Bosch FLEXIDOME multi 7000i, NDM-7702-A, NDM-7703-A Installation manual

FLEXIDOME multi 7000i

NDM‑7702‑A | NDM‑7703‑A

Installation manual

FLEXIDOME multi 7000i Table of contents | en 3

Safety 5

1.1 Safety message explanation 5

1.2 Safety precautions 5

1.3 Important safety instructions 5

1.4 Notices 6 2

Short information 7

System overview 8

3.1 Product description 8

3.2 Intended use 9

3.3 Using the camera 9

3.4 Operation with external systems 9 4

Planning information 10

4.1 Unpacking 10

4.2 Parts included 10

4.3 Preparation 11

4.4 Network and PoE+ 11 5

Installation 12

5.1 Installing the mounting plate 12

5.1.1 Installing the mounting plate without conduit 13

5.1.2 Installing the mounting plate with conduit (NDA-7051-CA) 13

5.2 Installing the camera base 15

5.2.1 Before the installation 15

5.2.2 Installation steps 16

5.2.3 Wiring the camera base 20

5.2.4 Connecting a wireless USB dongle 22

5.3 Setting the position of each of the four lenses 22

5.3.1 Panning each of the four lenses over the ring 23

5.3.2 Tilting each of the four lenses 23

5.3.3 Rotating each of the four lenses 24

5.3.4 Rolling each of the four lenses 25

5.4 Installing the camera dome cover 25

5.5 Optional mounting accessories 26 6

Configuration 30

6.1 Bosch Project Assistant 30

6.2 Browser connection 30

6.2.1 Establishing the network 30

6.2.2 Protected network 30

6.3 Bosch Video Client 30

6.4 Video Security Client 31 7

Troubleshooting 32

7.1 Resolving problems 32

7.2 Testing the network 32

7.3 Customer service 33 8

Maintenance 34

8.1 Cleaning 34

8.2 Repair 34

8.3 Reset 34 9

Decommissioning 36

Bosch Security Systems B.V.

Installation manual

2021-03 | 01 |

4 en | Table of contents FLEXIDOME multi 7000i

9.1 Transfer 36

9.2 Disposal 36 10

Technical data 37

10.1 Dimensions 37

10.2 Specifications 37

2021-03 | 01 |

Installation manual

Bosch Security Systems B.V.

FLEXIDOME multi 7000i Safety | en 5

1 Safety

Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device.

1.1 Safety message explanation

In this manual, the following symbols and notations are used to draw attention to special situations:

Danger!

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Warning!

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Caution!

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in damage to the equipment or environment, or data loss.

1.2 Safety precautions

Caution!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code (NEC800 CECSection60) or applicable local codes.

1.3 Important safety instructions

– To clean the device, do not use liquid cleaners or aerosol cleaners. – Do not install the device near any heat sources such as radiators, heaters, stoves, or

other equipment (including amplifiers) that produce heat. – Do not spill liquids on the device before installation is completed. – Take precautions to protect the device from power and lightning surges. – Adjust only those controls specified in the operating instructions. – Operate the device only from the type of power source indicated on the label. – Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing

to qualified service personnel. – Install in accordance with the manufacturer's instructions in accordance with applicable

local codes. – Use only attachments/accessories specified by the manufacturer. – Protect all connection cables from possible damage, particularly at connection points.

Bosch Security Systems B.V.

Installation manual

2021-03 | 01 |

6 en | Safety FLEXIDOME multi 7000i

1.4 Notices

UL Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in Standard(s) for Safety for Information Technology Equipment, UL 60950-1, UL 62368-1, UL 60950-22. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.

FCC statement (USA)

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: – This device may not cause harmful interference. – This device must accept any interference received, including interference that may

cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

2021-03 | 01 |

FCC suppliers Declaration of Conformity

FLEXIDOME multi 7000i: NDM-7702-A, NDM-7703-A

Responsible party

Bosch Security Systems Inc 130 Perinton Parkway 14450 Fairport, NY, USA

www.boschsecurity.us

IC statement (Canada)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Installation manual

Bosch Security Systems B.V.

FLEXIDOME multi 7000i Short information | en 7

2 Short information

This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was correct at the time of publication, however, the content can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between this manual and the product described.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

More information

For more information please contact the nearest Bosch Security Systems location or visit

www.boschsecurity.com.

https://www.boschsecurity.com/xc/en/product-catalog/

Bosch Security Systems B.V.

