Breville BDC600XL User Manual

the YouBrew™

Instruction Book - Livret d’instructions

BDC600XL

BDC600XL_IB_B11.indd 2 25/05/11 1:34 PM

CONGRATULATIONS

on the purchase of your new

Breville YouBrew™

BDC600XL_IB_B11.indd 2 25/05/11 1:34 PM

CONTENTS

4 Breville recommends safety ﬁrst

8 Know your Breville YouBrew™

12 Operating your Breville YouBrew™ 13 Before ﬁrst use

14 Using the YouBrew™ - Carafe Mode 17 Using the YouBrew™ - Single Cup Mode 20 Programming the Clock (Optional) 20 Programming Auto-Start (Optional) 21 Changing the ‘Ready’ Signal Volume

22 Helpful Tips

24 Care & cleaning

28 Troubleshooting

35 One Year Limited Warranty

36 French

BDC600XL_IB_B11.indd 3 25/05/11 1:34 PM

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS

• Carefully read all instructions before

operating the appliance for the ﬁrst time and save for future reference.

• Remove and safely discard any

packaging materials and promotional labels before using the appliance for the ﬁrst time.

• To eliminate a choking hazard for young

children, remove and safely discard the protective cover ﬁtted to the power plug of this appliance.

• Do not place the appliance near the edge

of a bench or table during operation. Ensure that the surface is level, clean and free of water.

• Always operate the appliance on a stable

and heat resistant surface. Do not use on a cloth-covered surface, near curtains or other ﬂammable materials.

• Do not place the appliance on or near a

hot gas burner, electric element or where it could touch a heated oven.

• Do not operate the appliance on metal

surfaces, for example, a sink drain board.

• Position the appliance with a minimum

distance of 4” (10cm) of space on both sides of the appliance. This will allow for adequate air circulation.

• Always ensure the appliance is properly

assembled before connecting to a power outlet and operating. Follow the instructions described in this book.

• Do not operate the appliance without

water in the water tank. Use only cold, preferably ﬁltered water. Do not use any other liquid.

• Ensure the supplied gold tone ﬁlter or

a paper ﬁlter (8-12 cup, ﬂat base basket style with ~ 3¼"/8.25cm base) is placed in the coffee basket before using the appliance. Do not use the gold tone ﬁlter in conjunction with a paper ﬁlter.

• Never open the swing-out door

and remove the coffee basket while brewing. Hot water and coffee can cause injury. Allow to drain before removing to avoid scalding.

• The carafe is designed for use with this

appliance only. It must never be used on a range top or in a microwave.

• Always ensure the carafe is completely

empty of any contents before brewing.

• Always ensure the carafe lid is

securely locked in place onto the carafe then placed under the drip stop outlet before brewing.

• Scalding may occur if the carafe lid is

removed during the brewing cycle.

• Always ensure the carafe lid is

securely locked in place onto the carafe before pouring.

• Do not use the carafe with a cracked,

loose, weakened or damaged handle.

• Do not touch hot surfaces. Use the

handle for lifting and carrying the carafe.

• Do not set a hot carafe on a wet, cold or

heat sensitive surface.

• Do not operate the grinder without

the bean hopper lid in position. Keep ﬁngers, hands, hair, clothing and utensils away from the bean hopper during operation. Avoid contact with moving parts.

• Check the grinder for presence of

foreign objects before using.

BDC600XL_IB_B11.indd 4 25/05/11 1:34 PM

BREVILLE RECOMMENDS SAFETY FIRST

• Use the grinder to grind roasted coffee

beans only. Grinding other substances, such as nuts, spices or unroasted beans may dull the burr and cause poor grinding or injury.

• Always switch the appliance off by

pressing the POWER button off. Remove the power plug from the power outlet before attempting to move the appliance, when the appliance is not in use and before cleaning and storing. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

• Keep the appliance and accessories clean.

Strictly follow the care and cleaning instructions described in this book.

