Bosch AUTODOME IP starlight 7000i Datasheet

Video - AUTODOME IP starlight 7000i

H.265

AUTODOME IP starlight 7000i

u Starlight technology with excellent low-light

performance and High dynamic range of 120 dB
to see detail in difficult light conditions

u Incorporates the latest H.265 video

compression technology to reduce bandwidth
and storage requirements

The AUTODOME IP starlight 7000i camera
incorporates the latest in Video Analytics, starlight
technology, and video streaming. With starlight
imaging technology for excellent low-light sensitivity
and the most robust Intelligent Video Analytics on the
market, the camera delivers unmatched picture
quality. Even under the most challenging light
conditions, the 30x PTZ dome camera delivers high­definition (HD) 1080p video. Easy to install, the
camera is available in either a field-proven, outdoor
pendant housing or an indoor, in-ceiling housing.

Functions

Exceptional low-light performance

The latest sensor technology combined with the
sophisticated noise suppression results in an
exceptional sensitivity in color. The low-light
performance is so good that the camera continues to
provide excellent color performance even with a
minimum of ambient light.

High dynamic range

The dynamic range of the camera is outstanding and is
obvious in real-world performance comparisons. In
extended dynamic range mode, the camera uses an
electronic shutter to capture four images with
different exposure time and reproduce a high-contrast

u Built-in Intelligent Video Analytics alert

operators in case of unusual scene activity

u Edge intelligence with Intelligent Tracking and

object detection even when the camera is
moving

u Exceptional reliability with 3-year warranty

(including on moving parts)

frame. The result is that you can view details in both
the bright areas (highlights) and the dark areas
(shadows) of a scene at the same time. You can easily
distinguish objects and features (for example, faces)
with bright backlight.

H.265 high-efficiency video encoding

The camera is designed on the most efficient and
powerful H.264 and H.265/HEVC encoding platform.
The camera is capable of delivering high-quality and
high-resolution video with very low network load. With
a doubling of encoding efficiency, H.265 is the new
compression standard of choice for IP video
surveillance systems.

Snap to zoom

Drawing a box in the image will trigger the camera to
zoom to the correct position.

IntelligentVideoAnalytics on the edge

With built-in video content analysis (VCA), the camera
reinforces the Intelligence-at-the-Edge concept where
edge devices become increasingly intelligent.

The camera comes with the state-of-the-art VCA
method by Bosch, Intelligent Video Analytics, that
reliably detects, and analyzes moving objects while
suppressing unwanted alarms from spurious sources
in the image.

Video - AUTODOME IP starlight 7000i

2 | 13

With this method, the camera is able to detect idle
and removed objects as well as loitering, multiple line
crossing, and trajectories. This method also supports
BEV (Bird’s Eye View) People counting.

Video Analytics while camera is moving

Outside of pre-positions and even while the PTZ
camera is moving, whether on guard tours or
manually, the IntelligentVideoAnalytics application
can detect and start alarms when objects are in alarm
fields. These alarm fields are defined once across all
PTZ camera views. The camera can automatically
trigger an alarm if any part of a field within the
camera's view becomes active while on a guard tour
sweeping across the monitored areas.

Intelligent Tracking

The camera utilizes the built-in Intelligent Video
Analytics to follow an individual or an object
continuously.

When Intelligent Video Analytics detects objects while
the camera is in a stationary position, the camera
activates the Intelligent Tracking feature. This feature
controls the pan/tilt/zoom actions of the camera to
track the objects and keep them in view in the scene.

The new Intelligent Tracking is based on robust flow
detection algorithms which can reliably track moving
objects even under challenging scenes.

The tracking and detection reliability can be enhanced
further with virtual masking for scenes with a lot of
background motion such as trees or other objects
creating constant motion in the scene.

Auto mode: When configured in this mode, the
camera actively analyzes the video to detect any
moving object. If it detects movement, it begins to
track the object. This mode is most useful for
scenarios where normally no motion is expected.

One Click mode: In this mode, users can click an
object moving in the live video image to enable the
camera to track the movement of the selected object.
This mode is most useful for scenarios where normal
scene activity is expected.

