Bosch GBH 2-23 RE User Manual

OBJ_DOKU-22784-005.fm Page 1 Tuesday, October 17, 2017 2:03 PM

Robert Bosch Power Tools GmbH

70538 Stuttgart

GERMANY

www.bosch-pt.com

1 609 92A 40R (2017.10) O / 46

	r
	e
Boschhamm

GBH Professional

2-23 S | 2-23 E | 2-23 RE

en Original instructions cn tw

ko

th id Petunjuk-Petunjuk untuk

Penggunaan Orisinal

vi Bản gốc hướng dẫn sử dụng

OBJ_BUCH-1281-005.book Page 2 Tuesday, October 17, 2017 2:10 PM

2 |

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . Page 5
. . . . . . . . . . . . . . . . . . . .	. .	12
. . . . . . . . . . . . . . . . . . . .	. .	17
. . . . . . . . . . . . . . . . . . . . . . . .	22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Bahasa Indonesia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 32

Tiếng Việt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 38

	1 609 92A 40R | (17.10.17)				Bosch Power Tools

OBJ_BUCH-1281-005.book Page 3 Tuesday, October 17, 2017 2:10 PM

| 3

3

1 2

GBH 2-23 RE

A

	r
	mme
a
hh
Bosc

4

Boschhammer

5

6

	7
	8
	9
10
11	12
	11
B	10
	1

X

11

9

Bosch Power Tools

1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 4 Tuesday, October 17, 2017 2:10 PM

4 |

C 15 D

14

13

Bo

E

G

3

X

F		r
		mme
		schha
	o
	B

	11 9
	16
H	B
	o

17

18

19

20

21

22

1 609 92A 40R | (17.10.17)

Bosch Power Tools

OBJ_BUCH-1281-005.book Page 5 Tuesday, October 17, 2017 2:10 PM

English

Safety Notes

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

English | 5

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

	Bosch Power Tools				1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 6 Tuesday, October 17, 2017 2:10 PM

6 | English

Hammer Safety Warnings

Wear ear protectors. Exposure to noise can cause hearing loss.

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

Hold the tool by the insulated gripping surfaces when performing operations where the application tool or the screw could contact hidden wiring or its own power cord. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and shock the operator.

Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock.

When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands.

Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.

Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Product Description and

Specifications

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Intended Use

The machine is intended for hammer drilling in concrete, brick and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the illustration of the machine on the graphics page.

1 SDS-plus tool holder

2 Dust protection cap

3 Locking sleeve

4 Rotational direction switch (GBH 2-23 RE)

5 Lock-on button for On/Off switch

6 On/Off switch

7Release button for drilling/hammer drilling selector switch

8 Selector switch for drilling/hammer drilling

9 Button for depth stop adjustment

10Depth stop

11Auxiliary handle (insulated gripping surface)

12Handle (insulated gripping surface)

13Securing screw for key type drill chuck*

14Key type drill chuck*

15SDS-plus adapter shank for drill chuck*

16Extraction sleeve of the dust extraction attachment*

17Clamping screw for the dust extraction attachment*

18Depth stop of the dust extraction attachment*

19Telescopic pipe of the dust extraction attachment*

20Wing bolt of the dust extraction attachment*

21Guide pipe of the dust extraction attachment*

22Universal bit holder with SDS-plus shank*

*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.

Technical Data

Rotary Hammer		GBH 2-23 S	GBH 2-23 E	GBH 2-23 RE
Article number		3 611 B50 2..	3 611 B50 8..	3 611 B50 4..
Speed control		–		
Right/left rotation		–	–	
Rated power input	W	650	650	650
Impact rate	min-1	4400	0–4400	0–4400
Impact energy per stroke according to
EPTA-Procedure 05/2009	J	2.5	2.5	2.5

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

	1 609 92A 40R | (17.10.17)				Bosch Power Tools

OBJ_BUCH-1281-005.book Page 7 Tuesday, October 17, 2017 2:10 PM

				English | 7
Rotary Hammer		GBH 2-23 S	GBH 2-23 E	GBH 2-23 RE
Rated speed	min-1	1000	0–1000	0–1000
Tool holder		SDS-plus	SDS-plus	SDS-plus
Spindle collar diameter	mm	43	43	43
		(Euro-Norm)	(Euro-Norm)	(Euro-Norm)
Hammer Drilling				
Drilling				
Drilling diameter, max.:
– Concrete	mm	23	23	23
– Brickwork (with core bit)	mm	68	68	68
– Steel	mm	13	13	13
– Wood	mm	30	30	30
Weight according to EPTA-Procedure	kg	2.3	2.3	2.3
01:2014
Protection class		/II	/II	/II

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Assembly

Before any work on the machine itself, pull the mains plug.

