We design and manufacture our products with your safety foremost in
mind. We ask that you exercise a degree of care when using any electrical
appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
READ ALL INSTRUCTIONS
BEFORE USE, AND SAVE FOR
FUTURE REFERENCE
• Remove and discard all
packaging materials and
stickers before first use.
• To avoid choking hazard
for young children, remove
and safely dispose the
protective cover fitted on
the power plug.
• This appliance is for
household use only. Do not
use it in moving vehicles or
boats, do not use it outdoors,
and do not use it for anything
other than its intended use.
Misuse can cause injury.
• This appliance shall not be
used by children. Keep the
appliance and its cord out of
reach of children.
• Cleaning and user
maintenance shall not be
made by children without
supervision.
• Children shall not play with
this appliance.
• This appliance can be used
by persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and if
they understand the hazards
involved.
• Do not use the appliance
near the edge of a countertop
or table. Ensure the surface
is level, clean and free of
water and other substances.
Please be aware that vibration
during use may cause the
appliance to move.
• Do not use the appliance
on (or close to) a hot gas or
electric burner, or where it
could touch a heated oven
or surface.
2
BREVILLE RECOMMENDS SAFETY FIRST
• Do not allow the cord to hang
over the edge of a countertop,
or to become knotted.
• To avoid electric shock, do
not immerse the cord, plug
or motor base in water (or
other liquids).
• Installation of a residual
current device (a standard
safety switch on your wall
socket) is recommended to
provide additional safety
protection when using
appliances. It is advisable
that a safety switch (with
a rated residual operating
current not more than
30mA) be installed in the
electrical circuit supplying
the appliance. Contact
your electrician for further
professional advice.
• Do not operate appliance
with a damaged cord or
plug, or after appliance
malfunctions, or if dropped
or damaged in any way. Stop
use immediately and contact
Breville by phone or email for
replacement or repair.
• All maintenance (other
than cleaning) is to be done
by an authorised Breville
Service Centre.
• Authorised Breville Service
Centres can be found on
our website
www.Breville.com.au
Alternatively, you can contact
the Breville Customer Care
Centre by phone on
1300 273 845 or email
AskUs@breville.com.au
• In order to avoid the possible
hazard of the blender starting
by itself due to inadvertent
resetting of the overload
protector on the motor, do not
attach an external switching
device (such as a timer) or
connect the blender to a
circuit that can regularly
switch the blender on and off.
3
BREVILLE RECOMMENDS SAFETY FIRST
SAFEGUARDS FOR
YOUR BLENDER
• Wash the blender jug with
warm soapy water before
first use.
• Use only the blender jug
and lid that is supplied
with this blender. The use
of attachments, including
canning jars or accessories
not manufactured or
specified by Breville may
cause the risk of fire, electrical
shock, or injury.
• Always ensure the blender is
assembled properly before
using. Lid must be firmly
secured to the jug before
operation to ensure internal
contents do not escape, spray
or overflow.
• If the motor is straining
under a heavy load, do not
operate continuously for
more than 10 seconds. Allow
the motor to rest for 1 minute
between uses on heavy loads.
Note that none of the recipes
in these instructions are
considered a heavy load.
• Flashing light indicates ready
to operate. Avoid any contact
with blades or moving parts.
• Keep hands, fingers, hair
and clothing away from the
blender during use. Always
turn blender off and unplug
at the wall before reaching
inside.
• Be careful when handling the
blender jug as the blades are
very sharp. Be careful when
emptying the jug and during
cleaning. Mishandling of the
blades may cause injury.
• Do not remove the jug from
the motor base while blender
is in use.
• The blender is intended for
food or drinks preparation.
Do not use for anything
other than food or drinks.
Do not operate without any
ingredients in the blender jug.
• Never attempt to operate
with damaged blades, or
with utensils, or any foreign
objects inside the blender jug.
• Do not leave the blender
unattended when in use.
4
BREVILLE RECOMMENDS SAFETY FIRST
• To reduce the risk of severe
injury to persons or damage
to the blender, keep hands
and utensils out of the jug
while blending. The scraper
and frozen dessert wand
provided can be used,
provided the main lid is in
place.
• Never blend boiling hot
liquids. Allow temperature to
drop before putting into the
jug for blending.
• Be careful if hot liquid is
poured into the blender, as it
can be ejected out of the jug
due to sudden steaming.
• When blending hot liquids
ensure inner measuring cap
is in place. Cap will protect
from splashing of hot liquids
during blending and includes
vents designed to relieve
pressure and avoid steam
build up.
• Be careful removing the lid
after blending hot liquids, as
steam traps can form in the
liquid and be ejected out of
the jug.
• Do not put the blender jug in
extremes of heat or cold, for
example placing a cold jug
into hot water, or vice versa.
• Before moving the blender,
cleaning or putting it away for
storage, always turn blender
off and unplug at the wall.
SAVE THESE INSTRUCTIONS
5
KNOW YOUR BREVILLE PRODUCT
KNOW YOUR BREVILLE PRODUCT
C
D
A
B
M
L
E
G
F
I
J
6
K
H
KNOW YOUR BREVILLE PRODUCT
A. Inner measuring cap
Remove to add ingredients
while blending.
B. High performance lid
Withstands high velocity tasks,
and is designed to vent steam and
prevent splatter.
