BOSCH NET8666SUC, NET8666UC User Manual

Cooktop

Use and Care Manual
NET8666UC, NET8666SUC
1(78&




 


1(768&


 








() = cm
Table of Contents
Use and care manual
Safety Definitions .......................................................... 4
IMPORTANT SAFETY INSTRUCTIONS ........................ 5
Fire Safety .............................................................................. 5
Cooking Safety ...................................................................... 5
Burn Prevention .................................................................... 6
Child Safety ........................................................................... 6
Cleaning Safety ..................................................................... 6
Cookware Safety .................................................................. 6
Proper Installation and Maintenance ................................ 6
State of California Proposition 65 Warnings ................... 7
Causes of damage ......................................................... 8
Protecting the environment .......................................... 8
Energy-saving advice ........................................................... 8
Getting familiar with the appliance .............................. 9
Control panel ......................................................................... 9
Heating elements ................................................................. 9
Residual heat indicator .................................................... 10
Operation ...................................................................... 10
Main power switch ............................................................ 10
Setting the cooktop ........................................................... 10
Cook time ........................................................................... 12
Kitchen timer ...................................................................... 12
Automatic Shutoff .............................................................. 12
Child lock ............................................................................ 13
Clean Lock .......................................................................... 13
Basic Settings .................................................................... 13
Cleaning and Maintenance ......................................... 14
Daily Cleaning .................................................................... 14
Cleaning guidelines .......................................................... 14
Cleaning charts .................................................................. 15
Maintenance ....................................................................... 15
Service .......................................................................... 16
Troubleshooting ................................................................. 16
Technical service ............................................................... 17
STATEMENT OF LIMITED PRODUCT WARRANTY ... 17
What this Warranty Covers & Who it Applies to .......... 17
How Long the Warranty Lasts ......................................... 17
Repair/Replace as Your Exclusive Remedy ................ 17
Out of Warranty Product .................................................. 18
Warranty Exclusions ......................................................... 18
Produktinfo.
Additional information on products, accessories, replacement parts and services can be found at
www.bosch-home.com and in the online shop www.bosch-home.com/us/store
3

Safety Definitions

9 WARNING
This indicates that death or serious injuries may occur as a result of non-observance of this warning.
9 CAUTION
This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.
Note: This alerts you to important information and/or tips.
4