• Do not use cleaners, steel wool pads or

other abrasive materials when cleaning any part of this appliance.

• This appliance is not intended to be

operated by means of an external timer or separate remote control system.

• The use of attachments not sold or

recommended by Breville may cause ﬁre, electric shock or injuries.

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

• Fully unwind cord before use.

• To protect against electric shock, do not

immerse cord, plug or appliance in water or any other liquid.

• Do not let the cord hang over the edge

of a bench or table, touch hot surfaces, or become knotted.

• Do not leave the appliance unattended

when in use.

• This appliance is not intended for use

by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure

they do not play with the appliance.

• This appliance is recommended for

household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.

• It is recommended to regularly inspect

the appliance. Do not use the appliance if the power supply cord, power plug, or appliance becomes damaged in anyway. Immediately cease use and visit www.Breville.com or call Breville Customer Service on 1-866-273-8455 for examination, repair or adjustment.

• For any maintenance other than

cleaning, visit www.Breville.com or call Breville Customer Service on 1-866-273-8455.

• This appliance is equipped with a

power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.

• If the appliance is of the grounded

type, the extension cord should be a grounding 3-wire cord. If the power outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

• Do not, under any circumstances, cut or

remove the third (ground) prong from the power cord or use an adapter.

• Consult a qualiﬁed electrician if

the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

BDC600XL_IB_B11.indd 5 25/05/11 1:34 PM

BREVILLE RECOMMENDS SAFETY FIRST

SHORT CORD INSTRUCTIONS

Your Breville appliance is ﬁtted with a short power supply cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow children to use or be near this appliance without close adult supervision. Longer detachable power supply cords or extension cords are available and may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a ﬁnger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your appliance may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

CALIFORNIA PROPOSITION 65:

(Applicable to California residents only).

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

BDC600XL_IB_B11.indd 6 25/05/11 1:34 PM

BDC600XL_IB_B11.indd 7 25/05/11 1:34 PM

KNOW

your Breville YouBrew™

BDC600XL_IB_B11.indd 8 25/05/11 1:34 PM

KNOW YOUR BREVILLE YOUBREW™

Pick how you want your coffee. The YouBrew’s intelligent features take care of the rest

You pick your beans & roast…

You pick your brew strength…

You pick your flavor profile…

You pick a single cup, travel mug or carafe…

The YouBrew’s integrated burr grinder grinds your choice of beans just prior to brewing for maximum freshness, flavor and aroma. The grind is preset to the optimal size and can be turned off when using pre-ground coffee.

The YouBrew’s 7 strength settings vary the amount of freshly ground coffee for a 'MILD', 'STRONG' or 'INTENSE' brew. The stronger the strength setting selected, the more coffee is ground. There is no need to calculate how much coffee you need for the amount of water in the tank. Simply select the desired strength and the BrewIQ™ System will intelligently dose the correct amount of coffee to ensure a consistent strength regardless of whether you choose a single cup, travel mug or whole carafe.

The YouBrew’s 5 flavor settings vary the steeping time of the coffee and water. The 'LITE' setting steeps for less time to produce a light-flavored cup. The 'BOLD' setting steeps for more time for a bolder, more full-flavored coffee.

The YouBrew gives you the flexibility to brew directly into a cup, travel mug or carafe. Set the optional Auto-Start feature and have a travel mug ready to go in the morning. Brew a single cup for one person at night. Alternatively, brew a whole carafe for weekend entertaining. The BrewIQ™ System will intelligently pre-heat and dose to ensure the temperature and strength of your brew is consistent regardless of whether you choose a single cup, travel mug or whole carafe.

BDC600XL_IB_B11.indd 9 25/05/11 1:34 PM

KNOW YOUR BREVILLE YOUBREW™

All parts of the YouBrew™ that come into contact with coffee and water and BPA Free.

