Bosch MSM66150RU Instructions for Use

		Register			your
						and
		new
			device on
		MyBosch now
		get free		benefits:
		bosch-
		home.
					com/
		welcome

ErgoMixx

Accessories (Hand blender)

MSM6...RU

[en]	Instruction manual	Accessories (Hand blender)	3
[ru]	Инструкция по эксплуатации	Принадлежности (Погружной блендер)	6

For your safety

en

For your safety

This accessory is designed for the hand blender ErgoMixx MSM6... . Follow the operating instructions for the hand blender.

The accessories are suitable only for the use described in these instructions.

WWRisk of injury from sharp blades!

Never reach into the blade of the universal cutter. Take hold of the universal cutter blade by the plastic handle only. Do not touch the blade of the universal cutter with bare hands. Clean with a brush. The universal cutter must be completely assembled before use!

Important!

Do not attach or remove accessories until the appliance is at a standstill. Never use the hand blender (blender foot) in the universal cutter container. The universal cutter is not microwave-safe.

Do not attach or remove the attachment for the universal cutter until the appliance has come to a standstill. Never immerse the attachment of the universal cutter in liquids and do not clean under running water or in the dishwasher.

Never insert the whisk into the base unit without the gear attachment. Never immerse the gear attachment in liquids and do not clean under running water or in the dishwasher.

Before use, read these instructions carefully in order to become familiar with important safety and operating instructions for this appliance. Please keep the operating instructions in a safe place.

If passing on the appliance to a third party, always include the operating instructions. On account of the different models, it

is possible that not all accessories are included in your set. These are also available separately from customer service.

Universal cutter

X Fig. A

1Container

2Blade

3Gear attachment

4Lid

If the universal cutter is not included with the hand blender, it can be ordered from customer service (order no. 657247).

3

en Universal cutter

Operation

Warning!

Always observe the maximum quantities and processing times in the table. X Fig. E

Blade: For cutting meat, hard cheese, onions, herbs, garlic, fruit, vegetables, nuts and almonds.

Warning!

––The universal cutter must be completely assembled before use!

––Before cutting meat, remove gristle, bones and sinews.

––The universal cutter is not suitable for cutting very hard items (coffee beans, radishes, nutmeg) and frozen food (fruit, etc.).

X Fig. B

1.Place the container on a smooth, clean work surface and press into position.

Insert the universal blade. Important: The blade must be positioned straight in the container.

2.Add food.

3.Place the gear attachment on the container and rotate clockwise until it clicks into position.

4.Place the base unit on the gear attachment and press until it clicks into position.

5.Plug the mains plug into the mains.

6.Hold the base unit and universal cutter firmly. Press the Turbo button Â.

The appliance remains switched on as long as the button is pressed.

7.Release the button when the desired consistency is reached. Wait until the drive comes to a standstill.

After using the appliance

8.Disconnect the mains plug.

9.Hold down both release buttons and remove the base unit.

10.Rotate the gear attachment anticlockwise and remove.

11.Take hold of the blade by the plastic handle and take out.

12.Empty the container.

■■ Clean all parts immediately after use.

X Fig. D

Cleaning

WWRisk of injury

Do not touch the blades of the universal cutter / ice crusher with bare hands. To clean, only grasp by the plastic and use a brush.

Warning!

Never immerse the gear attachment in liquids and do not clean under running water or in the dishwasher.

■■ Universal cutter and blade are dishwasher-safe.

■■ Wipe the attachment with a damp cloth only.

Sample recipe:

Honey cake with apples

Honey-apple mixture (CNHR24):

––110 g forest honey (5 °C)

––30 g apple in cubes (11 mm)

■■ Put in universal cutter and mix on Turbo speed for 2 seconds.

Honey-apple mixture (CNHR25, CNHR26, CNHR26C):

––130 g forest honey (5 °C)

––30 g apple in cubes (11 mm)

■■ Put in universal cutter and mix on Turbo speed for 2 seconds.

4

Cake:

––3 eggs

––60 g butter

––100 g plain white flour

––60 g ground walnuts

––1 tsp cinnamon

––2 packets vanilla sugar

––1 tsp baking powder

––1 apple

■■ Separate the egg yolks from the whites. ■■ Beat the egg whites until stiff.

■■ Beat the yolks and sugar, then add the softened butter and the honey-apple mixture.

■■ Mix the flour, ground walnuts, cinnamon and baking powder in a separate bowl. Add to the moist ingredients and mix in. Using a spatula carefully fold in the beaten egg whites.

■■ Line a bread baking pan (dimensions 35 cm x 11 cm) with baking paper and pour in the prepared mixture.

■■ Peel the apple and slice. Arrange the slices on the cake.

■■ Preheat the oven to 180 °C and bake the cake for 30 minutes.

Whisk

X Fig. A

5Gear attachment

6Whisk

If the whisk is not included with the hand blender, it can be ordered from customer service (order no. 657379).

Operation

For whipping cream, beating egg whites and milk froth from hot (max. 70°C) and cold milk (max. 8°C) as well as for preparing sauces and desserts.

WWRisk of scalding!

When processing hot milk, use a tall, narrow receptacle for blending. Hot milk may splash and scald you.

X Fig. C

1.Put the food in the blender jug.

2.Place the gear attachment on the base unit and lock into position.

Whisk en

3.Insert the whisk into the gear attachment and lock into position.

Warning!

Never insert the whisk into the base unit without the gear attachment.

4.Connect the mains plug.

5.Set the required speed with the speed control (high speed recommended)

6.Take hold of the base unit and blender jug and press the ON button Ã.

7.Release the ON button after processing.

After using the appliance

8.Disconnect the mains plug.

9.Hold down both release buttons and remove the whisk with the gear attachment from the base unit.

10.Remove the whisk from the gear

attachment.

■■ Clean all parts immediately after use.

X Fig. D

Cleaning

Warning!

Never immerse the gear attachment in water and do not clean under running water or in the dishwasher.

■■ The whisk can be cleaned in the dishwasher, but wipe the gear attachment with a damp cloth only.

Changes reserved.

5