Bosch D7030X-S2, D7030X-S8, D7030X Specsheet

Fire Alarm Systems | D7030X LED Annunciators

D7030X LED Annunciators

www.boschsecurity.com

u Use with the FPA‑1000 Analog Addressable Fire

Panels or FPD‑7024 FACPs

u LED indicates power and trouble conditions

u LED annunciates eight individual zones expandable

to 64 zones

The D7030X LED Annunciators are used with the
FPA‑1000 Analog Addressable Fire Panels or the
FPD-7024 Fire Alarm Control Panels (FACPs). These
annunciators include the:

• D7030X that establishes the location of fire alarms for
up to eight zones

• D7030X-S2 with two of its eight LEDs dedicated to
indicating supervisory conditions

• D7030X-S8 with all eight of its LEDs dedicated to
indicating supervisory conditions

The eight zone LEDs on these annunciators can be
individually labeled for quick zone identification. Two
LEDs are labeled for power and trouble indication.
The D7032 Eight-Zone LED Annunciator Expander adds
an additional eight zones that are easily enabled by
jumper pins.
The D7030X LED Annunciator and D7032 LED
Annunciator Expander should be mounted in
entryways in plain view.

u Remote control panel reset and notification

appliance silencing capabilities

u Low profile, aesthetically appealing appearance

Certifications and approvals

Region Certification

USA UL UOJZ: Control Units, System (ANSI/UL

864) and UOXX: Control Unit Accesso­ries, System (ANSI/UL 864)

FM D7030X Family

CSFM see our website

FDNY-

#6101

CoA

FDNY-

#6173

CoA

Installation/configuration notes

Compatible Products

The following products are compatible with the
D7030X LED Annunciators:

Category Product ID Product Description

Control Panels FPA_1000-V2 Analog Addressable Fire Panel

FPA‑1000‑UL Compact Fire Panel

FPD-7024 FACP

2 | D7030X LED Annunciators

D7024 FACP

D7024-EXP FACP for export

Expander D7032 LED annunciator expander

Notice

The D7024 and D7024‑EXP are not listed under
UL864, 9th edition.

Mounting

These annunciators mount on a standard three‑gang
box.

Wiring

Wiring the annunciators to the Control Panel
Four wires connect the annunciator terminal strip to
the option bus on the control panel as a Class B
(Style 4) communication circuit.

Notice

Do not share annunciator option bus wiring with
multiplex, telephone, or notification appliance
wiring.

D7032 Wiring
When using a D7032 Remote LED Expander:

• The D7032 must be mounted in the same room as the
annunciator.

• The D7032 must be within 20 ft (6 m) of the
annunciator.

• All wiring connecting the D7032 to the annunciator
must be in conduit.

Power Requirements

Current (alarm): 255 mA maximum

(includes remote LED current).
Use 190 mA for battery calculation.

Current (standby): 45 mA maximum

(use 34 mA for battery calculation).

Voltage (operating): 12 VDC nominal

Ordering information

D7030X LED Annunciator

Eight zone LEDs indicate alarm conditions.

Order number D7030X

D7030X‑S2 LED Annunciator

Two LEDs indicate supervisory conditions; six indicate
alarm conditions.

Order number D7030X-S2

D7030X‑S8 LED Annunciator

All eight zone LEDs indicate supervisory conditions.

Order number D7030X-S8

Accessories

D7032 Eight‑zone LED Annunciator Expander

Use with D7030X LED Annunciators

Order number D7032

Notice

A wiring harness is supplied with the D7032.

Parts included

Quant. Component

1 Annunciator

1 Hardware pack

1 Literature pack

Technical specifications

Environmental Considerations

Environment: Indoor, dry

Mechanical Properties

Dimensions (HxWxD): 4.5 in. x 6.5 in. x 1.5 in.

(11.4 cm x 16.5 cm x 3.8 cm)