CameraTrainer

Based on examples of target objects and non-target
objects, the new CameraTrainer program uses
machine learning to allow the user to define objects of
interest and generate detectors for them. In contrast
to the moving objects that the Intelligent Video
Analytics application detects, the CameraTrainer
program detects both moving and non-moving objects
and classifies them immediately. Using Configuration
Manager, you can configure the CameraTrainer
program using both live video as well as recordings
available through the respective camera. The resulting
detectors can be downloaded and uploaded for
distribution to other cameras.

Intelligent streaming reduces bandwidth and storage
requirements

The low-noise image and the efficient H.265
compression technology provide clear images while
reducing bandwidth and storage by up to 80%
compared to standard H.264 cameras. With this new
generation of cameras an extra level of intelligence is
added with Intelligent Streaming. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio. The smart
encoder continuously scans the complete scene as
well as regions of the scene and dynamically adjust
compression based on relevant information like
movement. Together with Intelligent Dynamic Noise
Reduction, which actively analyzes the contents of a
scene and reduces noise artifacts accordingly, bitrates
are reduced by up to 80%. Because noise is reduced
at the source during image capture, the lower bitrate
does not compromise image quality. This results in
substantially lower storage costs and network strain
and still retain a high image quality and smooth
motion.

Image Stabilization

As PTZ cameras continue to increase their optical
zoom capabilities, image stabilization becomes critical
to eliminate movement caused by unstable camera
mounts. Minor movement of the camera mount can
shift the field of view by a large distance when the
camera is zoomed to a high value. This can render
images unusable. The camera incorporates an Image
Stabilization algorithm; when turned on, the camera
detects continuous vibration. If it detects vibration,
the camera dynamically corrects the shaky video in
both the vertical and horizontal axis, resulting in
improved image clarity and a stable field of view on
the monitor.

Auto Exposure (AE) region and Focus region

With the Auto Exposure (AE) function, the camera
computes the lighting condition of the entire scene.
Then the camera determines the optimum level of iris,
gain, and shutter speed.

In AE region mode, users can designate a specified
area of the scene, based on pre-positions. The camera
computes the lighting condition of the specified area.
Then the camera determines the optimum level of iris,
gain, and shutter speed to get an image.

Focus region mode, unlike normal auto focus mode,
allows users to focus on a specified area of the scene.

Users have the ability to customize these modes, if
necessary, for the specific requirements of the site.

Simple set-up

The camera has a very intuitive user interface that
allows fast and easy configuration. Configurable scene
modes are provided with the best settings for a
variety of applications.

• Standard

Video - AUTODOME IP starlight 7000i

3 | 13

This mode is optimized for most standard scenes both
indoor and outdoor.

• Color Only (Traffic)

In this mode, the camera does not switch to
monochrome mode at low light levels. The mode is
optimized to minimize motion artifacts and to capture
the color of vehicles/pedestrians and traffic lights,
even at night, for scenarios such as city surveillance
and traffic monitoring.

• Indoor

This mode is ideal for indoor applications where
lighting is constant and does not change. Auto white
balance will be mainly focused on low color
temperature 3200K.

• Sensitivity boost

This mode provides maximum sensitivity in low light
scenes by using longer exposure times, resulting in
bright images even in extreme low light.

• Fast movement

This mode is used for monitoring fast moving objects
like cars in traffic scenes. Motion artifacts are
minimized and the image is optimized for a sharp and
detailed picture in color and monochrome.

• Vibrant

This mode provides a more vivid image with increased
contrast, sharpness, and saturation.

Sophisticated alarm responses

The camera supports advanced alarm control that
uses sophisticated rules-based logic to determine how
to manage alarms. In its most basic form, a “rule”
could define which input(s) should activate which
output(s). In a more complex form, inputs and outputs
can be combined with pre-defined or user-specified
commands to perform advanced camera functions.

Pre-positions and tours

The camera supports 256 pre-positions and two styles
of Guard Tours: Pre-position and Record/Playback.
The Pre-position tour has capability for up to 256 pre­positions with a configurable dwell time between pre­positions and can be customized as to the order and
the frequency that each Pre-position is visited. The
camera also provides support for two (2) recorded
tours, which have a total duration of 15 minutes of
movements. These are recorded macros of an
operator’s movements, including pan, tilt, and zoom
activities, and can be played back in a continuous
manner.

Data security

Special measures are necessary to ensure the highest
level of security for device access and data transport.
On initial setup, the camera is only accessible over
secure channels. You must set a service-level
password in order to access camera functions.