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INS READ AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been designed to be safe and reliable. Read all instructions carefully before use. These precautions will reduce the risk of burns, electric shock, fire, and injury to persons. When using kitchen appliances, basic safety precautions must be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of transport damage, do not plug it in.
Fire Safety
Do not allow aluminum foil, plastic, paper or cloth to come in contact with a hot surface element, burner or grate. Do not allow pans to boil dry.
If the cooktop is near a window, forced air vent or fan, be certain that flammable materials such as window coverings do not blow over or near the burners or elements. They could catch on fire.
Always have a working smoke detector near the kitchen. Never leave the cooktop unattended when in use.
Boilovers cause smoking and greasy spillovers may ignite.
WARNING
TO REDUCE THE RISK OF A GREASE FIRE:
a.
Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
b.
Always turn hood ON when cooking at high heat.
c.
Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
d.
Use proper pan size. Always use cookware appropriate for the size of the surface element.
Do not flambé under the extractor hood or work with a naked flame. When switched on, the extractor hood draws flames into the filter. There is a risk of fire due to deposits on the grease filter!
In the event that personal clothing or hair catches fire, drop and roll immediately to extinguish flames.
Have an appropriate fire extinguisher available, nearby, highly visible and easily accessible near the appliance.
Smother flames from food fires other than grease fires with baking soda. Never use water on cooking fires.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
a.
SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
b.
NEVER PICK UP A FLAMING PAN – You may be burned.
c.
DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
d.
Use an extinguisher ONLY if:
- You know you have a Class ABC extinguisher, and you already know how to operate it.
- The fire is small and contained in the area where it started.
- The fire department is being called.
- You can fight the fire with your back to an exit.
Whenever possible, do not operate the ventilation system during a cooktop fire. However, do not reach through fire to turn it off.
Cooking Safety
WARNING
Use this appliance only for its intended use as described in this manual. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in overheating the appliance. Never use the appliance for storage.
When using the timer, always supervise the cooktop and do not allow anything to boil over or burn. Boilovers can cause smoke and some foods and oils may catch fire if left on high temperature settings.
Never use the appliance if liquids or foods have spilled around the control panel. Always turn off the cooktop and dry the control panel.
Injury and damage to the appliance may occur if control elements are not used properly.
If the cooktop turns off automatically and can no longer be operated, it may turn itself on unintentionally at a later point. Switch off the circuit breaker in the fuse box. Contact the after-sales service.
WARNING
If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
5
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Burn Prevention
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS - Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing, potholders, or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among these areas are the cooktop and areas facing the cooktop.
Do not heat or warm unopened food containers. Build-up of pressure may cause the container to burst and cause injury.
Always use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
Use high heat settings on the cooktop only when necessary. To avoid bubbling and splattering, heat oil slowly on no more than a low-medium setting. Hot oil is capable of causing extreme burns and injury.
Never move a pan of hot oil, especially a deep fat fryer. Wait until it is cool.
Secure all loose garments, etc. before beginning. Tie long hair so that it does not hang loose, and do not wear loose fitting clothing or hanging garments, such as ties, scarves, jewelry, or dangling sleeves.
WARNING
RISK OF BURNS Metallic objects become hot very quickly on the cooktop.
Never set down metallic objects, such as knives, forks, spoons and lids on the cooktop.
If the display does not work when a cooking area is heating up, disconnect the circuit breaker from the fuse box. Contact an authorized servicer.
CAUTION
Items of interest to children should not be stored in an appliance, in cabinets above an appliance or on the backsplash. Children climbing on an appliance to reach items could be seriously injured.
Cleaning Safety
Do not clean the appliance while it is still hot. Some cleaners produce noxious fumes when applied to a hot surface. Wet clothes and sponges can cause burns from steam.
Do not use steam cleaners to clean the appliance.
Cookware Safety
Hold the handle of the pan when stirring or turning food. This helps prevent spills and movement of the pan.
Use Proper Pan Size. The use of undersized cookware will expose a portion of the heating element or burner to direct contact and may result in ignition of clothing. Select cookware having flat bottoms large enough to cover the surface heating unit. This appliance is equipped with one or more surface units of different size. Proper relationship of cookware to heating element or burner will also improve efficiency.
Cookware not approved for use with ceramic cooktops may break with sudden temperature changes. Use only pans that are appropriate for ceramic cooktops (only certain types of glass, heatproof glass, ceramic, earthenware, or other glazed utensils are suitable).
Always position handles of utensils inward so they do not extend over adjacent work areas, burners, or the edge of the cooktop. This reduces the risk of fires, spills and burns.
WARNING
Child Safety
When children become old enough to use the appliance, it is the legal responsibility of the parents or legal guardians to ensure that they are instructed in safe practices by qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on any part of an appliance, especially a door, warming drawer, or storage drawer. This can damage the appliance, and the unit may tip over, potentially causing severe injury.
Do not allow children to use this appliance unless closely supervised by an adult. Children and pets should not be left alone or unattended in the area where the appliance is in use. They should never be allowed to play in its vicinity, whether or not the appliance is in use.
6
RISK OF INJURY When cooking with a bain-marie, the cooktop and
cooking vessel may crack due to overheating. The cooking vessel in the bain-marie must not come in direct contact with the bottom of the pot filled with water. Use only heat-resistant cookware.
Always keep the cooktop and bases of pots dry. Liquid between the potbase and the cooktop may build up steam pressure, causing the pot to jump suddenly and causing injury.
Proper Installation and Maintenance
Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded by a qualified technician. Connect only to properly grounded outlet. Refer to Installation Instructions for details.
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
This appliance is intended for normal family household use only. It is not approved for outdoor use. See the Warranty. If you have any questions, contact the manufacturer.
Do not store or use corrosive chemicals, vapors, flammables or nonfood products on or near this appliance. It is specifically designed for use when heating or cooking food. The use of corrosive chemicals in heating or cleaning will damage the appliance and could result in injury.
Do not operate this appliance if it is not working properly, or if it has been damaged. Contact an authorized servicer.
Do not cook on a broken cooktop. Cleaning solutions and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless specifically recommended in this manual. Refer all servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the appliance, switch power off at the service panel and lock the panel to prevent the power from being switched on accidentally.
State of California Proposition 65 Warnings
WARNING
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
7

Causes of damage

Scratches on glass ceramic surface: Cookware with
rough bottoms will scratch the glass ceramic surface.
Salt, sugar and sand: Salt, sugar or grains of sand will
scratch the glass ceramic surface. Never use the cooktop as a working surface or for setting things down.
Overheated cookware: Avoid heating pots or pans
that are empty.
Hot cookware: Never set down hot pans and pots on
the control panel or frame. This may cause damage.

