User's Manual
Table of Contents
Getting Started .................... |
4 |
Rider 15 Key Functions................. |
4 |
Reset Rider 15................................ |
4 |
Accessories.................................... |
5 |
Status Icons.................................... |
5 |
Step 1: Charge your Rider 15........ |
6 |
Step 2: Turn On Rider 15............... |
6 |
Step 3: Initial Setup........................ |
6 |
Step 4: Acquire Satellite |
|
Signals............................................ |
7 |
Step 5: Ride Your Bike with |
|
Rider 15........................................... |
7 |
Share Your Records....................... |
7 |
Sync to Bryton Mobile App........... |
8 |
Download Bryton Update Tool.... |
10 |
Settings ............................. |
11 |
Bike Profile................................... |
11 |
Calibrate Altitude.......................... |
12 |
Sensor Pairing.............................. |
12 |
Delete Records............................. |
13 |
GPS System.................................. |
14 |
Unit................................................ |
15 |
Hour............................................... |
16 |
Heading......................................... |
17 |
Adjust Odometer.......................... |
17 |
Bryton App Advanced |
|
Settings ............................ |
18 |
Grid Setting................................... |
18 |
Altitude Calibration...................... |
19 |
Notification................................... |
20 |
Appendix .......................... |
21 |
Specifications ............................... |
21 |
Battery Information...................... |
22 |
Install Rider 15.............................. |
24 |
Install the Speed/Cadence/Dual |
|
Sensor (Optional)......................... |
25 |
Install Heart Rate Belt |
|
(Optional)...................................... |
26 |
Wheel Size and Circumference... |
27 |
Basic Care For Your Rider 15...... |
28 |
Data Fields.................................... |
29 |
2 Índice
WARNING
Always consult your physican before you begin any training. Please read the details in Warranty and Safety information guide in the package.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a majory failure and for compensation for any other reasonably forseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a majoy failure.
Video Tutorial
For a step-by-step demonstration of device and Bryton Mobile App, please scan below QR code to check Bryton Video Tutorials.
https://www.youtube.com/c/DevelopmentBryton
3 Primeros pasos
Getting Started
This section will guide you on the basic preparations before you start using your Rider 15.
Rider 15 Key Functions
Power/OK ( 
/ 
)
xx Press to turn the device on.
xx Press and hold to turn the device off. xx In free cycling, press to start recording.
xx When recording, press to stop recording.
xx In Menu, press to confirm a selection.
MENU ( 
)
xx Press to enter/exit menu mode. xx Press to be back to main menu.
xx Long press to clear notification icons.
Backlight/Page ( 
/ 
)
xx Long press to turn on/off backlight.
xx In Menu, press to move down to scroll through menu options.
xx In Meter mode, press to switch meter screen page.
Reset Rider 15
To reboot the Rider 15, press two keys ( 
/ 
) at the same time.
4 Getting Started
Accessories
The Rider 15 comes with the following accessories:
• USB Cable •Bike Mount |
|
Optional items: |
|
• Smart Heart Rate Monitor |
• Smart Speed Sensor |
• Smart Cadence Sensor |
• Sport Mount |
Status Icons
Icon Description
Bike Type
Bike 1
Bike 2
GPS Signal Status
No GPS Signal
Weak GPS signal
Strong GPS signal
GPS+Galileo+
QZSS+Glonass
GPS+Galileo+
QZSS+Beidou
Power Status
Full battery
Half battery
Low battery
Notification
Incoming Call
Message
NOTE:
Icon Description
Settings
Daylight Saving
Backlight
Morning
Afternoon
North
Heading
Data Field
Gradient
Altitude Gain
Altitude Loss
Ride Time
Trip Time
Cadence Value
Heart Rate Value
Odometer
Distance
Distance 1
Distance 2
Maximum
Average
Icon Description
Data Field
Heart Rate Zone
Maximum Heart
Rate
Lactate
Threshold
Heart Rate
Sensor Pairing
Heart Rate
Sensor
Paired
Speed Sensor
Paired
Cadence Sensor
Paired
Recording
Auto Pause
Bluetooth
Connected
xx Only the active icons are displayed on the screen.
xx Device battery icon ( 
) starts blinking indicating that the battery is low.
xx Sensor icons ( 
, , 
) start blinking indicating that paired sensors are not within connection range.