2 3

5 6 7

1. Bean Hopper Lid

2. 0.5lb Bean Hopper

3. Bean Hopper Locking System seals the

base of the bean hopper for easy removal, storage and transfer of coffee beans.

4. Cleaning Brush for convenient

cleaning of the grinding burrs and coffee grinds chute.

5. Integrated Burr Grinder grinds

whole beans just prior to brewing for maximum freshness, ﬂavor and aroma. Grinder can be turned off when using pre-ground coffee.

6. 12-Cup (60oz) Water Tank with

ﬂip-top lid for convenient, front-access ﬁlling. Grille prevents large debris from entering the tank while the ‘MAX’ level ﬂoat rises when the tank is full.

7. Contoured Control Panel with angled

design for easy viewing of the backlit LCD screen.

8. Coffee Grinds Chute delivers ground

coffee from the bean hopper to the coffee basket.

13 14 15 16

9. Removable Grinds Catcher catches loose

grinds from the coffee grinds chute.

10. Carafe Lid.

11. 12-Cup Double-Wall, Stainless Steel

Thermal Carafe

12. Removable Gold Tone Filter

13. Soft Opening, Swing-Out Door with

safety interlock system prevents operation if the coffee basket is not correctly assembled or the door is not properly closed.

14. Removable Coffee Basket lifts out for

easy ﬁlling and cleaning. Holds the included gold tone ﬁlter or paper ﬁlters.

15. Steam Bafﬂe assists with water overﬂow

if the coffee basket becomes blocked.

16. Brew Pause Drip Stop temporarily

ceases the ﬂow of coffee when the carafe is removed so a cup can be poured mid-brew.

17. Drip Tray can be removed for direct

brewing into tall cups & travel mugs.

BDC600XL_IB_B11.indd 10 25/05/11 1:34 PM

KNOW YOUR BREVILLE YOUBREW™

18 26

19 20 21 22 23 24 25

18. OPEN button

• Press to open the swing-out door.

19. SINGLE CUP button

• Press to brew a single cup of coffee.

• Continue pressing to select between 9 brew sizes.

20. CARAFE button

• Press to brew a carafe of coffee.

• Continue pressing to select a speciﬁc carafe size between 2 cups (minimum) and 12 cups (maximum).

21.

button

• Use in conjunction with the STRENGTH | FLAVOR button to increase the volume of the ‘Ready’ signal.

• Use in conjunction with the STRENGTH | FLAVOR button to increase the brew strength and ﬂavor.

• Use in conjunction with the PROGRAM button to program the clock and Auto-Start.

22.

button

• Use in conjunction with the STRENGTH | FLAVOR button to decrease the volume of the ‘Ready’ signal.

• Use in conjunction with the STRENGTH | FLAVOR button to decrease the brew strength and ﬂavor.

• Use in conjunction with the PROGRAM button to program the clock and Auto-Start.

23. STRENGTH | FLAVOR button

• Press to adjust the brew strength. 7 settings plus ‘PRE-GROUND’ coffee setting vary the amount of freshly ground coffee for a mild, strong or intense brew.

• Press to adjust the ﬂavor. 5 settings vary the steeping time of the coffee and water to produce a light-ﬂavored cup or a bolder, more full-ﬂavored coffee.

24. PROGRAM | SET CLOCK button

• Press to program the clock (‘TIME NOW’ time).

• Press to program the Auto-Start (‘START AT’ time).

25. START | CANCEL button

• Press to start or cancel the brew cycle.

26. POWER button

• Press to turn the power on or off, or to exit out of POWER SAVE mode.

BDC600XL_IB_B11.indd 11 25/05/11 1:34 PM

OPERATING

your Breville YouBrew™

BDC600XL_IB_B11.indd 12 25/05/11 1:34 PM

BEFORE FIRST USE

• Before using the YouBrew™ for the ﬁrst

time, ensure you have unpacked all parts and accessories before removing and safely discarding all packaging material and promotional labels. Ensure the power cord is unplugged from the power outlet.