Changing the Key Type Drill Chuck

To work with tools without SDS-plus (e. g., drills with cylindrical shank), a suitable drill chuck must be mounted (key type drill chuck or keyless chuck, accessories).

Auxiliary Handle

Operate your machine only with the auxiliary handle 11.

Changing the position of the auxiliary handle (see figure A)

The auxiliary handle 11 can be set to any position for a secure and low-fatigue working posture.

–Turn the bottom part of the auxiliary handle 11 in counterclockwise direction and swivel the auxiliary handle 11 to the desired position. Then retighten the bottom part of the auxiliary handle 11 by turning in clockwise direction.

Adjusting the Drilling Depth (see figure B)

The required drilling depth X can be set with the depth stop

10.

–Press the button for the depth stop adjustment 9 and insert the depth stop into the auxiliary handle 11.

–The knurled surface of the depth stop 10 must face downward.

–Insert the SDS-plus drilling tool to the stop into the SDSplus tool holder 1. Otherwise, the movability of the SDSplus drilling tool can lead to incorrect adjustment of the drilling depth.

–Pull out the depth stop until the distance between the tip of the drill bit and the tip of the depth stop corresponds with the desired drilling depth X.

Selecting Drill Chucks and Tools

For hammer drilling and chiselling (chiselling only with

MV 200 accessory), SDS-plus tools are required that are inserted in the SDS-plus drill chuck.

For drilling without impact in wood, metal, ceramic and plastic as well as for screwdriving, tools without SDS-plus are used (e.g., drill bits with cylindrical shank). For these tools, a keyless chuck or a key type drill chuck are required.

Mounting the Key Type Drill Chuck (see figure C)

–Screw the SDS-plus adapter shank 15 into a key type drill chuck 14. Secure the key type drill chuck 14 with the securing screw 13. Please observe that the securing screw has a left-hand thread.

Inserting the Key Type Drill Chuck (see figure C)

–Clean the shank end of the adapter shank and apply a light coat of grease.

–Insert the key type drill chuck with the adapter shank into the tool holder with a turning motion until it automatically locks.

–Check the locking effect by pulling the key type drill chuck.

Removing the Key Type Drill Chuck

–Push the locking sleeve 3 toward the rear and pull out the key type drill chuck 14.

Changing the Tool

The dust protection cap 2 largely prevents the entry of drilling dust into the tool holder during operation. When inserting the tool, take care that the dust protection cap 2 is not damaged.

A damaged dust protection cap should be changed immediately. We recommend having this carried out by an after-sales service.

Inserting SDS-plus Drilling Tools (see figure D)

The SDS-plus drill chuck allows for simple and convenient changing of drilling tools without the use of additional tools.

–Clean and lightly grease the shank end of the tool.

–Insert the tool in a twisting manner into the tool holder until it latches itself.

–Check the latching by pulling the tool.

	Bosch Power Tools				1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 8 Tuesday, October 17, 2017 2:10 PM

8 | English

As a requirement of the system, the SDS-plus drilling tool can move freely. This causes a certain radial run-out at no-load, which has no effect on the accuracy of the drill hole, as the drill bit centres itself upon drilling.

Removing SDS-plus Drilling Tools (see figure E)

– Push back the locking sleeve 3 and remove the tool.

Inserting Drilling Tools without SDS-plus

Note: Do not use tools without SDS-plus for hammer drilling! Tools without SDS-plus and their drill chucks are damaged by hammer drilling.

–Insert a key type drill chuck 14 (see “Changing the Key Type Drill Chuck”, page 7).