Protecting the environment

Energy-saving advice
Always place a fitting lid on cookware. Cooking with
an uncovered pan will increase energy consumption considerably. Use a glass lid to provide visibility and avoid having to lift the lid.
Use cookware equipped with a solid, flat bottom.
Curved pan bases increase energy consumption.
The diameter of the pan base must match the size of
the element. If not, energy may be wasted.
Choose cookware of a size suited to the amount of
food you are going to cook. A large pan that is only half full will use a lot of energy.
Use a small amount of water when cooking. This
saves energy, and vegetables retain a larger percentage of their vitamins and minerals.
Select a lower power level.
Hard and sharp objects: Hard or sharp objects falling
on the cooktop may damage it.
Boiled-over food: Sugar and products containing
sugar may damage the cooktop. Immediately eliminate spills of these products with a glass scraper.
Foils and plastics: Aluminum foil and plastic will melt
on the hot cooking zones. Stove protective film isn't suitable for your cooktop.
Unsuitable cleaning agent: Shimmering metallic
discolorations on the glass ceramic surface result from the use of inappropriate cleaning agents and abrasion from cookware.
8

Getting familiar with the appliance

In this section we describe the control panel, elements and displays.
Control panel
0O0GG
Display icons
> D V ‰‰
q ¶
Cleaning protection on Child lock on Kitchen timer on Timer value Cook time function on Cook time set on lit element
‰. Power level ‚-Š
Ready Residual heat /œ
ð à
Dual element Bridge element
$MFBO-PDL
$IJME-PDL
5JNFS
NJO
@
These instructions apply to more than one cooktop, your appliance might vary slightly.
Page 2 contains a list of models and dimensions.
Touch keys On/Off Main power switch
Clean Lock/ Child Lock
Timer Cook time function
à ö
$
0 - 9 Temperature levels
A @
Touch control zone
When you touch a symbol, the corresponding function will be activated.
NOTICE: Always keep the touch control zones clean and dry. Moisture and dirt can affect proper functioning.
Cleaning protection / Child safety
Bridge element Additional heating elements Select cooking element
Step temperature level down/up in steps of 0.5
Heating elements
Element Turning on and off
Single element Single elements have only one size cooking surface.
$
Always use cookware of a suitable size.
Dual element The size of these elements can be matched to your pan size. The heating element must be
ð
turned on.
Turning off the outer heating ribbon: Touch ö. The ð display will turn off. Adding the outer heating ribbon: Touch ö again. The ð display will turn on.
9
Element Turning on and off
Bridge element The Bridge element combines two individual heating elements into one long griddle zone. This
à
configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm). Turning on the Bridge element: Touch one of the two $ touch keys for selecting the heating
element, then touch the à key. The à symbol will appear; both heating elements are now selected. appears in both displays. Within the next 10 seconds select the desired heat setting (1-9). The Bridge element and both individual heating elements are now on.
Changing the heat setting: Touch one of the two $ touch keys for selecting the Bridge ele- ment, and set the new heat level within the next 10 seconds.
Turning off the Bridge element feature: Touch one of the two
$ touch keys for selecting the
Bridge element, and select 0 from the number keys. appears in both displays. The heating elements will turn off and the residual heat indicator will appear.
Residual heat indicator
The cooktop is equipped with a residual heat indicator for each element. It shows you which elements are still hot. Avoid touching the indicated elements.
is shown on the display, the element is still hot.
If an You could use it, for example, to keep a small quantity of