• Wipe the exterior stainless steel

housing with a soft, damp cloth. Wash the bean hopper and lid, coffee basket, gold tone ﬁlter and carafe in warm, soapy water and a soft cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface. Rinse and dry thoroughly.

INITIAL SET UP

1. Install the Bean Hopper

Position the hopper onto the machine. Turn the locking knob clockwise in the direction of the LOCK arrow until it clicks. Fill the hopper with fresh beans. We recommend always keeping the hopper full (0.5lb maximum) to ensure there are sufﬁcient beans. However, never over-pack the hopper as this may result in the grinder jamming. Replace the hopper lid.

NOTE

The coffee machine will enter POWER SAVE mode after remaining idle for 10 minutes. Press the POWER button to exit POWER SAVE mode and re-start the machine.

3. Install the Coffee Basket

For best results, we recommend pre-heating the coffee basket by running it under hot tap water. Ensure to dry the coffee basket thoroughly, taking particular care to completely dry the chute area. Line the coffee basket with either the provided gold tone ﬁlter or a paper ﬁlter. Never use both at the same time.

a) Provided gold tone ﬁlter. When using

the gold tone ﬁlter, be sure that the handle is positioned towards the hinge area of the coffee basket. If you do not, the handle may interfere with the ﬂow of ground coffee into the gold tone ﬁlter.

HANDLE TOWARDS

COFFEE BASKET HINGE

ENSURE CHUTE

AREA IS

COMPLETELY DRY

NOTE

For easy removal, storage and transfer of beans, the hopper can be removed by turning the locking knob counter-clockwise in the direction of the UNLOCK arrow. If you have removed the hopper, ensure it is securely reassembled back onto the machine. The safety interlock system will prevent operation if the hopper is incorrectly assembled. The LCD screen will ﬂash ‘LOCK BEAN HOPPER’ until the issue is resolved.

NOTE

The gold tone ﬁlter will allow some ﬁne coffee grounds to fall into the coffee. This will appear as sediment in the cup or carafe. This is normal.

Only use the gold tone ﬁlter provided as others may cause the machine to

2. Plug in the Power Cord

overﬂow.

Unwind the power cord completely and insert the power plug into a grounded 110-120V power outlet. Press the POWER button. The LCD screen will illuminate.

BDC600XL_IB_B11.indd 13 25/05/11 1:34 PM

USING THE YOUBREW™ - CARAFE MODE

CLICK

b) Paper ﬁlter (8-12 cup, ﬂat base basket

style with ~ 3¼"/8.25cm base). Ensure that the paper ﬁlter is completely open and touching the side walls and bottom of the coffee basket.

Close the coffee basket lid. Press the OPEN button to open the swing-out door. Attach the coffee basket to the swing-out door by ensuring the hinge area of the coffee basket is ﬁrmly seated in its most downward position on the two door hooks. Close the door until it clicks shut.

NOTE

The safety interlock system will prevent operation if the coffee basket is not in place, if it is not ﬁrmly seated on the two door hooks, or if the swing-out door is not closed. The LCD screen will ﬂash ‘EMPTY COFFEE FILTER’ until the issues are resolved.

USING THE YOUBREW™

- CARAFE MODE

First Time Use Only

We recommend ﬂushing the machine to remove any dust particles or residues from the manufacturing process. Follow the proceeding instructions, ensuring to completely ﬁll the water tank (Step 1), select ‘12 CUPS’ (Step 3) and the ‘PRE-GROUND’ coffee setting (Step 4). However do not add any coffee to the coffee basket. Once the cycle is complete, discard the water from the carafe and repeat the cycle again for best results. The machine is now ready to use.

1. Fill the Water Tank

Press open the ﬂip-top lid. Pour the desired amount of cold, preferably ﬁltered water into the tank using a jug or the provided carafe. If using the carafe, ensure the carafe lid is securely locked in place. The LCD screen will indicate the amount of water in the tank as it is ﬁlled. The machine will beep when full and the water level ﬂoat will rise to indicate the maximum level. Do not exceed the 12 cup maximum. Doing so may cause the carafe to overﬂow or water spillage at the back of the machine. Close the ﬂip-top lid.