Web browser and viewing client access can be
protected using HTTPS or other secure protocols that
support state-of-the-art TLS 1.2 protocol with updated
cipher suites including AES encryption with 256 bit
keys. No software can be installed in the camera, and
only authenticated firmware can be uploaded. A three­level password protection with security
recommendations allows users to customize device
access. Network and device access can be protected
using 802.1x network authentication with EAP/TLS
protocol. Superior protection from malicious attacks
is guaranteed by the Embedded Login Firewall, on­board Trusted Platform Module (TPM) and Public Key
Infrastructure (PKI) support.

The advanced certificate handling offers:

• Self-signed unique certificates automatically
created when required

• Client and server certificates for authentication

• Client certificates for proof of authenticity

• Certificates with encrypted private keys

Power options

The camera can be powered by either PoE+ (IEEE

802.3at) capable network switch or a High Power-

over-Ethernet Midspan. In a PoE configuration, a
single (Cat5e/Cat6e) cable connection provides
power while simultaneously supporting data and video
transmission. For maximum reliability, the camera can
operate with 24 VAC power source a redundant power
system of PoE and a separate connected
simultaneously. If either the PoE or 24 VAC power
source fails, the camera seamlessly transitions to the
remaining power source. The camera can also accept
a standard 24 VAC power source if a PoE network
interface will not be used.

For pendant models used in outdoor applications that
require heaters, a High PoE Midspan (60 W) by Bosch
is required to power both the camera and its internal
heaters.

For in-ceiling or indoor pendant applications that
don’t require heater power, standard PoE+ (IEEE

802.3at) midspans or switches can be used to power

the camera.

System integration and ONVIF conformance

The camera conforms to the ONVIF (Open Network
Video Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. The ONVIF Profile S
specification allows easy integration with other

Video - AUTODOME IP starlight 7000i

4 | 13

conformant devices and VMS. ONVIF conformant
devices are able to exchange live video, audio,
metadata, and control information, and ensure that
they are automatically discovered and connected to
network applications such as video management
systems.

PTZ drive and mechanism

The camera offers a reliable drive platform, designed
for continuous tours for at least three years. It
provides an unlimited three-year warranty. Its design
provides optimum smoothness in motion when used
at low speeds or with a joystick.

Pan and tilt preset repeatability are accurate to within
±0.1 degrees to ensure that the correct scene is
captured every time. The camera delivers variable
pan/tilt speeds from a crawl speed of only 0.1 degrees
per second to a full 400 degrees per second. The
camera is capable of pan speeds of 400 degrees per
second and tilt speeds of 300 degrees per second
between pre-positions. The camera provides a tilt
angle 18 degrees above the horizon, and a pan range
of up to 360 degrees continuous rotation.

Design for challenging environments

Pendant housings are rated to provide IP66 protection
and offer an operating temperature range down to -40
°C (-40 °F). The pendant model comes fully assembled
with a sunshield which can be easily removed for use
in indoor applications. In addition, both pendant and
in-ceiling camera models have a high-resolution acrylic
bubble for enhanced image clarity.

Camera Diagnostics

The camera has several built-in sensors / advanced
diagnostics that display warnings on the camera’s
OSD about the health of the camera. The diagnostics
log records the events such as:

• Low voltage - a drop in incoming power below the
level where the camera becomes non-functional

• High temperature - the internal temperature
exceeds specifications

• Low temperature - the internal temperature
exceeds minimum levels

• High humidity - the internal humidity exceeds 70%

• Total hours of camera operation

Certain events also appear on the camera’s OSD.
These diagnostic records are available for the
installation or service technician to review.

Certifications and approvals

For a full list of all related certifications/standards,
refer to the Product Tests Report, available on the
online catalog, on the Documents tab of the product
page for your device. If the document is unavailable on
the product page, contact your sales representative.

Electromagneti
c compatibility
(EMC)

FCC Part 15, ICES-003
EN 55024:2010 + A1:2015
EN 55032:2015/AC:2016

Ease of installation and servicing

The camera has been designed for quick and easy
installation, a key feature from Bosch IP video
products. All housings feature recessed screws and
latches for increased tamper resistance.

Bosch offers a full complement of hardware and
accessories (sold separately) for wall, corner, mast,
roof, and pipe mount for indoor and outdoor
environments, which allow the camera to be adapted
easily to individual site requirements.

Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.

Fiber Optic Kit

Bosch offers the optional VG4-SFPSCKT, a unique
media converter module for use with various Bosch
devices. This media converter module is designed to
accept a wide-range of 10/100Mbps SFP modules for
use with Multimode or Single-mode optical fiber with
LC or SC connectors.

The media converter module along with the SFP
module is user-installed directly into the camera‘s
power supply box to provide an integrated fiber optic
solution.

Product Safety Complies with UL, CE, CSA, EN,

and IEC standards including:
UL 62368-1
EN 62368-1
EN 60950-1
CAN/CSA-C22.2 No. 62368-1-14
IEC 62368-1 Ed.2
IEC 60950-1 Ed.2
IEC 60950-22 Ed.2

Marks UL, CE, WEEE, RCM, EAC, VCCI,

FCC, RoHS

Region Regulatory compliance/quality marks

Europe CE Declaration of Conformity

(DoC) - AUTODOME IP
starlight 7000i

USA UL 62368

UL 60950

Video - AUTODOME IP starlight 7000i

5 | 13

Technical specifications

AUTODOME IP starlight 7000i

Imager 1/2.8 in. CMOS sensor

Effective
Picture
Elements
(Pixels)

Lens 30x motorized Zoom

Field of View
(FOV)

Focus Automatic with manual override

Iris Automatic with manual override

Digital Zoom 12x

Day/Night
switch

1944 x 1212 (2.35 MP)

4.3 mm to 129 mm
F1.6 to F4.7

2.3° to 64.7°

Automatic IR cut filter

Backlight
compensation
(BLC)

White balance 2000K to 10,000K

Day/Night Monochrome, Color, Auto

Defog mode
feature

Noise Reduction Intelligent Dynamic Noise

DORI Distance to object

Detection
25 px/m
(8 px/ft)

On / Off / Intelligent Auto
Exposure (IAE)

ATW, AWB Hold, Extended
ATW, Manual, Sodium Lamp
Auto, Sodium Lamp, indoor,
outdoor

Improves visibility when
viewing foggy or other low­contrast scenes.

Reduction

WIDE 1X TELE 30X Scene

width

61 m
(200 ft)

1913 m
(6276 ft)

77 m
(252 t)

Video performance - Sensitivity

(3100K, reflectivity 89%, 1/30, F1.6, 30 IRE)

Color 0.0077lx

Monochrome 0.0008lx

Video performance - Dynamic range

High dynamic
range

Measured
according to
IEC 62676 Part
5

120 dB WDR

100 dB WDR

Additional Camera Settings

Gain control AGC, Fixed, Region per pre-

position

Aperture
Correction

Electronic Shutter
Speed (AES)

Signal-to-Noise
Ratio (SNR)

Horizontal and vertical

1/1 sec to 1/10000 sec (22
steps)

>55dB

Observation
63 px/m
(19 px/ft)

Recognition
125 px/m
(38 px/ft)

Identification
250 px/m
(76 px/ft)

24 m
(79 ft)

12 m
(39 ft)

6 m
(20 ft)

765 m
(2510 ft)

383 m
(1255 ft)

191 m
(628 ft)

31 m
(100 ft)

15 m
(50 ft)

8 m
(25 ft)

The nylon bubble material is required to meet the
IK10 shock rating. The optical characteristics of nylon
compared to the standard acrylic bubble affect the
resolution and sharpness of the video image.

For the camera to give the best image that fits your
application, consider the important limitations in the
table that follows:

DORI Detection 25 px/m (8 px/ft)
Specifications Standard bubble

(acrylic)

Distance to
object

Optical zoom 30x 30x

1913m
(6276ft)

IK10 bubble
(nylon)

200m (656ft)

Video - AUTODOME IP starlight 7000i

6 | 13

Video content analysis

Analysis
type

Configurat
ions

Calibratio
n

Alarm
rules
(combinab
le)

Object
filters

IntelligentVideoAnalytics

Off / Global VCA / Profiles 1 - 16

Automatic self-calibrating when height
is set

Any object, Object in field, Crossing
line, Entering field, Leaving field,
Loitering, Following route, Idle object,
Removed object, Counter, Occupancy,
Crowd detection, Condition change,
Similarity search, Tampering