Operation

Main power switch
Use the main switch to turn on the electronic circuitry for the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key. A beep will sound. The __ indicator located on top of the On/Off touch key lights up.
Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out. The cooktop is switched off. The residual heat indicators will remain on until the elements have cooled off sufficiently.
Note: The cooktop switches off automatically when all the elements have been switched off for more than 10 seconds.
If residual heat is still present when the cooktop is turned on, /œ will appear in the heating element display.
food warm or to melt a chocolate coating. As the element continues to cool, the display changes to
œ. The display
goes out once the element has cooled sufficiently. The residual heat indicator will automatically come on
after a power failure. The display lights up for approximately 30 minutes.
Setting the cooktop
This section will show you how to set the elements. The table contains details on the heat settings for a variety of dishes.
Setting the element
Select the desired heat level using the number keys 1 to 9.
Heat level 1 = minimum power Heat level 9 = maximum power Each heat setting has an intermediate level. This level is
indicated by . and is set using @ and A.
Selecting the heat level
The cooktop must be turned on.
1.
Touch the $ touch key for the corresponding element. The indicator will appear in the element display and light up brightly.
2.
Within the next 10 seconds touch the desired heat setting (1-9) in the touch control zone.
10
¯
'BTU
4NBSU
1SFIFBU
$IFG

1SPHSBNT
,FFQ
8BSN
'BTU
1SFIFBU
4NBSU
$IFG
1SPHSBNT
,FFQ
8BSN
Changing the heat level
Choose the heating element and in the touch control zone select the desired setting for continuous cooking.
Turning off the element
Select the element and set the heat level to 0. The element is turned off and the residual heat indicator is
Note: The heat is turned on and off to regulate the temperature of the element; this means that the red glow below the element is not always visible. When you select a low heat setting, the element turns off for longer intervals, while at a higher setting these intervals are very short. Even at the highest level, the element turns on and off.
displayed.
Settings table
The following table provides some examples. Cooking times may vary depending on the type of food, its weight and quality. Deviations are therefore possible.
Set the element to heat setting 9 for bringing to the boil or initial frying, then switch back to appropriate setting (not for melting).
9 CAUTION
During cooking, stews or liquid meals such as soups, sauces or drinks can heat up too quickly unnoticed and overflow or spatter. For this reason we recommend that you stir continuously, gradually heating the food at a suitable power level.
Power levels
Melting
chocolate 1 - 2 butter 1 - 2
Heating
frozen vegetables (e.g. spinach) 2. - 3. broth 7 - 8 thick soup 1. - 2. milk** 1 - 2
Simmering
delicate sauce e.g. Béchamel sauce 4 - 5 spaghetti sauce 2 - 3 pot roast 4 - 5 fish* 4 - 5
Cooking
rice (with double amount of water) 2 - 3 potatoes boiled in their skins with 1-2 cups of water 4 - 5 boiled potatoes with 1-2 cups of water 4 - 5 fresh vegetables with 1-2 cups of water 2. - 3. frozen vegetables with 1-2 cups of water 3. - 4. pasta (2-4 qt. water)* 6 - 7 pudding** 1 - 2 cereals 2 - 3
Frying
pork chop*** 5. - 6. chicken breast*** 5 - 6 bacon 6 - 7 eggs 5 - 6 fish 5 - 6 pancakes 5. - 6. Deep fat frying** (in 1-2 qt. oil) deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving) 8 - 9 other e.g. doughnuts (0.5 lb per serving) 4. - 5. * ongoing cooking without lid ** without lid *** turn several times
11
Cook time
You can use the timer function to set a cook time for any element. The element will turn off automatically once the set time has elapsed.
9 CAUTION
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or burn. Boilovers can cause smoke and foods and oils may catch on fire if left on high temperature settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
1.
Select the desired element and power level.
2.
Touch the Timer key twice. The indicator for the desired element lights up. r and min appear, and ‹‹ lights up on the Timer display.
Changing cook time
Select the element and touch the Timer key twice. Set the new cook time using the number keys 0 to 9.
Cancelling cook time
Select the desired element and touch the Timer symbol twice. The min, __ and
r indicators light up. Then select
0 from the number keys until ‹‹ is displayed.
Automatic timer
With this function you may select a cook time for all elements. Once an element is turned on, the selected time will begin to count down. The element will automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in the chapter "Basic settings".
Note: The cook time can be changed or cancelled for any element:
Touch the Timer key several times until the $ indicator of the required element lights up. Adjust the cook time with touch keys 1 to 9 or deactivate with 0.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is independent of the other settings. You can also use the kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an element.
NJO
$MFBO-PDL
0O0GG
3.
Within the next 10 seconds, set the required time
$IJME-PDL
5JNFS
[
  