NOTE

Check the water level on the LCD screen before use. We recommend always keeping the water tank full. The water tank should be reﬁlled with cold, preferably ﬁltered water. Do not ﬁll with any other liquid.

NOTE

Never pour water into the bean hopper or grinding chamber area. Doing so can cause the grinder to clog. Only re-commence use when the grinding chamber and grinding burrs are completely dry. Refer to Troubleshooting, ‘Moisture clogging

BDC600XL_IB_B11.indd 14 25/05/11 1:34 PM

grinder’, page 29.

USING THE YOUBREW™ - CARAFE MODE

NOTE

Never ﬁll the water tank once the coffee machine has started a brewing cycle. This will affect the volume dispensed into the carafe.

2. Pre-Warm the Carafe

A warm carafe will help maintain the coffee’s optimal temperature and keep coffee hotter for longer. Remove the carafe lid by turning counter-clockwise then lifting upwards. Fill the carafe with hot water for about 30 seconds then discard the water. To lock the carafe lid back into position, align the arrow on the carafe lid with the ALIGN arrow on the carafe. Turn clockwise until the arrow on the carafe lid aligns with the LOCK arrow on the carafe. This ensures that the lid is closed and in the proper position for brewing and pouring. Place the carafe into position under the drip stop outlet.

ALIGN ARROWS THEN TURN TO LOCK

NOTE

Ensure the carafe is completely empty and the lid is securely locked in place before placing under the drip stop outlet. Starting a brew cycle with water or coffee in the carafe will cause the carafe to over ﬂow.

3. Select ‘Carafe’ Mode

Press the CARAFE button. The LCD screen will display a carafe symbol and the current number of cups selected. Continue pressing the CARAFE button to select the desired number of cups. You can choose less than the current tank level (2 cup minimum), while the maximum is the amount of water in the tank, up to 12 cups.

4. Select the Brew Strength or ‘PRE-GROUND’ Coffee Setting

Press the STRENGTH button. The LCD screen will ﬂash the current strength setting and the

and buttons will illuminate

and ﬂash. Use these buttons to cycle through 7 strength settings from ‘MILD’, ‘STRONG’ to ‘INTENSE’ or for the ‘PRE-GROUND’ coffee setting.

Press the STRENGTH button to select. The LCD screen will cease to ﬂash once selected.

NOTE

If using pre-ground coffee, select the ‘PRE-GROUND’ coffee setting. This will disable the burr grinder. Add preground coffee to the gold tone ﬁlter or a paper ﬁlter (8-12 cup, ﬂat base basket style with ~ 3¼"/8.25cm base). We recommend 1 level tablespoon of pre-ground coffee per 5oz/150ml cup of water. Adjust the amount according to your individual taste. The maximum capacity for pre-ground coffee is 16 level tablespoons. Exceeding this amount may cause overﬂow.

When using the machine for the ﬁrst time, we recommend selecting the ‘PRE-GROUND’ coffee setting, however omitting the addition of pre-ground coffee. This will ﬂush the machine and remove any dust particles or residues from the manufacturing process.

BDC600XL_IB_B11.indd 15 25/05/11 1:34 PM

USING THE YOUBREW™ - CARAFE MODE

5. Start the Brew Cycle

Press the START | CANCEL button. The grinder will commence grinding the correct amount of coffee for the selected brew size and strength. If the ‘PRE-GROUND’ coffee setting has been selected, the grinder will be disabled.

NOTE

Steam may emit from the rear steam vent during grinding and brewing. This is normal.

The count-down timer will then begin. The time displayed is an estimate only and will depend on the amount and strength settings you have selected.