Duration, Size, Aspect ratio v/h, Speed,
Direction, Object classes (Upright
persons, Bikes, Cars, Trucks), Color

Miscellaneous

Network

Video
compression

Streaming Four (4) streams: Two (2)

Frame rate 1080p: 30fps; 720p: 60fps

Resolutions (H x V)

1080p HD 1920 x 1080

720p HD 1280 x 720

1.3 MP 5:4
(cropped)

D1 4:3
(cropped)

640x 480 640 x 480

H.265, H.264, M-JPEG

configurable streams in H.264 or
H.265; One (1) I-frames-only
stream based on first stream; One
(1) M-JPEG Stream

1280x 1024

704 x 480

Sectors/Title 4, 8, 12, or 16 user-selectable,

independent Sectors, each with 20
characters per Title

Privacy Masks 32 individually configurable Privacy

Masks; maximum 8 per Pre-position;
programmable with 3, 4 or 5
corners; selectable color of Black,
White, Gray, “Auto” (average
background color)

Virtual
Masking

Pre-positions 256 Pre-positions, each with 20

Guard Tours Custom Recorded Tours - two (2),

24 individually configurable Virtual
Masks to hide parts of the scene
(background motion such as moving
trees, pulsating lights, busy roads,
etc.) which should not be
considered for flow analysis to
trigger Intelligent Tracking.

characters per Title

total duration 30 minutes: Pre­position tour - one (1), consisting of
up to 256 scenes consecutively, and
one (1) customized with up to 64
user-defined scenes

432p SD 768 x 432

288p SD 512 x 288

144p SD 256 x 144

Ethernet 10BASE-T/100BASE-T, auto-

sensing, half/full duplex

Encryption TLS 1.2, DES, 3DES, AES

Ethernet
connector

GOP Structure IP, IBP, IBBP

Data Rate
(H.265, 1080P)

Overall IP Delay 60 fps: 166 ms (typical)

Interoperability ONVIF ProfileS, ONVIF Profile G,

RJ45

61 kbps to 2.8 Mbps (depending
on the scene, the frame rate, and
the quality settings)

30 fps: 233 ms (typical)

ONVIF Profile T

Supported
Languages

English, Czech, Dutch, French,
German, Italian, Polish, Portuguese,
Russian, Spanish, Japanese,
Chinese

GB/T 28181

Video - AUTODOME IP starlight 7000i

7 | 13

Protocols IPv4, IPv6, UDP, TCP, HTTP,

HTTPS, RTP/RTCP, IGMP V2/V3,
ICMP, ICMPv6, RTSP, FTP, ARP,
DHCP, APIPA (Auto-IP, link local
address), NTP (SNTP),
SNMP(V1,V3, MIB-II), 802.1x,
DNS, DNSv6, DDNS (DynDNS.org,
selfHOST.de, no-ip.com), SMTP,
iSCSI, UPnP(SSDP),
DiffServ(QoS), LLDP, SOAP,
Dropbox™, CHAP, digest
authentication

Note: Dropbox is a trademark of Dropbox, Inc.

The table that follows shows the average typical
optimized bitrate, in kbits/s, for different frame rates:

FPS H.264 H.265

30 2470 2060

25 2410 1810

15 1690 1260

8 1090 820

4 670 500

2 420 310

1 260 190

Actual bitrate may vary depending on the scene,
picture settings, and encoder profile settings.

Mechanical

In-Ceiling Pendant

Pan Range 360° cont. 360° cont.

Tilt Angle 1° above

horizon

Pre-position
Speed

Pan: 400°/s
Tilt: 300°/s

18° above
horizon

Pan: 400°/s
Tilt: 300°/s

Intelligent
Tracking Speed

Electrical

Input
voltage

Power
Consumpti
on
(typical),
with
heaters

Power
Consumpti
on
(typical)

Current
consumpti
on, 24 VAC

Current
consumpti
on, 60 W

Redundant
configurati
on

(only when using

the PoE accessory

identified in the

Accessories

section of the

Ordering

information on the

datasheet)

Surge
suppressio
n

Audio

Audio

>0.2°/second (minimum)

In-Ceiling Pendant
24 VAC

60 W (using the midspan accessory
NDP-6001B, required to power the
heater)

30 W(IEEE 802.3at, class 4 standard,
when used without powering the heater)

51.0 W / 54.0 VA

19.2 W /

33.6 VA
(without
heaters)

19.2 W / 33.6 VA (heaters
off / without heater
connected in 24 V power
supply box)

Connect both a 60 W midspan and a
separate 24 VAC power source. If either
power source fails, the camera switches
automatically to the other power source.

