Bosch D6100IPV6-01 Specsheet

Intrusion Alarm Systems | Conettix D6100IPv6 Communications Receiver/Gateway

Conettix D6100IPv6 Communications
Receiver/Gateway

www.boschsecurity.com

u Up to 3200 accounts for local-area network (LAN) or

wide-area network (WAN) communications

The Conettix D6100IPv6 Communications Receiver/
Gateway provides simultaneous alarm communications
using:

• Public switched telephone network (PSTN lines).

• LAN, WAN, or cellular networks using standard
datagram protocol and internet protocol (UDP/IP).

The D6100IPv6 has a compact, economical design that
is well-suited for applications such as small central
stations, gated communities, security offices, or
university campuses. The D6100IPv6 uses the same
firmware and supports the same major communication
formats as the Conettix D6600 Communications
Receiver/Gateway.

System overview

PSTN Communications Configuration

This configuration uses existing telephone lines. A
control panel's signal transmits over a PSTN analog
telephone line to the D6100IPv6. The receiver
translates the signal to a common data format and
sends the signal through Ethernet LAN, WAN, or
RS-232 to a central station automation system.

Internet or Intranet Communications Configuration

This configuration requires Conettix IP components at
the premises, uses existing Ethernet or cellular
networks, and avoids additional telephone service

u Two lines for public switched telephone network

(PSTN) communications with Caller ID support

u Supports IPv6 and IPv4 networks

u NIST-FIPS197 certified for 128- to 256-bit AES

encryption

costs. This configuration permits the Conettix D6200
Programming/Administration Software to connect to
the D6100IPv6 remotely. A control panel's signal
transmits over the LAN, WAN, or cellular network to
the D6100IPv6. The D6100IPv6 translates the signal to
a common data format and sends the signal through
Ethernet LAN, WAN, or RS-232 to a central station
automation system. The central automation system
sends information to operator work stations.

Conettix D6200 Programming/Administration
Software

Conettix D6200 Programming/Administration Software
is a PC-based application that allows users to view,
change, upload, and download D6100IPv6
programming parameters. With the Conettix D6200
Programming/Administration Software, users can edit
programming parameters, manage IP accounts, and
view the status of the receiver.

Notice

Conettix D6200 Programming/Administration
Software works with the following operating
systems and associated service packs: 32-bit
Windows 2000 SP4, 32-bit and 64-bit Windows
XP, Windows Vista, Windows 7, and Windows 8.

1

2

3

4

4.2

7

8

9

10

11

4.1

6

4.3

5

5.1

5.2

| Conettix D6100IPv6 Communications Receiver/Gateway

2

Functions

Supported PSTN Formats

Acron Superfast ROBOFON

Ademco Slow Scantronics Scancom

Ademco Express SERIEE FSK/DTMF

Ademco High Speed Sescoa Super Speed

Ademco Contact ID SIA 8/20/300

CFSK BELL/V.21 SIA ADT

FBI Superfast SIA V.21

Franklin/Sescoa Silent Knight Fast

ITI Silent Knight FSK

Radionics (Bosch) BFSK Standard Pulse Formats

Radionics (Bosch) Hex Sur-Gard DTMF

Bosch Modem4 Telim

Bosch ModemII/IIe/IIIa

2

Veritech FSK

1. Access Control

2. Commercial Monitoring

3. Residential Monitoring

4. PSTN

4.1 Two-way Audio

4.2 Private Branch Exchange (PBX)

4.3 Analog Telephone Lines

5. LAN/WAN

5.1 Firewall, Router, and Hub

5.2 LAN

6. Conettix D6100IPv6 Communications Receiver/Gateway 1

7. Conettix D6100IPv6 Communications Receiver/Gateway N

8. RS-232

9. Conettix D6200 Programming/Administration Software

10. Automation System

11. Central Station Operators

Software Upgrades

Using the Conettix D6200 Programming/
Administration Software, the D6100IPv6 allows for
easy one-button software upgrades.

PSTN Communications

• Receives signals on two telephone lines
simultaneously with independent format settings for
each line.

• Supports the award winning VOIP compensation
feature for improved reception of digitally distorted
signals.

• Front panel LED indicators for on-line and line-fault
status conditions.

• Supports Two-way Audio by transferring calls to
another line activated by account numbers or events.

LAN or WAN Gateway Communications

• Two-way supervised IPv6 and IPv4 communication
support to control panels and automation systems

• Supports up to 3200 supervised LAN, WAN or cellular
network accounts

• Uses secure Conettix IP protocol with 256-bit AES
encryption and anti-substitution features

Supervision and Programming with Network
Communications

The protected premises sends supervision messages
to the D6100IPv6 at a programmed rate. Users can
program the supervision rate to be 5 seconds to 24
hours. The D6100IPv6 acknowledges the supervision
message, providing end-to-end security. If
authentication and encryption algorithms detect
potentially damaging activity, they alert the central
station operator. The data network's communication

3 | Conettix D6100IPv6 Communications Receiver/Gateway

link is continuously supervised. Even when monitoring
thousands of control panels, the system consumes
only a small amount of bandwidth.

Certifications and approvals

Region Certification

Europe CE 2004/108/EC EMC Directive (EMC);

2006/95/EC Low-Voltage Directive
(LVD); 1999/5/EC Radio equipment and
[-LT, -02]

USA UL AMCX: Central Station Alarm Units

(UL1610 and UL1635); AMCX7: Central
Station Alarm Units Certified for Canada
(cULus)

UL UOJZ: Control Units, System (UL864)

CSFM 7300-1615:0232 FIRE ALARM CON-

TROL UNIT ACCESSORIES/MISC. DEVI­CES

Brazil ANATEL 1701-13-1855

Installation/configuration notes

The D6100IPv6 and Monitoring Centers

The D6100IPv6 has extended edges so that installers
can mount it easily into a standard 48.3 cm (19 in)
rack cabinet. Rack cabinets conserve floor space.

