Bosch FLM-325-2I4 Specsheet

Fire Alarm Systems | FLM‑325‑2I4 Dual Input Monitor

FLM‑325‑2I4 Dual Input Monitor

www.boschsecurity.com

u Two independent contact monitoring circuits

u Monitors Normally Open (NO) or Normally

Closed (NC) contacts

u Monitored Normally Open (NO) contacts can be

configured with or without EOL resistor

The FLM‑325‑2I4 Dual Input Monitor Module provides
two independent contact monitoring circuits while
only utilizing one address on the SLC loop. The
module can be programmed to monitor Normally Open
(NO) or Normally Closed (NC) dry contact types of fire
alarm and supervisory devices such as pull stations or
water flow devices.
It fits into a standard 4‑inch square or double‑gang
electrical back box.

Functions

Status display

The DIMM has a bi‑colored LED that flashes every time
the module is polled and can be switched on steady
when the module goes into active condition.

Certifications and approvals

Region Certification

USA UL UOXX: Control Unit Accessories, System

(ANSI/UL 864)

CSFM see our website

FDNY-

#6101

CoA

u Module address programming with the D5070

Analog Device Programmer between 1‑127

u Bicolored LED provides module status

Installation/configuration notes

Compatibility Information

The following products are compatible with the
FLM‑325‑2I4 Dual Input Monitor Module:

Category Product ID Product Description

Fire Panels FPA‑1000 Analog Addressable Fire Panels

Programmer D5070 Analog Device Programmer

Wiring

Install the FLM‑325‑2I4 Dual Input Monitor Module
with the following maximum distances to the EOL
resistor depending on the wirings:

Wirings Distances

14 AWG (ISO 2.5 mm2) 1500 ft (457 m)

16 AWG (ISO 1.5 mm2) 900 ft (274 m)

18 AWG (ISO 0.75 mm2) 550 ft (167 m)

Parts included

Quant. Component

1 FLM‑325‑2I4 Dual Input Monitor Module

2 | FLM‑325‑2I4 Dual Input Monitor

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice
2690678027 | en, V6, 24. Jul 2014

2 EOL resistor 22 kΩ

1 Wall plate

1 Literature pack

Technical specifications

Electrical

Operating Voltage 17 VDC to 41 VDC

Current Consumption

• Standby 0.6 mA

• Active (without LED) 0.6 mA

• Active (LED on) 30 mA

Mechanical

Dimensions (H x W x D) 4.7 in. x 4.2 in. x 1.4 in.

(11.9 cm x 10.7 cm x 3.6 cm)

Bicolored LED Red and green

Environmental

Operating Temperature +32°F to +120°F (0°C to +49°C)

Relative Humidity 90 %, non‑condensing

Ordering information

FLM‑325‑2I4 Dual Input Monitor

Provides two independent contact monitoring circuits
to monitor Normally Open (NO) or Normally Closed
(NC) dry contact types of fire alarm devices

Order number FLM-325-2I4