–Open the key type drill chuck 14 by turning until the tool can be inserted. Insert the tool.

–Insert the chuck key into the corresponding holes of the key type drill chuck 14 and clamp the tool uniformly.

–Set the selector switch 8 to the “Drilling” symbol.

Removing Drilling Tools without SDS-plus

–Turn the sleeve of the key type drill chuck 14 with the drill chuck key in anticlockwise direction until the drilling tool can be removed.

Dust Extraction with the Dust Extraction Attachment (Accessory)

Dust from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dust can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.

Certain dust, such as oak or beech dust, is considered carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Materials containing asbestos may only be worked by specialists.

–As far as possible, use a dust extraction system suitable for the material.

–Provide for good ventilation of the working place.

–It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the materials to be worked.

Prevent dust accumulation at the workplace. Dust can easily ignite.

Mounting the Dust Extraction Attachment (see figure F)

For dust extraction, the dust extraction attachment (accessory) is required. When drilling, the dust extraction attachment retracts so that the attachment head is always close to the surface at the drill hole.

–Press the button for depth stop adjustment 9 and remove the depth stop 10. Press button 9 again and insert the dust extraction attachment into the auxiliary handle 11 from the front.

–Connect an extraction hose (diameter 19 mm, accessory) to the extraction sleeve 16 of the dust extraction attachment.

The vacuum cleaner must be suitable for the material being worked.

When vacuuming dry dust that is especially detrimental to health or carcinogenic, use a special vacuum cleaner.

Adjusting the Drilling Depth on the Dust Extraction Attachment (see figure G)

The required drilling depth X can also be adjusted when the dust extraction attachment is mounted.

–Insert the SDS-plus drilling tool to the stop into the SDSplus tool holder 1. Otherwise, the movability of the SDSplus drilling tool can lead to incorrect adjustment of the drilling depth.

–Loosen the wing bolt 20 on the dust extraction attachment.

–Without switching the power tool on, apply it firmly to the drilling location. The SDS-plus drilling tool must face against the surface.

–Position the the guide pipe 21 of the dust extraction attachment in its holding fixture in such a manner that the head of the dust extraction attachment faces against the surface to be drilled. Do not slide the guide pipe 21 further over the telescopic pipe 19 of the dust extraction attachment than required, so that as much as possible of the scale 19 on the telescopic pipe remains visible.

–Retighten the wing bolt 20 again. Loosen the clamping screw 17 on the depth stop of the dust extraction attachment.

–Move the depth stop 18 on the telescopic pipe 19 in such a manner that the clearance X shown in the figure corresponds with the required drilling depth.

–Tighten the clamping screw 17 in this position.

Operation

Starting Operation

Observe correct mains voltage! The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V.

Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less.

Setting the operating mode

With the selector switch for drilling/hammer drilling 8, the operating mode of the machine is selected.

Note: Change the operating mode only when the machine is switched off! Otherwise, the machine can be damaged.

–To change the operating mode, press the release button 7 and turn the drilling/hammer drilling selector switch 8 to the desired position until it can be heard to latch.

Position for hammer drilling in concrete or stone as well as for chiselling (chiselling only with the MV 200 accessory)

Position for drilling without impact in wood, metal, ceramic and plastic as well as for screwdriving and thread cutting

	1 609 92A 40R | (17.10.17)				Bosch Power Tools

OBJ_BUCH-1281-005.book Page 9 Tuesday, October 17, 2017 2:10 PM

Reversing the rotational direction (GBH 2-23 RE)

The rotational direction switch 4 is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch 6 actuated.

Right rotation: Turn the selector switch for drilling/ hammer drilling 4 on both sides to the stop in the position .

Left rotation: Turn the selector switch for drilling/ hammer drilling 4 on both sides to the stop in the position .

Set the direction of rotation for hammer drilling, drilling and chiselling always to right rotation.

Switching On and Off

–To start the machine, press the On/Off switch 6.

–To lock the On/Off switch, keep it pressed and additionally push the lock-on button 5.

–To switch off the machine, release the On/Off switch 6. When the On/Off switch 6 is locked, press it first and then release it.