Built-in surge suppression for power,
data, and network interfaces (Refer to
the A&E Specifications for details.)

Pan/Tilt Modes

• Turbo mode
(Manual
Control)

• Normal Mode

Pre-position
Accuracy

Pan: 0.1°/s - 400°/s

Tilt: 0.1°/s - 300°/s

0.1°/s-120°/s 0.1°/s-120°/s

± 0.1° typ. ± 0.1° typ.

- Standard G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
AAC, 16 kHz sampling rate

- Signal-to-

>50 dB

Noise Ratio

- Audio

Bidirectional (full-duplex)

Streaming

Video - AUTODOME IP starlight 7000i

8 | 13

Local Storage

Memory Card
Slot

User-supplied SD/SDHC/SDXC
memory card (maximum 2TB ­SDXC)

Recording Continuous recording of video and

audio, alarm/events/schedule
recording

Fiber Optic Kit

VG4-SFPSCKT

Description Fiber Optic Ethernet Media

Converter kit 2.
Requires a small form-factor
pluggable (SFP) module (sold
separately).

Data Interface Ethernet

Data Rate 100 Mbps

IEEE 802.3 Compliant
Full Duplex or Half Duplex
Electrical Port
Full Duplex Optical Port

Compatible

CNFE2MC

Receiver

Installation Installed inside a VG4-A-PA0, VG4-

A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or
a VG4‑A‑PSU2 power supply box
with supplied mounting hardware

2. Kit available separately and must be installed inside the AUTODOME power supply box.

SFP Modules

Description Interchangeable modules available

for use with MMF or SMF optical
fiber.

Type Connec

tor

SFP-2 MMF Duplex

LC

SFP-3 SMF Duplex

LC

SFP-25MMF Single

SC

SFP-26MMF Single

SC

Fiber Compatibility

Optical Fiber
Compatibility,
MMF

50/125µm MMF. For 50/125µm
fiber, subtract 4dB from the
specified optical budget value.
Must meet or exceed fiber
standard ITU-T G.651.

Optical Fiber
Compatibility,

8-10/125µm SMF. Must meet or
exceed fiber standard ITU-T G.652.

SMF

Optical
Distance
Specifications

Specified transmission distances
are limited to the optical loss of
the fiber and any additional loss
introduced by connectors, splices,
and patch panels. The modules are
designed to operate over the entire
optical loss budget range, so they
do not require a minimum loss in
order to operate.

Wavelen
gth
(transmi
t /
receive)

1310nm
/
1310nm

1310nm
/
1310nm

1310nm
/
1550nm

1550nm
/
1310nm

Max.
Distance

2km
(1.2mile
s)

20km
(12.4mil
es)

2km
(1.2mile
s)

2km
(1.2mile
s)

Data Interface Ethernet

Data Rate 100 Mbps

IEEE 802.3 Compliant

Weight (all SFP

0.23 kg (0.05 lb)

modules)

Dimensions
(LxWxH)

SFP-2, SFP-3: 55.5 x 13.5 x 8.5 mm
(2.2 x 0.5 x 0.3 in.)

SFP-25, SFP-26: 63.8 x 13.5 x 8.5
mm (2.5 x 0.5 x 0.3 in.)

User Connections

Power,

RJ45 100Base-T

Network

Power, Camera 24VAC, 50/60Hz

Alarm Inputs

2 supervised, 5 non-supervised

(7)

Alarm Outputs
(4)

1 dry contact relay, 3 open
collector/transistor outputs
Programmable for “normally open”
or "normally closed"
32 VDC @ 150 mA maximum

Audio 1 x mono line in, 1 x mono line out

Video - AUTODOME IP starlight 7000i

9 | 13

Signal line in: 20 kOhm typical,

0.707 Vrms

Signal line out: 0.707 Vrms at 16
Ohm, typical

Communications / Software Control

Serial protocols Bosch OSRD, Pelco P/D, Forward

Vision, and Cohu
Note: A separate license (MVS­FCOM-PRCL) is required.

