Bosch D6600 Specsheet

Intrusion Alarm Systems | Conettix D6600 Communications Receiver/Gateway

Conettix D6600 Communications
Receiver/Gateway

www.boschsecurity.com

u 32 lines for public switched telephone network

(PSTN) communications with Two Way audio, Caller
ID, ANI and DNIS support

The Conettix D6600 Communications Receiver/
Gateway with Conettix IP hardware components works
in the following configurations:

• Telephone line communications over the public
switched telephone network (PSTN).

• Internet or intranet communications over a LAN or
WAN using standard user datagram protocol and
internet protocol (UDP/IP).

• Simultaneous PSTN and LAN or WAN
communications.

The Conettix network environment reduces signal­reporting time, improves security, and provides instant
notification when a site experiences communication
problems. A D6600 with Conettix IP hardware is
compatible with most manufacturer’s fire and security
system control panels.

System overview

PSTN Communications Configuration

This configuration uses existing telephone lines. A
control panel's signal transmits over a PSTN analog
telephone line to the D6600. The D6600 translates the

u Award winning VOIP compensation feature reduces

signal errors caused by digitally distorted Contact ID
signals

u Up to 3200 network accounts for IPv6 and IPv4

network communications

u Supports NIST-FIPS197 certified 128 to 256 bit AES

encryption

u Designed with electrically isolated, hot-swappable

line cards and front panel access to CPU card

signal to a common data format and sends the signal
through Ethernet LAN, WAN, or RS-232 to a central
station automation system.

Internet or Intranet Communications Configuration

This configuration requires Conettix IP hardware
components, uses existing Internet or intranet
structures, and avoids additional telephone service
costs.
This configuration permits the Conettix D6200
Programming/Administration Software to connect to
the D6600 remotely. A control panel's signal transmits
over the LAN or WAN to the D6600. The D6600
translates the signal to a common data format and
sends the signal through Ethernet LAN, WAN, or
RS-232 to a central station automation system. The
central automation system sends information to
operator workstations.

Conettix D6200 Programming/Administration
Software

Conettix D6200 Programming/Administration Software
is a PC-based application that allows users to view,
change, upload, and download D6600 programming

1

2

3

4 5

4.2

5.1

5.2

5.3

6

7

8

9

10

4.3

4.1

2 | Conettix D6600 Communications Receiver/Gateway

parameters through a network connection or RS-232
serial port. Through the Conettix D6200 Programming/
Administration Software users can edit CPU and line
card parameters; view the status of all accounts in the
databases; add, edit, and delete accounts; and
configure network operations.

Notice

Conettix D6200 Programming/Administration
Software is compatible with the following
operating systems: Microsoft Windows XP,
Windows 7, Windows 8.

5.3 Conettix D6680 Ethernet Network Adapter

6. Conettix D6600 Communications Receiver/Gateway

7. RS-232

8. Conettix D6200 Programming/Administration Software

9. Automation System

10. Central Station Operators

Functions

Communication Formats

• Acron Superfast • ROBOFON

• Ademco Slow • Scantronics Scancom

• Ademco Express • SERIEE FSK/DTMF

• Ademco High Speed • Sescoa Super Speed

• Ademco Contact ID • SIA 8/20/300

• CFSK BELL/V.21 • SIA ADT

• FBI Superfast • SIA V.21

• Franklin/Sescoa • Silent Knight Fast

• ITI • Silent Knight FSK

• Radionics BFSK • Standard Pulse Formats

• Radionics Hex • Sur-Gard DTMF

• Radionics Modem II • Telim

• Radionics Modem IIe/IIIa

2

• Veritech FSK

• RB2000 • VONK

PSTN Communications

Function Benefit

Dialed number identification
service (DNIS) adjusts line card
settings according to the

Handles more field dialers with
fewer line cards and allows you to

create virtual lines.
telephone number dialed by the
control panel.

1. Access Control

2. Commercial Monitoring

3. Residential Monitoring

4. PSTN

4.1 Private Branch Exchange (PBX)

4.2 Two-way Audio

4.3 Analog Telephone Lines

5. LAN/WAN

Caller identification (Caller ID)
alarm processing stores
corresponding handshake
formats. The processing
automatically recalls the format

Shortens the amount of time that

calls are connected to the

receiver.

Decreases money spent on fixed

hardware or monthly phone bills.
when the same caller
identification is processed.

Uses the Conettix D6641
Telephone Line Card.

Digital signal processing

technology in the cards allows the

D6600 to recognize more

communication formats and

accurately decode information.

5.1 Firewall, Router, and Hub

5.2 LAN

| Conettix D6600 Communications Receiver/Gateway

3

Additional PSTN Communications Advantages

• Automatic number identification (ANI) system
identifies incoming telephone numbers.

• Each line card has four telephone lines.

• Receives signals on up to 32 telephone lines
simultaneously.

• Independent, configurable communication format
settings for each telephone line.

• Visual front panel light emitting diode (LED)
indicators for on-line and line-fault status conditions.

Two-way Audio

• Able to transfer calls to another line or extension.