Setting the Speed/Impact Rate (GBH 2-23 E/RE)

The speed/impact rate of the switched on power tool can be variably adjusted, depending on how far the On/Off switch 6 is pressed.

Light pressure on the On/Off switch 6 results in low speed/impact rate. Further pressure on the switch increases the speed/impact rate.

Overload Clutch

If the tool insert becomes caught or jammed, the drive to the drill spindle is interrupted. Because of the forces that occur, always hold the power tool firmly with both hands and provide for a secure stance.

If the power tool jams, switch the machine off and loosen the tool insert. When switching the machine on with the drilling tool jammed, high reaction torques can occur.

Working Advice

Before any work on the machine itself, pull the mains plug.

Chiselling

For chiselling, a MV 200 SDS-plus chiselling attachment (accessory), which is inserted into the SDS-plus tool holder 1, is required.

Inserting Screwdriver Bits (see figure H)

Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off.

Hold the tool by the insulated gripping surfaces when performing operations where the application tool or the screw could contact hidden wiring or its own power cord. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and shock the operator.

To work with screwdriver bits, a universal bit holder 22 with SDS-plus shank (accessory) is required.

English | 9

–Clean the shank end of the adapter shank and apply a light coat of grease.

–Insert the universal bit holder with a turning motion into the tool holder until it automatically locks.

–Check the locking effect by pulling the universal bit holder.

–Insert a screwdriver bit into the universal bit holder. Use only screwdriver bits that match the screw head.

–To remove the universal bit holder, pull the locking sleeve 3 toward the rear and remove the universal bit holder 22 out of the tool holder.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull the mains plug.

For safe and proper working, always keep the machine and ventilation slots clean.

A damaged dust protection cap should be changed immediately. We recommend having this carried out by an after-sales service.

– Clean the tool holder 1 each time after using.

If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions concerning our products and their accessories.

In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of the product.

Cambodia

Robert Bosch (Cambodia) Co., Ltd

Unit 8BC, GT Tower, 08th Floor, Street 169,

Czechoslovakia Blvd, Sangkat Veal Vong

Khan 7 Makara, Phnom Penh

VAT TIN: 100 169 511

Tel.: [phone]

Tel.: [phone]

www.bosch.com.kh

People’s Republic of China China Mainland

Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road

Bin Jiang District 310052 Hangzhou, P.R. China Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.cn

	Bosch Power Tools				1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 10 Tuesday, October 17, 2017 2:10 PM

10 | English

HK and Macau Special Administrative Regions

Robert Bosch Co. Ltd.

21st Floor, 625 King’s Road North Point, Hong Kong

Customer Service Hotline: [phone] Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.hk

India

Bosch Service Center

69, Habibullah Road, (Next to PSBB School), T. Nagar Chennai–600077

Phone: [phone]

Bosch Service Center Rishyamook

85A, Panchkuin Road

New Delhi–110001

Phone: [phone]

Bosch Service Center

79, Crystal Bldg., Dr. Annie Besant Road, Worli Mumbai–400018

Phone: [phone]

Indonesia

PT Robert Bosch

Palma Tower 10th Floor

Jalan RA Kartini II-S Kaveling 6

Pondok Pinang, Kebayoran Lama

Jakarta Selatan 12310

Tel.: [phone]

www.bosch-pt.co.id

Malaysia

Robert Bosch Sdn. Bhd.(220975-V) PT/SMY No. 8A, Jalan 13/6

46200 Petaling Jaya Selangor

Tel.: [phone] Toll-Free: 1800 880188 Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.my

Pakistan

Robert Bosch Middle East FZE – Pakistan Liaison Office 2nd Floor Plaza # 10, CCA Block, DHA Phase 5 Lahore, 54810

Phone: [phone] Email: [e-mail]

Philippines

Robert Bosch, Inc.

28th Floor Fort Legend Towers, 3rd Avenue corner 31st Street, Fort Bonifacio, Global City, 1634 Taguig City

Tel.: [phone]

Fax: [phone] www.bosch-pt.com.ph

Singapore

Powerwell Service Centre Ptd Ltd

Bosch Authorised Service Centre (Power Tools) 4012 Ang Mo Kio Ave 10, #01-02 TECHplace Singapore 569628

Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail] www.powerwellsc.com www.bosch-pt.com.sg

Thailand

Robert Bosch Ltd.