Installation manual

2021-03 | 01 |

8 en | System overview FLEXIDOME multi 7000i

3 System overview

3.1 Product description

The FLEXIDOME multi 7000i camera is built for high-quality performance, featuring four independent imagers with motorized zoom/focus lenses. It helps to simplify installation and lower costs while maintaining flexibility in coverage. With four scenes simultaneously in a single camera, it is perfect for wide area coverage, traffic intersections and building corners. When the lenses are tilted at the right angle, the camera can even cover an area up to full 360°. Additionally, the zoom capability allows the camera to obtain detailed coverage for more distant areas.

Product overview

2021-03 | 01 |

1 Mounting plate 2 Reset button

3 LED 4 USB-C port

5 8-pin Audio and I/O connector 6 Microphone

7 Camera dome cover

LED overview

LED behavior Description

Red LED lights up Startup is in progress.

Red LED flashes The unit is faulty, for example following failed

firmware upload. Refer to

Green LED lights up The unit is switched on and startup is

completed.

Installation manual

Resolving problems, page 32

Bosch Security Systems B.V.

FLEXIDOME multi 7000i System overview | en 9

LED behavior Description

Green LED flashes Video connection is active.

3.2 Intended use

The camera is designed to be integrated in professional IP video surveillance solutions as a surveillance camera. Installation, commissioning and operation of the camera shall be carried out by trained professionals only. The use of surveillance cameras is restricted by national laws and regulations. Use the camera accordingly.

3.3 Using the camera

To access the features of the camera, use a web browser. The browser provides live viewing of the camera streams in the interface window, and also allows you to access and change the extensive list of settings and parameters for camera configuration. Refer to the software manual for more information on the browser interface. The camera recording and storage functions include local alarm recording and recording to iSCSI-based systems. The camera can also use the BoschVideoRecordingManager (VRM) to control recording and storage. Integration with the many Bosch recording solutions is seamless.

3.4 Operation with external systems

The web browser is the most direct way of using the camera, however, the Bosch download store provides several other free applications (listed below) for viewing and controlling the camera.

Download store

Download the latest applications and firmware from:

http://downloadstore.boschsecurity.com/

Configuration Manager

Use the Configuration Manager application to configure general VideoClient settings like the default path for workstation recording or the use of an IntuiKey keyboard. If you decide to work with a pre-configured monitoring system, use the Configuration Manager application to set up your monitoring system: – Easily configure basic system settings with the integrated configuration wizard – Manage user groups and rights – Add devices to your system and arrange them in groups

VideoSecurityClient

The VideoSecurityClient is a free, easy-to-use video-surveillance application provided by Bosch for local and remote monitoring of IP cameras and appliances. The software supports up to 16 cameras. The VideoSecurityClient has extensive dewarping capabilities and can be used for client-side dewarping as well as for viewing the available modes.

Bosch Security Systems B.V.

BoschVideoClient

The BoschVideoClient is a free Windows application to view, operate, control, and administer surveillance cameras and installations at remote locations. It offers a user-friendly interface for easy live viewing of multiple cameras, playback, forensic search and export.

Installation manual

2021-03 | 01 |

10 en | Planning information FLEXIDOME multi 7000i

4 Planning information

4.1 Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all parts are included. If any items are missing, notify your Bosch Security Systems sales or customer service representative. The original packaging is the safest container in which to transport the unit and can be used if returning the unit for service.

4.2 Parts included

Quantity Component

1 Mounting plate

1 Camera base

1 Camera dome cover

1 TR20 Allen key

1 8-pin Audio and I/O connector

1 2-pin power connector

1 RJ-45 punch-through aid

2021-03 | 01 |

2 M20 rubber grommets

1 Quick installation guide

Installation manual

Bosch Security Systems B.V.

FLEXIDOME multi 7000i Planning information | en 11

Quantity Component

1 Safety information

3 Installer UX labels

4.3 Preparation

Before installation, prepare and plan the installation process and materials needed.

Pre-requisites

– Remove the components from the box. Make sure that all parts are included and are not

damaged.

– The necessary material and equipment:

– 4 screws M4 or M5 and mounting plugs M4 or M5 are necessary. For installation with

conduit, 5 screws M4 or M5 and mounting plugs M4 or M5 are necessary. – Appropriate size power drill. – Screwdriver and bit holder for TR20 bit, or use the provided TR20 Allen key. – Standard micro SD card (optional)

Note: Bosch recommends the use of industrial micro SD cards with health

monitoring. – Wireless USB dongle for wireless commissioning (optional) - available mid of 2021.