• Activated by account numbers and by events.

LAN or WAN Gateway Communications

• Requires Conettix IP hardware components.

• Two-way communications with a control panel.

• Supervised network automation computer links.

• Supports up to 3200 network accounts.

• Ethernet configuration available.

• Supports 128-bit AES Rijndael encryption.

Supervision and Programming with Network
Communications

The protected premises sends supervision messages
to the D6600 at a programmed rate. Users can
program the supervision rate to be 5 seconds to 1275
seconds. The D6600 acknowledges the supervision
message, providing end-to-end security. If
authentication and encryption algorithms detect
potentially damaging activity, they alert the central
station operator.
The data network's communication link is continuously
supervised. Even when monitoring thousands of
control panels, the system consumes only a small
amount of bandwidth.

Front Panel Access

The D6600 enclosure design provides convenient
access to the CPU card or the hot-swappable
telephone line cards. A hot-swappable card can be
removed and replaced without affecting system
performance.

Flash Technology

Using the Conettix D6200 Programming/
Administration Software, flash technology in the
D6600 allows for software upgrades without
additional hardware or firmware changes.

Certifications and approvals

Australia Austel Approved

Region Certification

Europe CE 2004/108/EC; 2006/95/EC;

1999/5/EC; EN55022: 2006
+A1:2007, Class A; EN50130-4: 1995
+A1:1998 +A22003; EN60950-1:
2006; EN61000-3-2:2000;
EN61000-3-3:1995; TBR21: 1998

USA UL AMCX: Central Station Alarm Units

(UL1610, UL1635), AMCX7: Central
Station Alarm Units Certified for Canada
(cULus), APAW: Police Station Alarm
Units (UL365, UL464), APAW7: Police
Station Alarm Units Certified for Canada
(cULus), APOU: Proprietary Alarm Units
(UL1076), APOU7: Proprietary Alarm
Units Certified for Canada (cULus),
UOJZ: Control Units, System (UL864,
9th edition)

FM

CSFM 7165-1615:0242 7165 -- FIRE ALARM

CONTROL UNIT (COMMERCIAL)

CSFM 7165-1615:0238 7165 -- FIRE ALARM

CONTROL UNIT (COMMERCIAL)

CSFM 7300-1615:0179 7300 -- FIRE ALARM

CONTROL UNIT ACCESSORIES/MISC.
DEVICES

CSFM 7300-1615:0168 7300 -- FIRE ALARM

CONTROL UNIT ACCESSORIES/MISC.
DEVICES

FCC ESVUSA-25328-AL-N

Canada ULC AMCX7.S1871 - Central Station Alarm

Units Certified for Canada

ULC APOU7.S1871 Proprietary Alarm Units

Certified for Canada

IC 1249A-8925A

Hong Kong HKFSD

Brazil ANATEL 0841-03-2045

Installation/configuration notes

The D6600 and Monitoring Centers

The D6600 has extended edges so that installers can
mount it easily into a rack cabinet. Mount up to eight
D6600 units into a standard 48.3 cm (19 in.) rack
cabinet to conserve floor space. Each D6600 connects
32 telephone lines. Eight D6600 units can connect a
total of 256 telephone lines, process 600,000 digital
accounts, and process 28,800 supervised Internet or
intranet accounts.

USA ANSI National Institute of Standards and

Technology's Advanced Encryption
Standard Certification (Certificate
Number 82)

NIST National Institute of Standards and

Technology AES Certification

Notice

Rack cabinets are sold separately by a variety of
manufacturers.

Incorporating Conettix IP Function into the D6600

With the correct Conettix IP hardware components,
the D6600 can supervise the network communications
link. The Conettix IP hardware components include:

• Conettix D6201 Series IP Security Keys

| Conettix D6600 Communications Receiver/Gateway

4

• Conettix D6672 COM 1 Expansion Kit

• Conettix D6680 Ethernet Network Adapter

Network Communications and Control Panels

For network communications, it is necessary to use
one of following modules with the appropriate control
panel: Conettix C900V2 Dialer Capture Ethernet
Module or Conettix DX4020 Ethernet Network
Interface Module. Review the control panel
specifications for the recommended network interface
or dialer capture modules.

Parts included

Quantity Component

1 Conettix D6600 Communications Receiver/Gateway

1 Conettix D6610 CPU Card

1 Conettix D6615 CPU Terminator Card

1 Conettix D6641 Telephone Line Card (Expanded Memory)

1 Conettix D6645 Telephone Line Terminator Card

1 Conettix D6200CD CD-ROM

Includes the Conettix D6200 Programming/Administration
Software

1 P6601 Battery Cable

1 P6602 Input and Output Cable

Technical specifications

Enclosure

Rack Mount Dimensions (4U): 18 cm x 48.3 cm x 49.5 cm

(7.0 in. x 19.0 in. x 19.5 in.)

Standalone Dimensions: 18 cm x 45 cm x 49.5 cm

(7.0 in. x 17.75 in. x 19.5 in.)