Liberty Square Building

No. 287, 11 Floor

Silom Road, Bangrak

Bangkok 10500

Tel.: [phone]

Fax: [phone]

Robert Bosch Ltd., P. O. Box 2054

Bangkok 10501

www.bosch.co.th

Bosch Service – Training Centre

La Salle Tower Ground Floor Unit No.2

10/11 La Salle Moo 16

Srinakharin Road

Bangkaew, Bang Plee

Samutprakarn 10540

Tel.: [phone]

Fax: [phone]

Vietnam

Branch of Bosch Vietnam Co., Ltd in HCMC Floor 10, 194 Golden Building

473 Dien Bien Phu Street

Ward 25, Binh Thanh District, Ho Chi Minh City Tel.: [phone]

Fax: [phone] Hotline: [phone] www.bosch-pt.com.vn

Armenia, Azerbaijan, Georgia, Kyrgyzstan, Mongolia, Tajikistan, Turkmenistan, Uzbekistan

TOO “Robert Bosch” Power Tools, After Sales Service Rayimbek Ave., 169/1

050050, Almaty, Kazakhstan

Service Email: [e-mail]

Official Website: www.bosch.com, www.bosch-pt.com

Bahrain

Hatem Al Juffali Technical Equipment Establishment. Kingdom of Bahrain, Setra Highway, Al Aker Area Phone: [phone]

Fax: [phone]

Email: [e-mail]

	1 609 92A 40R | (17.10.17)				Bosch Power Tools

OBJ_BUCH-1281-005.book Page 11 Tuesday, October 17, 2017 2:10 PM

Egypt

Unimar

20 Markaz kadmat

El tagmoa EL Aoul – New Cairo Phone: [phone] Phone: [phone] Fax: [phone]

Email: [e-mail]

Iran

Robert Bosch Iran

3rd Floor, No 3, Maadiran Building Aftab St., Khodami St., Vanak Sq. Tehran 1994834571

Phone: [phone]

Iraq

Sahba Technology Group

Al Muthana airport road

Baghdad

Phone: [phone]

Phone Dubai: [phone]

Email: [e-mail]

Jordan

Roots Arabia – Jordan

Nasser Bin Jameel street, Building 37 Al Rabiah 11194 Amman

Phone: [phone] Email: [e-mail]

Kuwait

Al Qurain Automotive Trading Company

Shuwaikh Industrial Area, Block 1, Plot 16, Street 3rd P.O. Box 164 – Safat 13002

Phone: [phone] Fax: [phone]

E-mail: [e-mail]

Lebanon

Tehini Hana & Co. S.A.R.L.

P.O. Box 90-449

Jdeideh

Dora-Beirut

Phone: [phone]

Email: [e-mail]

Libya

El Naser for Workshop Tools

Swanee Road, Alfalah Area

Tripoli

Phone: [phone]

Oman

Malatan Trading & Contracting LLC

P.O. Box 131

Ruwi, 112 Sultanate of Oman

Phone: [phone]

Email: [e-mail]

English | 11

Qatar

International Construction Solutions W L L

P. O. Box 51, Doha

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Saudi Arabia

Juffali Technical Equipment Co. (JTECO)

Kilo 14, Madinah Road, Al Bawadi District

Jeddah 21431

Phone: [phone] Ext. 1528

Fax: [phone]

Email: [e-mail]

Syria

Dallal Establishment for Power Tools

P.O. Box 1030

Aleppo

Phone: [phone]

Email: [e-mail]

United Arab Emirates

Central Motors & Equipment LLC, P.O. Box 1984 Al-Wahda Street – Old Sana Building

Sharjah

Phone: [phone] Fax: [phone]

Email: [e-mail]

Yemen

Abualrejal Trading Corporation

Sana’a Zubiery St. Front to new Parliament Building Phone: [phone]

Fax: [phone]

Email: [e-mail]

Ethiopia

Forever plc

Kebele 2,754, BP 4806,

Addis Ababa

Phone: [phone]

Email: [e-mail]

Ghana

C.WOERMANN LTD.