The LCD screen will display:

a) ‘PRE-HEATING’ as the water is heated

to the optimal temperature. The pre-heating time will depend on the starting temperature of the water in the water tank.

b) ‘BREWING’ as the coffee is dispensed

into the carafe.

To stop the cycle at any time, press the START | CANCEL button. You will hear a winding noise. This is normal.

CAUTION

Never open the swing-out door and remove the coffee basket while brewing. Hot water and coffee can cause injury.

6. Using the Brew Pause Feature

The Brew Pause feature temporarily ceases the ﬂow of coffee when the carafe is removed so a cup can be poured mid-brew. Do not remove the carafe for longer than 20 seconds or the coffee may overﬂow the coffee basket.

7. Empty the Coffee Basket

Once the brewing cycle is complete, the ready signal will sound and a winding noise will be heard. This is normal. The coffee machine will automatically shut-off, however the LCD screen will ﬂash ‘EMPTY COFFEE FILTER’ as a reminder to remove the coffee basket and discard the used grinds. Wash the coffee basket, taking particular care to rinse the chute area. Then dry the coffee basket and chute area thoroughly.

We also recommend checking the coffee grinds chute disc for any build-up of coffee grinds. This is the stainless steel disc that is visible when the swing-out door is opened. A build-up of grinds on this disc can affect the performance of the machine. Wipe the disc clean then dry thoroughly.

CAUTION

The coffee basket and gold tone or paper ﬁlter may still be very hot after brewing. Use caution and allow to cool before removing.

8. Pour and Enjoy

Ensure the carafe lid is securely locked in position. There is no need to turn or adjust the lid before pouring. The lid automatically opens when pouring and closes when not to keep coffee hot.

CAUTION

Hot steam may rise when pouring. The bottom of the carafe is hot to touch for several minutes after brewing. Use caution and ensure not to set the carafe on a heat sensitive surface.

BDC600XL_IB_B11.indd 16 25/05/11 1:34 PM

USING THE YOUBREW™ - SINGLE CUP MODE

USING THE YOUBREW™

- SINGLE CUP MODE

First Time Use Only

We recommend ﬂushing the machine to remove any dust particles or residues from the manufacturing process. Follow the instructions, ‘Using the YouBrew™ - Carafe Mode’, ensuring to completely ﬁll the water tank (Step 1), select ‘12 CUPS’ (Step 3) and the ‘PRE-GROUND’ coffee setting (Step 4). However do not add any coffee to the coffee basket. Once the cycle is complete, discard the water from the carafe and repeat the cycle again for best results. The machine is now ready to use.

1. Fill the Water Tank

Press open the ﬂip-top lid. Pour the desired amount of cold, preferably ﬁltered water into the tank using a jug or the provided carafe. If using the carafe, ensure the carafe lid is securely locked in place. The LCD screen will indicate the amount of water in the tank as it is ﬁlled. The machine will beep when full and the water level ﬂoat will rise to indicate the maximum level. Do not exceed the 12 cup maximum. Doing so may cause water spillage at the back of the machine. Close the ﬂip-top lid.

NOTE

Never ﬁll the water tank once the coffee machine has started a brewing cycle. This will affect the volume dispensed into the cup.

2. Pre-Warm the Cup or Travel Mug

A warm cup will help maintain the coffee’s optimal temperature and keep coffee hotter for longer. Fill the cup with hot water for about 30 seconds then discard the water. Place the cup into position under the drip stop outlet.

TIP

For taller cups and travel mugs, remove the drip tray at the base of the machine. Press the OPEN button to open the swing-out door. Insert the cup/mug into the drip tray cavity before closing the swing-out door. The maximum cup/mug dimensions are

7.5" height, 2¾" diameter.

REMOVE DRIP TRAY, OPEN DOOR,

INSERT CUP, CLOSE DOOR.

