Brother HL-3160CDW, HL-3190CDW Setup Guide
HL-3160CDW / HL-3190CDW
Operation Videos
www.95105369.com
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner
Cartridge Assemblies*
(Black, Cyan, Magenta, and
Installation
& Using
Videos
Quick Setup Guide Product Safety Guide USB Interface Cable
Yellow)
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
* Already installed in the machine
Waste Toner Box* Belt Unit*
Brother Installation Disc AC Power Cord
CHN-ENG
Version A
NOTE:
•Use the appropriate interface cable for the connection you want to
use. (Network cable is not a standard accessory.)
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
•The illustrations in this Quick Setup Guide show the HL-3160CDW.
Secure Network Access
Your machine’s default password is on the label on
the back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect
your machine from unauthorised access.
1
Remove the packing materials and re-install the drum unit and toner cartridge assembly
Remove all the blue packing tape. Slide all eight yellow drum locks.
Remove the orange part from each drum
unit.
x4
Push firmly.
BK
C
M
2
3
Load paper in the paper tray
Connect the power cord and turn the machine on
Adjust the paper
guides.
Y
Do not exceed this mark.
The paper is face down
into the paper tray.
Back Front
1
4
Select a device to connect to your machine
5
Computer
Go to and follow the instructions.
NOTE:
(For HL-3160CDW)
We recommend configuring wireless settings from your computer.
Connect your computer
Download
Put the installation disc into your CD/DVD drive, or
download the Full Driver & Software Package at:
Mobile Device
Brother regularly updates firmware to add features and apply bug fixes. To
check for the latest firmware, visit support.brother.com/up7.
Follow the on-screen instructions and prompts.
Go to and follow the instructions.
Finished
www.95105369.com
If you are using a recently released operating system on
your computer, visit the above websites for updated driver
and software information.
Can’t Connect? Check the following:
Wireless network
Wired network
USB connection
Restart your wireless access
point/router (if possible).
Disconnect the cable.
For Windows®:
If the Brother screen does not appear automatically, go to Computer
(This PC). Double-click the CD/DVD-ROM icon, and then double-click
start.exe.
For Mac:
For full driver functionality, we recommend choosing the CUPS driver
when adding a printer.
If still not successful, go to .
Restart your machine and
computer, and then go to
.
If still not successful, visit www.95105369.com
for FAQs & Troubleshooting.
6
Alternative wireless setup
Find your SSID (Network Name) and Network
Key (Password) on your wireless access point/
router and write them in the table provided below.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXXX
Network key: XXXX
If you cannot find this information, ask your
network administrator or wireless access
point/router manufacturer.
For LCD models
Toselecteachmenuoption,press▲
or▼,andthenpressOK to confirm.
Select [Network] > [WLAN] >
[Setup Wizard].
For Touchscreen models
Press > [Setup Wizard] >
[Yes].
Select the SSID (Network Name)
for your access point/router and
enter the Network Key (Password).
When the wireless setup is
successful, the Touchscreen/LCD
displays [Connected].
If setup is not successful, restart
your Brother machine and your
wireless access point/router,
and repeat
.
For Computer
Go to to install software.
For Mobile Device
Go to to install apps.
7
Print using your mobile device
Your mobile device must be connected to the same wireless network as your Brother machine.
AirPrint is available for all supported iOS devices including
iPhone, iPad and iPod touch. You do not need to download
any software to use AirPrint. For more information, see the
Online User’s Guide.
Search Mopria from the search engine you use, then
download and install the Mopria® Print Service app using
your Android™ device.
Download and install our free application Brother iPrint&Scan.
Read the two-dimensional code (or visit
www.95105369.com), click iPrint&Scan from the
mobile application menu on the right-lower corner
to enter the download page.
*We suggest Android users using a mobile
browser to scan and download our product.
Optional apps
You can print from your mobile device using various apps.
For instructions, see the Online User’s Guide.
2
For other operation Videos, FAQs, and to download drivers, softwares and manuals, visit www.95105369.com.
For product specifications, see the Online User’s Guide.
© 2018 Brother Industries, Ltd. All rights reserved.
Loading...