Nsawam Road/Avenor Junction, P.O. Box 1779

Accra

Phone: [phone]

Kenya

Robert Bosch East Africa Ltd

Mpaka Road P.O. Box 856

00606 Nairobi

Nigeria

Robert Bosch Nigeria Ltd.

52–54 Isaac John Street P.O. Box

GRA Ikeja – Lagos

Republic of South Africa

Customer service

Hotline: [phone]

	Bosch Power Tools				1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 12 Tuesday, October 17, 2017 2:10 PM

12 |

Gauteng – BSC Service Centre

35 Roper Street, New Centre Johannesburg

Tel.: [phone]

Fax: [phone] E-Mail: [e-mail]

KZN – BSC Service Centre

Unit E, Almar Centre

143 Crompton Street Pinetown

Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail]

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

Milnerton

Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail]

Bosch Headquarters

Midrand, Gauteng

Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail]

Tanzania

Diesel & Autoelectric Service Ltd.

117 Nyerere Rd., P.O. Box 70839

Vingunguti 12109, Dar Es Salaam

Phone: [phone]

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: [phone]

Fax: [phone]

Inside New Zealand:

Phone: [phone]

Fax: [phone]

Outside AU and NZ:

Phone: [phone]

www.bosch-pt.com.au

www.bosch-pt.co.nz

Disposal

The machine, accessories and packaging should be sorted for environmental-friendly recycling.

Do not dispose of power tools into household waste!

Subject to change without notice.

!

" "

 发事故。

 尘或气体。

 中会使操作者失去对工具的控制。

险。

 如果你身体接地会增加电击危险。

 电动工具将增加电击危险。

部件。

 接软线。

 使用剩余电流动作保护器RCD RCD

 瞬间的疏忽会导致严重人身伤害。

 诸如适当条件下使用防尘面具、防滑安全鞋、安全 帽、听力防护等装置能减少人身伤害。

/

	1 609 92A 40R | (17.10.17)				Bosch Power Tools

OBJ_BUCH-1281-005.book Page 13 Tuesday, October 17, 2017 2:10 PM

| 13

 可能会卷入运动部件中。

 尘屑引起的危险。

 更安全。

 且必须进行修理。

 必须从电源上拔掉插头和/

 稳固。

 比用手持握工件更牢固。

 工具。

火灾并且/

和正逆转功能的

 事故由维护不良的电动工具引发。

 刃的刀具不易卡住而且容易控制。

 于那些与其用途不符的操作可能会导致危险。

 性。

 伤害。

 碰到带电导线会使工具外露的金属零件带电从而使 操作者受到电击。

 的相关单位寻求支援。

1 SDS- plus

2

3

4 (GBH 2- 23 RE)

5

6

7 " / "

8 " / "

9

13*

14*

15SDS- plus *

16Saugfix *

17Saugfix *

18Saugfix *

19Saugfix *

20Saugfix *

21Saugfix *

22SDS- plus *

*

	Bosch Power Tools				1 609 92A 40R | (17.10.17)

OBJ_BUCH-1281-005.book Page 14 Tuesday, October 17, 2017 2:10 PM

	14 |
			GBH 2-23 S	GBH 2-23 E	GBH 2-23 RE
			3 611 B50 2..	3 611 B50 8..	3 611 B50 4..
			–		
	/		–	–	
			650	650	650
		/	4400	0–4400	0–4400
	EPTA-Procedure
	05/2009		2,5	2,5	2,5
		/	1000	0–1000	0–1000
			SDS-plus	SDS-plus	SDS-plus
			43	43	43
					
					
	–		23	23	23
	–
			68	68	68
	–
			13	13	13
	–		30	30	30
	EPTA-Procedure 01:2014		2,3	2,3	2,3
			/II	/II	/II

230 V

 拔出插头。

 11

A

11

–11 1111

B

10 X

–911

–10

–SDS- plus SDS- plus1

– 必须和需要的钻深X

MV 200SDS-plusSDS-plus

SDS-plus

SDS- plus

C

–SDS-plus 1514 13 14

C

– 头柄自动锁定为止。

	1 609 92A 40R | (17.10.17)				Bosch Power Tools