BDC600XL_IB_B11.indd 17 25/05/11 1:34 PM

USING THE YOUBREW™ - SINGLE CUP MODE

3. Select ‘Single Cup’ Mode

Press the SINGLE CUP button. The LCD screen will display a cup symbol and the current cup size selected. Continue pressing the SINGLE CUP button to select the desired size.

There are 9 size options to accommodate for different amounts or milk, half-andhalf and creamer. Below is a guide to the amount brewed at each setting. Always ensure your cup is an adequate size for the setting selected.

SETTING AMOUNT BREWED

1 ~ 7.5oz

2 ~ 9.5oz

3 ~ 11oz

4 ~ 12.5oz

5 ~ 14.5oz

6 ~ 16oz

7 ~ 17.5oz

8 ~ 19.5oz

9 ~ 21oz

The amounts above are approximate only. Actual amounts may vary due to the type of ﬁlter used, the coffee bean size, roast, blend and freshness, or amount and type of preground coffee used.

4. Select the Brew Strength or ‘PRE-GROUND’ Coffee Setting

Press the STRENGTH | FLAVOR button. The LCD screen will ﬂash the current strength setting and the

and buttons

will illuminate and ﬂash. Use these buttons to cycle through 7 strength settings from ‘MILD’, ‘STRONG’ to ‘INTENSE’ or for the ‘PRE-GROUND’ coffee setting.

Press the STRENGTH | FLAVOR button to select. The LCD screen will ﬂash the current ﬂavor setting.

NOTE

If using pre-ground coffee, select the ‘PRE-GROUND’ coffee setting. This will disable the burr grinder. Add pre-ground coffee to the gold tone ﬁlter or a paper ﬁlter (8-12 cup, ﬂat base basket style with ~ 3¼"/8.25cm base). We recommend 1 level tablespoon of pre-ground coffee per 5oz/150ml cup of water. Adjust the amount according to your individual taste. The maximum capacity for pre-ground coffee is 16 level tablespoons. Exceeding this amount may cause overﬂow.

5. Select the Flavor Setting

Press the STRENGTH | FLAVOR button until the LCD screen ﬂashes the current ﬂavor setting and the

and buttons

illuminate and ﬂash. Use these buttons to cycle through 5 ﬂavor settings from ‘LITE’ to ‘BOLD’. These settings vary the steeping time of the coffee and water. The ‘LITE’ setting steeps for less time to produce a light-ﬂavored cup. The ‘BOLD’ setting steeps for more time for a bolder, more full-ﬂavored coffee.

Press the STRENGTH | FLAVOR button to select. The LCD screen will cease to ﬂash once selected.

BDC600XL_IB_B11.indd 18 25/05/11 1:34 PM

PROGRAMMING THE CLOCK (OPTIONAL)

6. Start the Brew Cycle

NOTE

Steam may emit from the rear steam vent during grinding and brewing. This is normal.

The count-down timer will then begin. The time displayed is an estimate only and will depend on the amount, strength and ﬂavor settings you have selected. The LCD screen will display:

a) ‘PRE-HEATING’ as the water is heated

to the optimal temperature. The pre-heating time will depend on the starting temperature of the water in the water tank.

b) ‘STEEPING’ as coffee and water are

steeped together.

c) ‘BREWING’ as the coffee is dispensed

into the cup.

To stop the cycle at any time, press the START | CANCEL button. You will hear a winding noise. This is normal.

CAUTION

Never open the swing-out door and remove the coffee basket while brewing. Hot water and coffee can cause injury.

7. Empty the Coffee Basket

CAUTION

The coffee basket, gold tone or paper ﬁlter may still be very hot after brewing. Use caution and allow to cool before removing.

NOTE

If using the gold tone ﬁlter, you may notice the brewing cycle ﬁnish before the ready signal sounds. This is normal. The total brewing time displayed on the LCD screen is calculated using paper ﬁlters as coffee passes through paper ﬁlters slower.