4.4 Network and PoE+

Notice!

Use only PoE+ IEEE 802.3at Type 2, Class 4 approved devices.

Power-over-Ethernet Plus (PoE+) can be connected at the same time as a 24VAC power supply. If auxiliary power (24VAC) and PoE+ is applied simultaneously, the camera draws its power from PoE+ by default, and seamlessly switches to auxiliary input if PoE+ fails. When PoE+ returns, the camera seamlessly switches back to PoE+ as its default power source.

Cables

For cable requirements, refer to

Wiring the camera base, page 20

Bosch Security Systems B.V.

Installation manual

2021-03 | 01 |

12 en | Installation FLEXIDOME multi 7000i

5 Installation

5.1 Installing the mounting plate

The mounting plate is used to fix the camera to a flat surface. It offers different holes and slots for a variety of fixing options.

1 PIP

Mounting holes for installation with NDA-7051-PIPW. Required screws are provided with NDA-7051-PIPW.

3 B

Mounting holes for standard wall or ceiling installation. Use four screws. If required, use plugs (for concrete walls/ceilings).

5 D

Mounting holes for single gang box. Align the two slotted holes on the mounting plate with the two screw holes in the electrical gang box.

Installation options

The camera has two configurations for surface mounting: – Refer to

the outside of the surface.

– Refer to

are on the outside of the surface.

Additionally, the camera can cover various mounting options when combined with the

2021-03 | 01 |

available accessories. Refer to accessories.

Installing the mounting plate without conduit, page 13

Installing the mounting plate with conduit (NDA-7051-CA), page 13

Optional mounting accessories, page 26

Installation manual

2 A

Mounting holes for 4in. or 4S electrical box installation. There are four mounting holes available on the mounting plate, but you need only two for the installation. You can install the mounting plate in different orientations.

4 C

Mounting holes for double gang box installation. Align the mounting plate with the four screw holes in the electrical gang box.

, if the wires are not on

, if the wires

for the available

Bosch Security Systems B.V.

FLEXIDOME multi 7000i Installation | en 13

Notice!

The plugs and screws for surface mounting are not supplied with the camera.

5.1.1 Installing the mounting plate without conduit

1. Remove the mounting plate from the box.

2. Position the mounting plate with the center hole on top of the cable exit on the surface, and mark the positions of the screw holes on the surface. For standard installation, use the mounting holes marked with a B on the mounting plate. For a different installation, for example for an installation on an electrical box, use different mounting holes. For more information, refer to

page 12

Installing the mounting plate,

3. Drill the 4 holes with the appropriate diameter drill to support your 5-6mm (0.2in.) screws and plugs.

4. Install 4 plugs in the holes.

5. Put the cable through the center hole of the mounting plate.

6. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4 and 7Nm (3 and 5.2lbfft).

5.1.2 Installing the mounting plate with conduit (NDA-7051-CA)

For installation with conduit, use the NDA-7051-CA Conduit adapter M25 (sold separately). NDA-7051-CA contains 5 conduit adapters. Use one conduit adapter per camera.

1. Remove one conduit adapter from the box.

2. Mark the position of the hole on the surface.

3. Drill the hole with the appropriate diameter drill.

4. Install a plug in the hole.

Bosch Security Systems B.V.

5. Put the cable through the hole of the conduit plate.

Installation manual

2021-03 | 01 |

14 en | Installation FLEXIDOME multi 7000i

6. Attach the conduit plate with the conduit plate adapter to the surface with a 5-6mm (0.2in.) screw.

7. Remove the mounting plate from the box.

8. Mark the positions of the holes on the surface. The mounting plate has only one side available for the conduit. Make sure to position it accordingly. For standard installation, use the mounting holes marked with a B on the mounting plate. For a different installation, for example for an installation on an electrical box, use different mounting holes. For more information, refer to

page 12

Installing the mounting plate,

9. Drill the 4 holes with the appropriate diameter drill to support your 5-6mm (0.2in.) screws and plugs.

10. Install 4 plugs in the holes.

11. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4 and 7Nm (3 and 5.2lbfft).

12. Install the conduit cover on the conduit plate with the bolt. Tighten the screw between

1.4 and 2Nm (1lbfft and 1.5lbfft) with the TR20 Allen key.

2021-03 | 01 |

Installation manual

Bosch Security Systems B.V.

+ 30 hidden pages