using the number keys.
NJO
$MFBO-PDL
0O0GG
$IJME-PDL
5JNFS



The timer begins to count down. The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has elapsed. You will hear a beep. The indicator appears in the element display. ‹‹ lights up for 10 seconds on the Timer display. The indicators disappear and the beep stops.
Setting the kitchen timer
1.
Touch the Timer key. ‹‹ appears in the timer display. The __, min and V indicators light up.
2.
Set the required time using the number keys 0 to 9. After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
Once the time has elapsed
At the end of the programmed time, a beep will sound and ‹‹ will appear on the timer display. The V indicator is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and V indicators light up. Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and V indicators light up. Touch the 0 key until ‹‹ appears on the timer display. The V indicator goes out.
Automatic Shutoff
The appliance features an automatic shutoff function. Automatic shutoff is activated when the settings have not been changed over an extended period of time. The time when automatic shutoff is activated is based on the temperature selected.
Shutoff Activated
”‰ appears in the display. Operation is interrupted.
Touch any key to make the display indicator disappear. You can now adjust the settings.
12
Child lock
You can use the child lock to prevent children from accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off. Touch Clean Lock/Child Lock for 4 seconds. The D
indicator lights up for 4 seconds. The cooktop is now locked.
Turning the child lock off
Touch Clean Lock/Child Lock for 4 seconds. The safety panel lock is now canceled.
9 CAUTION
The child lock may be accidentally turned on and off due to:
water spilled during cleaningfood that has overflowedobjects being placed on the Clean Lock/Child
Lock touch key.
Basic Settings
The appliance has various basic settings. You can adjust these settings to the way you usually cook.
Automatic child lock
With this function, the child lock is automatically activated whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Clean Lock
Cleaning the control panel while the cooktop is on may change the settings.
In order to avoid this the cooktop has a Clean Lock function. Touch Clean Lock/Child Lock. The >indicator appears. The control panel is locked for approximately 35 seconds. You can now clean the surface of the control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean Lock is deactivated.
The Clean Lock function does not affect the main switch. You can turn off the cooktop at any time.
Display Function
™‚
Automatic child lock
Off* On
™ƒ
Sound signals
Confirmation beep and error signal off Only error signal on ƒ All signals on*
™†
Automatic timer
Off* ‚-ŠŠ Automatic shut-off time
™‡
Duration of timer end signal
10 seconds* ƒ 30 seconds 1 minute
™ˆ
Activation of additional heating elements
OffOn*. ƒLast setting before turning off the heating element
*factory settings
13
Display Function
™Š
Selection time for cooking zone
Unlimited*: You can adjust the settings of the last cooking zone used at any time without having to
select it again.
Restricted: You can adjust the settings for the last cooking zone used within 10 seconds after select-
ing it. After that you will have to reselect the cooking zone before setting it.
™‹
Reset to basic settings
Off* Reset the appliance to basic settings
*factory settings
Changing the basic settings
The cooktop should be turned off.
1.
Turn on the cooktop with the main switch.
2.
Within the next 10 seconds, touch the Timer key for 4 seconds.
™‚ appears in the timer display. appears on the
display of the front left element.
¯
$MFBO-PDL
0O0GG
3.
Touch the Timer key until the number of the desired
$IJME-PDL
5JNFS

 
basic setting appears in the timer display.

Cleaning and Maintenance

4.
Select the required setting using the number keys. For basic settings with a double digit input (™†) the value is distributed to the left and right front element display.
$MFBO-PDL
0O0GG
5.
Touch the Timer key again for 4 seconds. The setting is activated.
Leaving the basic settings
Turn off the cooktop with the main switch.
$IJME-PDL
5JNFS

 
 