C. 2.0 Litre BPA-free Tritan™ jug
Impact resistant, shatter proof and
dishwasher safe.
D. ProKinetix
®
extra-wide, heavy duty
blade and bowl system
Designed with 3 powerful stainless
steel blades contoured to the base of
the jug for maximum cutting power and
processing results including liquid-free
processing. The wide blades create
the Kinetix
®
motion, and eliminate
food traps.
E. Heavy duty metal coupling
For durable and long lasting
performance under demanding
conditions.
F. LCD timer
Counts down for pre-programmed
settings, and counts up for speed
dial settings.
G. Heavy duty 2200W motor
High velocity power combined with high
torque for outstanding results.
H. Manual speed control
Wide speed range from super slow
stir up to high speed milling for
precise control.
I. Durable die-cast metal base
J. 5 preset programs
Optimise the blender’s capabilities
for crushing ice, smoothies, green
smoothies, milling and soup.
K. Overload protection
Resettable thermal fuse for
motor protection.
Accessories
L. Scraper
Designed to push food down from the
walls, or for easily removing ingredients
after blending.
M. Frozen Dessert Wand
Helps make frozen desserts by pushing
thick foods directly into the blades.
Eastman Tritan™ Copolyester
This blender jug is made with Eastman
Tritan™ copolyester, which is a tough,
BPA-free polymer used to make housewares
products that can stand up to extreme use
and repeated dishwasher cleaning. Products
made from Tritan™ are impact resistant
and shatter resistant and stay clear and
durable even after hundreds of cycles in the
dishwasher.
Breville Assist™ Plug
Your Breville appliance comes with a unique
Breville Assist™ Plug, conveniently designed
with a finger hole to ease removal from the
wall outlet.
7
OPERATING YOUR BREVILLE PRODUCT
GETTING STARTED
ON | OFF
The ON | OFF button powers the unit into
READY mode.
Ready mode
The blender will default to MANUAL.
MANUAL FEATURES
Speed control dial
There are 12 speed settings from STIR
through to MILL.
STIR mixes more delicate foods with a slow
stirring motion and light pausing to fold
ingredients together.
MILL is the fastest setting, and is ideal for
milling nuts, grains and seeds.
The blender is programmed to allow
manual speeds to run for 3 minutes before
automatically stopping.
PAUSE | PLAY
Pauses and holds the speed and timer for up
to 2 minutes. Press PAUSE | PLAY again
to resume.
Pause is also activated if the jug is removed
from base during use. Replace jug, and press
START to resume.
Repeat function
If the START button is pressed when
using the manual speed dial, or if the timer
finishes, the current speed setting will be
held for 2 minutes to allow a quick repeat of
the cycle.
Pressing the START button will re-start this
repeat cycle.
If you want to clear the previous speed from
the memory, press and hold the START
button for 2 seconds.
Sleep
After 2 minutes of inactivity, LCD powers
off, and the ON | OFF button flashes red.
After 5 minutes of inactivity, the blender
turns OFF completely. Press the ON | OFF
button to reactivate.
Count-up timer
If the timer isn’t set, the blender timer
counts up in seconds as it blends. When
using the timer this way, the blender will
stop after 3 minutes, or you can cancel
blending manually.
Count-down timer
The alternative to running the blender in
count-up mode is to set the blending time
before starting.
8
OPERATING YOUR BREVILLE PRODUCT
PRESET PROGRAMS
PULSE | ICE CRUSH (60 seconds)
Optimised to crush ice, and has an
intelligent sensor to stop the motor when
ice is done. This cycle is also ideal for
processing other foods that need sudden
bursts of power.
SMOOTHIE (60 seconds)
Optimised to combine and aerate frozen
and liquid ingredients together. The
SMOOTHIE function has a unique
processing technique that blends the denser
ingredients at lower speed, then increases
in speed as ingredients thicken. This
will happen several times while blending
smoothies. The programming also circulates
the ingredients for maximum aeration and a
creamy texture.
GREEN SMOOTHIE (60 seconds)
Optimised to break down whole hard
ingredients like fruits, leafy greens and
seeds, and allows them to blend together
with other soft and liquid ingredients.
FROZEN DESSERT (60 seconds)
Optimised to break down and combine
frozen ingredients quickly. Use the frozen
dessert wand for best results.
SOUP (6 minutes)
This preset program runs for 6 minutes to
blend and heat ingredients to make soups.
The program has a slow start to combine
ingredients before running at high speed,
and ends with a couple of stirs to release
any steam bubbles that may have formed in
the soup.
WARNING
Never blend boiling hot liquids. Allow
temperature to drop before putting
into the jug for blending.
AUTO CLEAN
Use to remove most of the ingredients off
the blender walls and blades. Add 500ml
warm soapy water, and press the AUTO
CLEAN button. For harder to clean, sticky
or thick ingredients, add ½ teaspoon of
dish liquid detergent for extra cleaning
power. For best results, run the clean cycle
immediately after use.
PAUSE | PLAY
Pauses and holds a program mid-cycle for
up to 2 minutes. Press PAUSE | PLAY again
to resume.
Pause is also activated if the jug is removed
from base during use. Replace jug, and press
START to resume.
Note: If the blender is running and you
press a different preset button, it will switch
to that program without stopping.
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.