Bosch ISN-CSD80-W, ISN-CSD70-W Specsheet
Intrusion Alarm Systems | ISN‑CSD70 and ISN‑CSD80 Compact Contacts
ISN‑CSD70 and ISN‑CSD80
Compact Contacts
www.boschsecurity.com
u Closed loop
u Sensitive non-stick rhodium reed
The contacts are available in brown or white. All
models have a rugged, one-piece construction that
eliminates the need for extra donut adapters. The
compact (stubby) design allows you to use the contact
in smaller spaces, without paying for a miniature
design. Use on steel doors in standard or tight-fitting
applications.
Notice
The photograph shows model ISN-CSD80-W.
Certifications and approvals
UL and
u Bent long leads keep solder off the glass of the reed
u Two solder points on the wire
u Thick plastic shell resists crushing
Region
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
USA UL cULus: AMQV: Connectors and Switches
Certification
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
(UL 634), AMQV7: Connectors and
Switches Certified for Canada (ULC/
ORD-C634) [-CSD70 Series]
UL cULus: AMQV: Connectors and Switches
(UL 634), AMQV7: Connectors and
Switches Certified for Canada (ULC/
ORD-C634) [-CSD80 Series]
Installation/configuration notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts included
Quantity Per Package Component
10 Contacts
10 Magnets
2 | ISN‑CSD70 and ISN‑CSD80 Compact Contacts
Technical specifications
Specifications for All Models
Gap Width: 38 mm (1.5 in.)
Wire Lead Type: 0.8 mm (0.029 in.) 22 AWG, 7
stranded
Wire Lead Length: 46 cm (18 in.) standard leads
Switch Configuration Type: Single pole single throw (SPST)
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to
-140°F)
Specifications for ISN-CSD70-B/W Models
Contact Dimensions: 19 mm x 20.3 mm
(0.75 in. x 0.80 in.)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 1010 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
White Compact Contact with Standard Magnet (25 mm)
White recessed contact with 25 mm (1 in.) diameter.
Includes standard magnet. Package contains ten
contacts and ten magnets.
Order number ISN-CSD80-W
Maximum Voltage: 100 V
Specifications for ISN-CSD80-B/W Models
Contact Dimensions: 25 mm x 20 mm (1 in. x 0.80 in.)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 1010 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Package Information
ATTENTION! Each package contains ten contacts and ten magnets.
Ordering information
Brown Compact Contact with Standard Magnet (19 mm)
Brown recessed contact with 19 mm (0.75 in.)
diameter. Includes a standard magnet. Package
contains ten contacts and ten magnets.
Order number ISN-CSD70-B
White Compact Contact with Standard Magnet (19 mm)
White recessed contact with 19 mm (0.75 in.)
diameter. Includes a standard magnet. Package
contains ten contacts and ten magnets.
Order number ISN-CSD70-W
Loading...