Daily Cleaning
Note: Recommended cleaners indicate a type of cleaner
and do not constitute an endorsement of a specific brand.
Glass ceramic cooktop
9 CAUTION
Do not use any kind of cleaner on the glass while the surface is hot, use only the razor blade scraper. The resulting fumes can be hazardous to your health. Heating the cleaner can chemically attack and damage the surface.
Clean the surface when it is completely cool with the following exception: remove dry sugar, sugar syrup, tomato products and milk immediately with the razor blade scraper (see special care chart).
14
Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry. Use white vinegar if smudge remains; rinse.
Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel or cloth.
Stainless steel side trim
Wipe with the grain when cleaning. For moderate/heavy soil, use BonAmi® or Soft Scrub® (no bleach).
Wipe using a damp sponge or cloth, rinse and dry.
Cleaning guidelines
When using a cleaner, use only a small amount; apply to a clean paper towel or cloth. Wipe on the surface and buff with a clean dry towel.
For best results, use cleaners such as glass ceramic cooktop cleaner, BonAmi®, Soft Scrub® (without bleach), and white vinegar.
Avoid these cleaners
Glass cleaners which contain ammonia or chlorine
bleach. These ingredients may damage or permanently stain the cooktop.
Caustic cleaners - cleaners such as Easy Off® may
stain the cooktop surface.
Abrasive cleaners.
Metal scouring pads and scrub sponges such as
Scotch Brite® can scratch and/or leave metal marks.
Soap-filled scouring pads such as SOS® can scratch
the surface.
Powdery cleaners containing chlorine bleach can
permanently stain the cooktop.
Flammable cleaners such as lighter fluid or WD-40.
Cleaning charts
Type of Soil Possible Solution Dry sugar, sugar syrup, milk or tomato spills. Melted
plastic film or foil. All these items REQUIRE IMMEDIATE REMOVAL. Failure to remove these immediatly can per­manently damage the surface.
Remove these types of spills while the surface is hot using the razor blade scraper. Use a new, sharp razor in the scraper. Remove pan and turn off the element. Wear­ing an oven mitt, hold scraper at 30° angle, using care not to gouge or scratch the glass. Push soil off the heated area. After the surface has cooled, remove the residue and apply the glass ceramic cooktop cleaner.
9 WARNING
RISK OF INJURY The blade is extremely sharp. Risk of cuts. Protect
the blade when not in use. Replace the blade imme­diately when any imperfections are found. Follow manufacturer’s instructions.
Burned-on food soil, dark streaks, and specks Soften by laying a damp paper towel or sponge on top of
soil for 30 minutes. Use a plastic scrubber and glass ceramic cooktop cleaner or use the razor blade scraper. Rinse and dry.
Greasy spatters Use a soapy sponge or cloth to remove grease; rinse
thoroughly and dry. Apply glass ceramic cooktop cleaner.
Metal marks: Iridescent stain Pans with aluminum, copper or stainless steel bases may
leave marks. Treat immediately after surface has cooled with glass ceramic cooktop cleaner. If this does not remove the marks, try a mild abrasive (Bon Ami®, Soft Scrub® without bleach) with a damp paper towel. Rinse and reapply glass ceramic cooktop cleaner. Failure to remove metal marks before the next heating makes removal very difficult.
Hard water spots:
Hot cooking liquids dripped on surface
Minerals in some water can be transferred onto the sur­face and cause stains. Use undiluted white vinegar, rinse and dry. Recondition with glass ceramic cooktop cleaner. Remove boilovers and stains before using the cooktop again.
Surface scratches:
Small scratches are common and do not affect cooking. They become smoother and less noticeable with daily use of the glass ceramic cooktop cleaner.
Apply glass ceramic cooktop cleaner before using to remove sand-like grains and grit such as salt and sea­soning. Scratches can be reduced by using pans with bases that are smooth, clean, and dry before use. Use recommended glass ceramic cooktop cleaner daily.
NOTICE: Diamond rings may scratch the surface.
Maintenance
This appliance requires no maintenance other than daily cleaning. For best results, apply cooktop cleaning cream daily.
15

Service

Troubleshooting
If you encounter a problem, it often will merely be something minor. Before you call customer service, consider the suggestions and instructions below:
Fault Possible cause Measure
Cooktop is not working The electric power supply has been
interrupted.
The appliance has not been cor­rectly connected following the con­nection diagram.
Electronic system malfunction. Contact the Technical Assistance Service.
is flashing on the ele-
ment display
flashes on all ele-
ment displays. An accoustic signal sounds
The cooktop turns off by itself
Display and numbers
Display and numbers
The touch control zone is wet, very dirty, food has boiled over, or an object is lying on top of the touch control zone.
The main switch has been activated continuously for more than 5 sec­onds.
The main switch has been touched unintentionally.
A fault in the electronic system has occurred.
A fault has been detected. The following table of error messages lists actions you
9 CAUTION
Repairs should only be done by a trained servicer. Improper repair of your appliance may result in risk
of severe physical injury or death.
Use other electrical appliances to check if there has been a power outage. Check to see if there is a prob­lem with the circuit breaker for the electrical installa­tion.
Make sure that the appliance has been connected cor­rectly.
Clean the touch control zone, or remove the object. Lightly touch the corresponding touch key. The flash­ing should stop.
Press the power key again. Reset the cooktop.
Press the main switch again. Reset the cooktop.
Turn the appliance off and back on at the fuse or cir­cuit breaker. If the same fault occurs again, discon­nect the appliance and call Technical Assistance Service.
can take to correct the problem
Error messages
”ƒ
”…
”‰
--------
The element is too hot and has turned off.
The touch control zone is too hot. Make sure that cookware is properly positioned on
The element was in continuous use for too long.
Remove the pans from the elements. ”ƒ disappears when you press the display, if the element has cooled down sufficiently. Wait a few minutes until the element has cooled down a bit. If ”ƒ appears again after the element is turned back on, the cooktop is still too hot. Turn off the elements and allow them to cool further.
the element, and no hot objects are in contact with the touch control zone. Wait a few minutes until the touch control zone has cooled down. If ”… appears after you turn on the appliance, call Technical Assis­tance Service.
The automatic time limitation has been activated. Touch any key. You can now turn on the heating ele­ment immediately.
16