1 External Battery Connection

1 Country Specific AC Transformer (refer to Ordering

Information for details)

Technical specifications

Automation Outputs

Automation Outputs: SIA mode

6500 mode

Enclosure

Rack Mount Dimensions (2U): 9.0 cm x 37.5 cm x 25.5 cm (3.5

in x 12 in x 10 in)

Standalone Dimensions: 9.0 cm x 30.5 cm x 25.5 cm (3.5

in x 12 in x 10 in)

Weight : 3 kg (7 lb)

Environmental Considerations

Temperature (operating): 0° - +50°C (+32° - +122°F)

Power Requirements

AC Nominal Operating Range: 18 VAC ±15% with 50 VA

transformer

Notice

Rack cabinets are sold separately by a variety of
manufacturers.

The D6100IPv6 connects directly or through a network
to automation computers. Users can use the
automation system or the D6100IPv6 keypad to
acknowledge events. There is up to a 2000 event
history buffer.

Network Communications and Control Panels

For network communications, with installed telephone
based control panels, use a Conettix Dialer Capture
module. For network communication with Bosch
control panels, use an integrated Cellular or Ethernet
Communicator.
For network communication with control panels
without Conettix IP support, use the C900V2 Dialer
Capture Ethernet Module.
The D6100IPv6 can supervise up 10 network accounts
without a D6201 Security Key. To use the full account
capacity, a D6201 Security Key is required.

Parts included

Quantity Component

1 Conettix D6100IPv6 Communications Receiver/Gateway

Standby Power: Uninterruptible power supply

(UPS) containing a sealed lead­acid battery, 12 V, 7 Ah - 18 Ah

Current Requirements

Battery Current: 340 mA

UPS AC Standby Current: 260 mA

Telephone

Telephone connection: RJ11C modular jacks, with 26

AWG or larger wire diameter

Ringer Equivalence Number (REN)

REN: 0.4 B

Industry Canada (IC) REN: 0.2

Display

Screen Dimensions: 1.8 cm x 15.2 cm (0.7 in x 6.0 in)

dot matrix LCD , 5 x 7 dots per
character. Shows two separate
lines, 40 characters per line.

Indicators: LED display section indicates

receiver status and power.

1 P6602 Input and Output Cable

1 Conettix D6200CD CD-ROM

4 | Conettix D6100IPv6 Communications Receiver/Gateway

Inputs and Outputs

For Automation Computer
Connection:

For External Serial Printer, PC,
Modem:

For Parallel Printer Connection: One parallel printer port

Number of Programmable Inputs: Two (wire harness included)

Number of Programmable
Outputs:

Ethernet:

One RS-232 interface port COM3

One RS-232 interface port COM4

Two (wire harness included)

RJ-45 modular jack for Ethernet
10Base-T or 100Base-TX (Auto­Sensing)

Ordering information

Conettix D6100IPv6 Communications Receiver/Gateway

Provides a 10/100 Base T network interface
connection for IP account monitoring and central
station automation with Conettix D6600
Communications Receiver/Gateway. Supports IPv6/
IPv4 dual stack and up to 256-bit AES encryption.

Order number D6100IPv6

Accessories

Conettix D6100IPv6 Kit (120 VAC)

Includes one D6100IPv6, one transformer 120 VAC,
and one blade-style plug. For use in Colombia,
Dominican Republic, Guatemala, Haiti, Honduras,
Panama, Taiwan, Bahamas, Bermuda, Canada, Costa
Rica, Puerto Rico, Mexico, and the United States.

Order number D6100IPV6-01

Conettix D6100 Rack Mount Kit

Standard rack mount kit measuring 48.3 cm (19 in.).

Order number D6100RMK

3200 Account Conettix IP Security Key (USB)

Allows each Conettix Communications Receiver/
Gateway to support a maximum of 3200 IP accounts.
Designed for USB ports.

Order number D6201-USB

500 Account Conettix IP Security Key (USB)

Allows each Conettix Communications Receiver/
Gateway to support 500 IP accounts. Designed for
USB ports.

Order number D6201-500-USB

P6602 Input and Output Cable

Supports use of input and output lines for Conettix
receivers.

Order number P6602

Conettix D6100IPv6 Kit (230 VAC)

Includes one D6100IPv6, one transformer 230 VAC,
and one round pin-style plug. For use in Albania,
Angola, Chile, Greece, Greenland, Guinea, Iceland,
Luxembourg, Russian Federation, South Korea,
Thailand, United Arab Emirates, Yugoslavia, Austria,
Austria, Belgium, Bulgaria, Croatia, Denmark, Finland,
France, Germany, Hungary, India, Indonesia, Iran, Iraq,
Israel, Italy, Mongolia, Netherlands, Norway, Pakistan,
Poland, Portugal, Romania, Spain, Sweden,
Switzerland, Kuwait, and Malaysia.

Order number D6100IPV6-02

Conettix D6100IPv6 Kit (240 VAC)

Includes one D6100IPv6, one transformer 240 VAC,
and one inverted V-style plug. For use in Australia,
Argentina, and New Zealand.

Order number D6100IPV6-04

Conettix D6100IPv6 Kit (240 VAC)

Includes one D6100IPv6, one transformer 240 VAC,
and one rectangle-style plug. For use in Gambia,
Ireland, United Kingdom, Cyprus, Falkland Islands,
Grenada, Kenya, and Uganda.

Order number D6100IPV6-05

5 | Conettix D6100IPv6 Communications Receiver/Gateway

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
203 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2015 | Data subject to change without notice
20715604747 | en, V1, 02. Nov 2015