the cover.
2
● Slide the cover and open it .
14
Insert the batteries.
3
● Insert the batteries with (+) and (-) ends
oriented correctly.
Inserting the Batteries and Memory Card
COPY
Insert the memory card.
4
● Insert the memory card as shown until it
locks into place with a click.
● Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Label
Close the cover.
5
● Close the cover and press downward as
you slide it until it clicks into place .
● Removing the Memory Card
● Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards have a write-protect tab. If this tab
is in the locked position, [Memory card locked] will appear on the screen
and you will not be able to take or erase images.
Approximate Number of Shots That Can Be Taken
Power Source
Number of Shots*150400
Playback Time (Hours)810
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
15
Inserting the Batteries and Memory Card
COPY
Compatible Batteries
AA alkaline batteries and Canon AA NiMH batteries (sold separately)
(pp. 36, 37).
Can any other batteries be used?
We cannot recommend the use of any other batteries than those listed
above because performance varies widely.
Why use NiMH batteries?
NiMH batteries last much longer than alkaline batteries, especially in cold
weather.
Battery Charge Indicator
When battery charge is low, an icon and message will appear on the screen.
If the batteries are charged, the icon and message will not appear.
DisplaySummary
Nearly depleted. Ready new batteries.
“Change the batteries”Depleted. Change the batteries.
Approximate Number of Shots per Memory Card
Memory Card
Number of Shots
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is
in a Shooting mode (p. 22).
Number of shots that can be taken
4GB16GB
14716026
16
Setting the Date and Time
COPY
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
1
● Press the power button.
X The Date/Time screen will appear.
Set the date and time.
2
● Press the qr buttons to choose an option.
● Press the op buttons to set a value.
Complete the setting.
3
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the
Date/Time screen will appear each time you turn on the camera.
● Press the m button.
X Once the date and time have been set, the
Date/Time screen will close.
● Pressing the power button will turn off the
camera.
17
Setting the Date and Time
COPY
● Changing the Date and Time
You can change the current date and time settings.
Display the menus.
1
● Press the n button.
Choose [Date/Time] in the 3 tab.
2
● Press the qr buttons to choose the 3 tab.
● Press the op buttons to choose [Date/
Time], then press the m button.
Change the date and time.
3
● Follow Steps 2 and 3 on p. 17 to adjust the
setting.
Date/Time battery
If the [Date/Time] screen appears even when the date/time have been
correctly set, insert a new date/time battery (p. 110).
● Pressing the n button will close the
menu.
18
Setting the Display Language
COPY
You can change the language that displays on the screen.
Enter Playback mode.
1
● Press the 1 button.
Display the settings screen.
2
● Press and hold the m button, then press
the n button.
Set the display language.
3
● Press the opqr buttons to choose a
language, then press the m button.
X Once the display language has been set,
the settings screen will close.
You can also change the display language by pressing the n button,
choosing the 3 tab, and choosing the [Language] menu item.
19
Formatting Memory Cards
COPY
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera.
Formatting (initializing) a memory card erases all data on the memory card.
As you cannot retrieve the erased data, exercise adequate caution before
formatting the memory card.
Display the menu.
1
● Press the n button.
Choose [Format].
2
● Press the qr buttons to choose the 3 tab.
● Press the op buttons to choose [Format],
then press the m button.
Format the memory card.
3
● Press the qr buttons to choose [OK], then
press the m button.
X A confirmation screen will appear.
● Press the op buttons to choose [OK] and
press the m button.
X The memory card will be formatted.
20
Pressing the Shutter Button
COPY
X When formatting ends, [Memory card
formatting complete] will appear on the
screen.
● Press the m button.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
Pressing the Shutter Button
To take images that are in focus, be sure to first press the shutter button
lightly (halfway) to focus, then press fully to shoot.
Press halfway (lightly to focus).
1
● Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
Press fully (all the way to shoot).
2
X The camera plays the shutter sound and
takes the shot.
If you shoot without pressing the shutter button halfway, the image may
not be in focus.
21
Taking Pictures (Smart Auto)
COPY
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Turn on the camera.
1
● Press the power button.
X The start-up screen will appear.
Choose » mode.
2
● Press the button, then press the qr
buttons to choose ».
● Press the m button.
● When you point the camera toward the
subject, the camera will make a slight noise
as it determines the scene.
X The icon for the determined scene will
appear in the upper right of the screen.
X The camera will focus on detected faces
and display frames on them.
Compose the shot.
3
Zoom bar
● Pressing the zoom button toward i will
zoom in on your subject, making it appear
larger. Pressing the button toward j will
zoom out from your subject, making it
appear smaller (the zoom bar will appear).
22
Focus.
4
● Press the shutter button halfway to focus.
Taking Pictures (Smart Auto)
COPY
X When the camera focuses, it will beep twice
and AF frames will appear where the
camera focuses.
Several AF frames will appear when the
camera focuses on more than one point.
AF Frame
Shoot.
5
● Press the shutter button fully.
X The camera will play the shutter sound and
shoot. The flash will automatically fire in low
light conditions.
X The image will appear on the screen for
about two seconds.