5 Getting Started
Step 1: Charge your Rider 15
Connect Rider 15 to a PC to charge the battery for at least 4 hours. Unplug the device when it is fully charged.
xx You may see battery icon is blinking when the battery is really low. Keep the device plugged until it is properly charged.
xx The temperature suitable for charging battery is 0°C ~ 40°C. Beyond this temperature range,charging will be terminated and the device will draw power from battery.
Al menos 4 horas
Step 2: Turn On Rider 15
Press 
to turn on the device.
Step 3: Initial Setup
When turning Rider 15 on for the first time, the setup wizard appears on the screen. Follow
the instruction to complete setup.
1. Press 
to select the unit of measurement and temperature.
6 Getting Started
Step 4: Acquire Satellite Signals
Once the Rider 15 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals for the first time use.
The GPS signal Icon ( 
/ 
) appears when GPS is fixed .
xx If GPS signal is not fixed, an
icon appears on the screen.
xx Please avoid the obstructed environments since they might affect the GPS reception.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tunnels |
Inside rooms, |
Under water |
High-voltage |
Construction |
|||||||||||
|
building, or |
|
wires or |
sites and |
|||||||||||
|
underground |
|
television |
heavy traffic |
|||||||||||
|
|
|
|
|
|
|
|
|
|
towers |
|
|
|
||
Step 5: Ride Your Bike with Rider 15
xx Free ride:
In meter view, measurement starts and stops automatically in sync with the movement of the bicycle.
xx Start an exercise and record your data:
In meter view, press 
to start recording, press 
again to stop.
Step 6: Share Your Records
Share Your Tracks to Brytonactive.com
1.Sign up Brytonactive.com
a.Go to https://active.brytonsport.com. b.Register a new account.
2.Connect to PC
Turn on your Rider 15 and connect it to your computer by USB cable.
3.Share Your Records
a.Click “+” on the right upper corner.
b.Drop FIT, BDX, GPX file(s) here or Click “Select files” to upload tracks. c.Click “Activities” to check uploaded tracks.
7 Getting Started
Share Your Tracks to Strava.com
1.Sign up/log in on Strava.com a.Go to https://www.strava.com
b.Register a new account or use your current Strava account to log in.
2.Connect to PC
Turn on your Rider 15 and connect it to your computer by USB cable.
3.Share Your Records
a.Click “+” on the top right corner of Strava page and then click “File”. b.Click “Select Files” and select FIT files from Bryton device.
c.Enter information about your activities and then click “Save & View”.
Sync Data to Bryton Mobile App
Launch Bryton Mobile App
1. Download Bryton Mobile App
Scan below QR Code to download Bryton App or you can go to Google Play for android/ App Store for iOS to search Bryton App and download it.
http://download.brytonsport.com/inst.html
2.Sign up Bryton Mobile App
a.Launch Bryton Mobile App.
b.Register a new account.
NOTE: Bryton Mobile App syncs with Brytonactive.com. If you already have brytonactive.com account, please use the same account to log in to Bryton Mobile App and vice versa.
8 Getting Started
Pair Your Device with Bryton Mobile App
With the connection to Bluetooth, your Rider computer easily uploads recorded tracks. To sync data correctly from your device, it is required to pair your device with Bryton mobile app before syncing data for the first time.
a. Turn on “Bluetooth” on your |
b. Power on your Rider 15. |
c. Tap “ BT Sync” |
mobile phone. |
|
|
d. Select the device you |
e. Tap ”Yes” after checking if |
f. Your device is successfully |
would like to pair , and |
UUID shown on app is the same |
paired with Bryton app. Tap |
tap “+”. |
as your device’s. |
”Finish” . |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: Each device |
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
|
|
Note: UUID |
has its own unique |
||
|
|
|
|
|
is the 16 digit |
UUID, and each |
||
|
|
|
|
|
number on the |
UUID can only be |
||
|
|
|
|
|
back of the device. |
added to one Bryton |
||
|
|
|
|
|
|
account. |
||
|
|
|
|
|
|
|
|
|
g. It would start uploading |
h. All tracks are uploaded. |
i. Go to “Activities” and you |
||||||
tracks from paired device. . |
|
can see tracks are uploaded |
||||||
|
|
|
|
|
|
successfully. |
||
|
|
|
|
|
|
|
|
|
|
Rider_15 |
|
|
|
|
|||
Upload Tracks with One Tap
After successfully pairing your device with Bryton Mobile App, when bluetooth is activated both on your phone and device, all of your activities will be uploaded automatically simply by tapping 
icon in Bryton Mobile APP.
9 Getting Started
Loading...