BDC600XL_IB_B11.indd 19 25/05/11 1:34 PM

PROGRAMMING THE CLOCK / AUTO-START (OPTIONAL)

PROGRAMMING THE CLOCK (OPTIONAL)

You must set the clock to use the Auto-Start feature. Always remember to reset the clock for time changes, power outages and when you unplug the machine.

1. Press the PROGRAM button until the

LCD screen displays ‘TIME NOW’. Once this appears, press and hold the PROGRAM button until the PROGRAM button illuminates red and the LCD screen displays a ﬂashing ‘AM’.

2. Use the

either AM or PM.

3. Press the PROGRAM button. The

LCD screen will display a ﬂashing hour.

4. Use the

the desired hour.

5. Press the PROGRAM button. The

LCD screen will display a ﬂashing minute.

6. Use the

the desired minute.

TIP

For faster scrolling, press and hold the

and buttons.

7. Press the PROGRAM button to

ﬁnish. The LCD screen will display ‘TIME NOW’ and the programmed time.

PROGRAM

SET CLOCK

and buttons to select

PROGRAMMING AUTO-START (OPTIONAL)

The Auto-Start feature allows you to program the speciﬁc time when the coffee machine will automatically turn on and start the preheating and grinding cycle.

1. Ensure the clock is set.

2. Press the PROGRAM button until

the LCD screen displays ‘START AT’. Once this appears, press and hold the PROGRAM button until the PROGRAM button illuminates red and the LCD screen displays a ﬂashing ‘AM’.

3. Use the

either AM or PM.

4. Press the PROGRAM button.

The LCD screen will display a ﬂashing hour.

5. Use the

the desired hour.

6. Press the PROGRAM button.

The LCD screen will display a ﬂashing minute.

7. Use the

the desired minute.

TIP

For faster scrolling, press and hold the

and buttons.

8. Press the PROGRAM button.

The LCD screen will display ‘TIME NOW’. Press the START | CANCEL button. The LCD screen will dim and display ‘PROGRAM ON’ to indicate that the Auto-Start feature has been successfully turned on. If ‘PROGRAM ON’ does not appear, then the Auto-Start feature has not be activated.

and buttons to select

BDC600XL_IB_B11.indd 20 25/05/11 1:34 PM

CHANGING THE ‘READY’ SIGNAL VOLUME

NOTE

Always remember to reset the clock and Auto-Start time when there is a time change, power outage or after you unplug the machine.

START

CANCEL

9. Ensure that the coffee machine

is correctly assembled and prepared with:

• Sufﬁcient water in the water tank and

coffee beans in the bean hopper.

• The coffee basket assembled with

an empty gold tone ﬁlter or paper ﬁlter (8-12 cup, ﬂat base basket style with ~ 3¼"/8.25cm base).

• Either a cup, travel mug or carafe

positioned under the drip stop outlet.

NOTE

To cancel a programmed Auto-Start, press the START | CANCEL button until the LCD screen no longer displays ‘PROGRAM ON’.

NOTE

The Auto-Start feature must be selected each time you want to pre-schedule a brew. Press the PROGRAM button until the LCD screen displays ‘START AT’. The coffee machine will remember the last programmed Auto-Start time, so simply press the START | CANCEL button to re-select. Ensure ‘PROGRAM ON’ is displayed on the LCD screen.

CHANGING THE ‘READY’ SIGNAL VOLUME

The volume of the ‘Ready’ signal can be changed to suit your preference. There are 3 options:

HIGH

LOW

MUTE

Press and hold the STRENGTH | FLAVOR button until the LCD screen ﬂashes one of the sound icons pictured above. While the icon ﬂashes, use the select the desired volume. The volume is selected once the icon stops ﬂashing.

The selected volume will remain displayed on the LCD screen.

or button to

BDC600XL_IB_B11.indd 21 25/05/11 1:34 PM

HELPFUL TIPS

for your Breville YouBrew™

BDC600XL_IB_B11.indd 22 25/05/11 1:34 PM

+ 50 hidden pages