● You can take a second picture even while
an image is displayed by pressing the
shutter button again.
● Scene Icons
The camera displays an icon for the scene it has determined and then
automatically focuses and selects the optimum settings for subject
brightness and color.
Background
Subject
People– *
Landscapes *
Close Subjects––
Icon Background
Color
* Appears when the scene is dark and the camera is attached to a tripod.
Bright
GrayLight BlueOrangeDark Blue
Including Blue
Skies
BacklitBacklit
Sunsets
Dark
When
Using
Tripod
23
Taking Pictures (Smart Auto)
COPY
Background
SubjectBacklitBacklit
People *
Landscapes–– *
Close Subjects–––
Icon Background
Color
* Appears when the scene is dark and the camera is attached to a tripod.
Under certain conditions, the icon that appears may not match the actual
scene. Especially when there is an orange or blue colored background (a
wall for example), () or the “Including Blue Skies” icons may
appear and it may not be possible to shoot with the appropriate color. If
this happens, try shooting in G mode (p. 60).
Bright
GrayLight BlueDark Blue
Including Blue
Skies
Dark
When
Using
Tripod
24
Taking Pictures (Smart Auto)
COPY
What if...
• What if white and gray frames appear when you point the camera
toward a subject?
When faces are detected, a white frame appears on the face of the
main subject, while gray frames appear on other detected faces. The
frames will follow the subjects within a certain range (p. 72).
• What if a flashing appears?
Attach the camera to a tripod so that the camera does not move and
blur the image.
• What if the camera does not play any sounds?
Pressing the n button while turning on the camera power will turn
off all sounds except for warning sounds. To turn the sounds on, press
the n button, choose the 3 tab, and then choose [Mute]. Press the
qr buttons to choose [Off].
• What if the image comes out dark even if the flash fired when
shooting?
The subject is too far away for the flash to reach. Press the zoom button
toward j and hold it until the lens stops moving. The camera will be at
its maximum wide angle setting and you can shoot within the effective
flash range of approximately 30 cm – 3.0 m (12 in. – 9.8 ft.).
Press the zoom button toward i and hold it until the lens stops
moving. The camera will be at its maximum telephoto setting and you
can shoot within the effective flash range of approximately 30 cm –
2.0 m (12 in. – 6.6 ft.).
• What if the camera beeps once when the shutter button is pressed
halfway?
Your subject may be too close. Press the zoom button toward j and
hold it until the lens stops moving. The camera will be at its maximum
wide angle setting and you will be able to focus on subjects that are
approximately 5 cm (2.0 in.) or more away from the end of the lens.
Press the zoom button toward i and hold it until the lens stops
moving. The camera will be at its maximum telephoto setting and you
will be able to focus on subjects that are approximately 25 cm (9.8 in.)
or more away from the end of the lens.
• What if the lamp lights when the shutter button is pressed
halfway?
To reduce red-eye and to assist in focusing, the lamp may light when
shooting in dark areas.
• What if the screen turns off when you try to shoot?
When flash recharging begins, the screen turns off. The screen turns
on again when recharging ends.
25
Viewing Images
COPY
You can view the images you have taken on the screen.
Enter Playback mode.
1
● Press the 1 button.
X The last image you took will appear.
Choose an image.
2
● Pressing the q button will cycle through the
images in the reverse order they were
taken, from the newest image to the oldest.
● Pressing the r button will cycle through the
images in the order they were taken, from
oldest to newest.
● The images change more quickly if you
keep the qr buttons pressed, but they will
appear coarse.
X The lens will retract after approximately 1
minute elapses.
● Pressing the 1 button again while the lens
is retracted will turn off the power.
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the
camera to Shooting mode.
26
Erasing Images
COPY
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
1
● Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
2
● Press the qr buttons to display an image to
erase.
Erase the image.
3
● Press the p button.
X [Erase?] appears on the screen.
● Press the qr buttons to choose [Erase],
then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to choose [Cancel], then press the
m button.
27
Shooting Movies
COPY
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button.
Enter E mode.
1
● Press the button, then press the qr
buttons to choose E.
● Press the m button.
Shooting Time
Compose the shot.
2
● Pressing the zoom button toward i will
zoom in on your subject, making it appear
larger. Pressing the button toward j will
zoom out from your subject, making it
appear smaller.
Focus.
3
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep twice
and the indicator will light green.
Shoot.
4
● Press the shutter button fully.
28
Elapsed Time
COPY
Microphone
Shooting Movies
X Recording will start, and [ Rec] and the
elapsed time will appear on the screen.
● Once shooting begins, take your finger off
the shutter button.
● If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
● Do not touch the microphone while shooting.
● Do not press any buttons other than the
shutter button while shooting. The sound the
buttons make will be recorded in the movie.
Stop shooting.
5
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Magnifying the subject while shooting
Pressing the zoom button toward i while shooting will zoom in on the
subject. However, operation sounds will be recorded and the movie may
appear coarse.
29
Shooting Movies
COPY
Estimated Shooting Times
Memory Card
Shooting Time32 min. 26 sec.2 hrs. 12 min. 50 sec.
• Shooting times are based on default settings.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
4GB16GB
30
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.