Notes

The cooktop regulates the heating element
temperature by turning the heat source on and off; this means that the reddish glow of the heat source beneath the heating element may not always be visible. If you select a low heat setting, the heat source is frequently off; at higher settings it is seldom off. The source turns on and off even at the highest settings.
You may hear a quiet hum when the heating elements
are in the heating phase. The heating elements may glow with different levels of brightness. Depending on the angle from which you are looking at the heating element, this glow may be visible over the marked edge of the heating element. These are technical characteristics. They have no effect on quality and function.
Glass ceramic may have uneven areas on the surface
due to the nature of the material itself. Because of the mirror-like finish on the cooking surface, even extremely small bubbles less than 1 mm in diameter may be visible. These bubbles will not have any adverse effect on the operation of the cooktop nor on the durability of the glass ceramic cooking surface.
Depending on the countertop that is present in the
kitchen, an uneven gap between the cooktop unit and the countertop can occur. For this reason, a flexible seal is provided around the entire cooktop unit.

Technical service

Contact our Technical Service Department if your appliance needs repair. Our central Customer Service Center (see below) will also be happy to supply you with details on a center close to you.
E number and FD number:
When you contact our service, please have the Model(E) number and the FD number for your appliance available. You can find the identification plate with these numbers on the underside of the appliance and in the appliance booklet.
Questions? Please contact us. We look forward to hearing from you!

ZZZERVFKKRPHFRP
0DLQ6WUHHW6XLWH
,UYLQH&$

STATEMENT OF LIMITED PRODUCT WARRANTY

What this Warranty Covers & Who it Applies to
The limited warranty provided by BSH Home Appliances Corporations (“BSH“) in this Statement of Limited Product Warranty applies only to the Bosch appliance (“Product“) sold to you, the first using purchaser, provided that the Product was purchased:
For your normal, household (non-commercial) use,
and has in fact at all times only been used for normal household purposes.
New at retail (not a display, "as is", or previously
returned model), and not for resale, or commercial use.
Within the United States or Canada, and has at all
times remained within the country of original purchase.
The warranties stated herein apply only to the first purchaser of the Product and are not transferable.
BSH reserves the right to request proof of purchase at the time any warranty claim is submitted to confirm that the Product falls within the scope of this limited product warranty.
Please make sure to return your registration card; while not necessary to effectuate warranty coverage, it is the best way for BSH to notify you in the unlikely event of a safety notice or product recall.
How Long the Warranty Lasts
BSH warrants that the Product is free from defects in materials and workmanship for a period of three hundred sixty-five (365) days from the date of purchase. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever.
This Product is also warranted to be free from cosmetic defects in material and workmanship (such as scratches of stainless steel, paint/porcelain blemishes, chip, dents, or other damage to the finish of the Product), for a period of thirty (30) days from the date of purchase or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts, as well as differences caused by kitchen lighting, product location, or other similar factors. This cosmetic warranty specifically excludes any display, floor, “As Is”, or “B” stock appliances.
Repair/Replace as Your Exclusive Remedy
During this warranty period, BSH or one of its authorized service providers will repair your Product without charge to you (subject to certain limitations stated herein) if your Product proves to have been manufactured with a defect in materials or workmanship. If reasonable attempts to repair the Product have been made without success, then BSH will replace your Product (upgraded models may be available to you, in BSH’s sole discretion, for an
17
Loading...
+ 39 hidden pages