INSTRUCTIONS
INSTRUCTIONS
CONTENTS
Panel Introduction
Basic Function
Remote Control Operation
Turn on/off
Access main interface
USB/SD Card Operation
Radio Operation
Disc Operation
Play/Eject Disc
DVD/VCD Disc Playback
CD Disc Playback
MP3/WMA Format Disc Playback
Touch Menu
ST. Wheel setting
BT Operation
Media Operation
External input operation
Other Operation
Rear view function
Access setup interface
General setting
Time setting
Language setting
Audio setting
Video setting
Radio setting
Touch calibration
Wiring Diagram
Trouble shooting
Specifications
Accessory
DVD Parental control function
02
03
04
06
06
06
07
08
08
08
08
08
08
09
10
11
11
12
12
13
13
13
13
14
14
14
14
16
16
17
18
18
ACCESSORY
Accessory
Wire
USB Cable
Remote Controller
Warranty card
Disassemble Key
DVD Parental control function
DVD Parental control function
DVD Parental control function: The default set
for DVD is #8 adult, which means all grades of
DVD can be read without entering password. To
change the default grade, you need to follow the
below procedure: Press SETUP button on the
remote, display will show the system set up menu
and the submenu, select password and enter
0000, you will be able to choose the DVD
grade as default.
Quantity
1PC
1PC
1PC
2PCS
2PCS
Warning: To ensure safety while driving and to comply with laws, drivers
should not watch video or operate the video device while driving.
1801
INSTRUCTIONS INSTRUCTIONS
SPECIFICATIONS
Power supply
Power range
Max Current Consumption
Ground system
Power Output
FM tuner
US frequency range
European frequency range
Signal / Noise ratio
Stereo separation
Search station volt
AM tuner
US frequency range
European frequency range
Limit noise sensitivity
DVD player
S / N Ratio
Frequency response
DC 12V
10.8-16.0V DC
15A
Negative ground
80 WattsX4 Channels
87.5-107.9MHz
87.5-108MHz
55dB
30dB
20-30dBuv
530-1710KHz
522-1620KHz
32dB
70dB
20Hz-20KHz
PANEL INTRODUCTION
1
2
3
4
5
6
7
8
1. /SRC Button
2. MUTE Button
3. MODE Button
9 10
11
This unit is with switchable frequency.
You can switch from USA frequency to Europe frequency by following the below steps:
Step1. In main menu, press setup icon to enter the setup interface.
Step2. Press the Radio icon, and insert password 123456, then press “OK”,
the menu from which you can select the radio frequency will show.
Step3. Press “Radio region” and select the desired frequency by pressing the “up”
and “down” arrow, then press it and setting is finished.
4. SD Slot
5. RESET
6. SEL/VOL Button
7. AUX IN
8. USB Slot
9. Disk Load Slot
10. OPEN Button
11. IR
0217