Weight: 8.7 kg (19 lb)

Telephone

Telephone: RJ11C modular jacks, with

26 AWG or larger wire diameter

Ringer Equivalence Number (REN)

REN: 0.4 B

Industry Canada (IC) REN: 0.2

Display

Screen Dimensions: 1.8 cm x 15.2 cm (0.7 in. x

6.0 in.) dot matrix LCD, 5 x 7
dots per character. Shows two
separate lines, 40 characters per
line.

Indicators: LED display section indicates

receiver status and power.

Inputs and Outputs

For Automation Computer
Connection:

One RS-232 interface port COM3

Electrical

Power Requirements

AC Nominal Operating Range: 120 V or 230 V

AC Maximum Operating Range: 100 VAC to 120 VAC, 220 VAC

to 230 VAC, 50 Hz or 60 Hz,

2.5 A maximum

Standby Power: Uninterruptible power supply

(UPS) containing a sealed lead­acid battery, 12 V, 7 Ah to 18 Ah

Current Requirements

One Line Card Installed: Battery: 800 mA

UPS AC Standby: 350 mA

For Each Additional Line Card or
Terminal Card Pair:

One Network Communications
Card Installed:

Battery: 210 mA
UPS AC Standby: 35 mA

Battery: 10 mA
UPS AC Standby: 10 mA

Mechanical

Automation Outputs

Automation Outputs: SIA mode

6500 mode

For External Serial Printer, PC,
Modem, or Network Connection:

For Parallel Printer Connection: One parallel printer port

Number of Programmable Inputs: Two (wire harness included)

Number of Programmable
Outputs:

Optional Input

For Optional Network
Communications Expansion:

One RS-232 interface port COM4

Two (wire harness included)

One RS-232 interface port COM1

Environmental

Temperature (Operating): 0°C to 50°C

(+32°F to +122°F)

Trademarks

Trademark names are used throughout this document.
In most cases, these designations are claimed as
trademarks or registered trademarks in one or more
countries by their respective owners. Rather than
placing a trademark symbol in every occurrence of a
trademark name, Bosch Security Systems, Inc. uses
the names only in an editorial fashion and to the
benefit of the trademark owner with no intention of
infringing the trademark.

5 | Conettix D6600 Communications Receiver/Gateway

Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation in the United States and/or other countries.

Ordering information

Conettix D6600 Communications Receiver/Gateway

Supports communications through PSTN and/or LAN/
WAN. Supports 32 telephone lines, 3200 network
accounts, two-way audio, caller ID, ANI, and DNIS.

Order number D6600

Accessories

3200 Account Conettix IP Security Key (LPT)

Designed for parallel ports. Allows each Conettix
Communications Receiver/Gateway to support a
maximum of 3200 IP accounts.

Order number D6201

3200 Account Conettix IP Security Key (USB)

Allows each Conettix Communications Receiver/
Gateway to support a maximum of 3200 IP accounts.
Designed for USB ports.

Order number D6201-USB

500 Account Conettix IP Security Key (USB)

Allows each Conettix Communications Receiver/
Gateway to support 500 IP accounts. Designed for
USB ports.

Order number D6201-500-USB

P6602 Input and Output Cable

Supports use of input and output lines for Conettix
receivers.

Order number P6602

P6603 Acknowledgement Button

Spare acknowledgement button for Conettix D6600
Communications Receiver/Gateway.

Order number P6603

Conettix ITS-D6686-UL Ethernet Network Adapter

Order number ITS-D6686-UL

Conettix ITS-D6686-INTL Ethernet Network Adapter

Provides a 10/100 Base T network interface
connection for IP account monitoring and central
station automation with Conettix D6600
Communications Receiver/Gateway. Supports IPv6/
IPv4 dual stack and up to 256-bit AES encryption.

Order number ITS-D6686-INTL

Software Options

Conettix D6200CD CD‑ROM

Provides software for programming and operating
Conettix receivers. Includes PDF documentation for
hardware and software relating to the Conettix
Communications Receiver/Gateway.

Order number D6200CD

Conettix D6610 CPU Line Card

CPU card for Conettix D6600 Communications
Receiver/Gateway.

Order number D6610

Conettix D6615 CPU Terminator Card

Provides a shielded interface between the Conettix
D6610 CPU Line Card and external connections to
automation database computers and printers.

Order number D6615

Conettix D6641 Telephone Line Card

Answers and decodes signals from up to four
telephone lines using advanced digital signal
processing technology.

Order number D6641

Conettix D6645 Telephone Line Terminator Card

Provides isolation and transient suppression to the
Conettix D6641 Telephone Line Card.

Order number D6645

Conettix D6672 Com 1 Expansion Kit

Creates a third serial port on the Conettix D6600
Communications Receiver/Gateway. Provides a DB9
male connector and transient protection.

Order number D6672

P6601 Battery Cable

Connects a 12 VDC power source to the Conettix
D6600 Communications Receiver/Gateway.

Order number P6601

6 | Conettix D6600 Communications Receiver/Gateway

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
203 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2016 | Data subject to change without notice
2663469195 | en, V7, 26. Jan 2016