Environmental

In-Ceiling Pendant

Ingress
Protection
Rating/
Standard

Operating
temperatur
e (with
heater
wired)

Storage
temperatur
e

Operating
Humidity

Vibration IEC 60068-2-6 IEC 60068-2-6

Shock IEC 60068-2-27 IEC 60068-2-27

Salt Mist
Spray
(Corrosion
Test)

IP54, Plenum
rated

-10 to +40 °C
(+14 to +104 °F)

-40 to +60 °C
(-40 to +140 °F)

0% to 90% RH,
(non­condensing)

IP66, NEMA 4X ¹

-40 to +55 °C
(-40 to +131 °F)

-10 to +55 °C
(+14 to +131 °F)
(without heater
wired)
Maximum
temperature: 74
°C (165 °F) in
accordance with
NEMA TS 2-2003
(R2008)

-40 to +60 °C
(-40 to +140 °F)

0% to 100% RH,
condensing

NEMA TS2
Section 2.2.8

NEMA TS2
Section 2.2.9

IEC 60068-2-52

-Access to Hazardous parts

-Ingress of solid foreign objects (falling dirt, circulating

dust, settling dust)

-Ingress of water (dripping and light splashing, hose

down and splashing)

Construction

Dimensions 224 mm (8.8 in.) x 299.4 mm

(11.8 in.)

Weight In-ceiling: 2.6 kg (5.7 lb)

Pendant: 3.2 kg (7 lb)

Bubble Size 153.1mm diameter (6.03in.)

Construction
Material , Housing

Construction
Material , Bubble

Standard Color White (RAL 9003)

Standard Finish Powder coated, sand finish

In-ceiling: Magnesium

Pendant: Cast aluminum

In-ceiling: acrylic

Pendant: acrylic
Pendant (IK10): nylon

Mounts/Accessories

In-ceiling bubbles

Clear HD high-resolution acrylic VGA-BUBHD-

CCLA

Tinted HD high-resolution acrylic

VGA-BUBHD-CTIA

(Included with in-ceiling camera
models.)

Pendant bubbles

Clear high-resolution acrylic

(Included with pendant camera

VGA-BUBBLE­PCLA

models.)

Tinted high-resolution acrylic VGA-BUBBLE-

PTIA

Clear rugged IK10-rated nylon* VGA-BUBBLE-

IK10

*Included with NDP-7512-Z30K

Mounts

External
Mechanical
Impact

1. NEMA 4X for:

IEC 60068-2-75:
IK10
(only models
ending in "-K")

Pendant Arm Mounts

Wall Arms VG4-A-PA0 (no

transformer)

VG4-A-PA1 (120VAC
transformer)

Video - AUTODOME IP starlight 7000i

206.89

[8.145]

175.99
[6.929]

21.29

[0.838]

99.76
[3.928]

IP

78.04
[3.072]

IP

204.49

[8.051]

ø

74.65

[2.939]

HD

95.88

[3.775]

HD

mm
[in.]

ø

mm
[in.]

134.6
[5.30]

366.9

[14.44]

11.0

[0.43]

160.0
[6.30]

186.1
[7.33]

169.9
[6.69]

158.0
[6.22]

R 76.6
[3.01]

189.0
[7.44]

224.0
[8.82]

549.6

[21.64]

532.1

[20.95]

469.1

[18.47]

201.2
[7.92]

216.4
[8.52]

22.86
[0.90]

86.7

[3.42]

299.4

[11.79]

R 76.6

[3.01]

189.0
[7.44]

224.0

[8.82]

VG4-A-PA2 (230VAC
transformer)

Pendant Arm with Wiring VG4-PEND-ARM

10 | 13

Mounting plate for VG4-

VG4-PEND-WPLATE

PEND-ARM

Optional Mounting Plates for Arm Mounts

Corner Mounting Plate VG4-A-9542

Pole Mounting Plate VG4-A-9541

Pendant Pipe Mounts

Pipe Mount Kit VG4-A-9543

Pendant Roof Mounts

Roof (Parapet) Mount

(VG4-A-9543 Pipe Mount Kit required. Available

separately.)

VGA-ROOF-MOUNT
(with 1.5-inch NPT
tapered male
threads)

Optional Mounting Plates for Roof Mounts

Flat Roof Adapter for Parapet

LTC 9230/01

Mount

In-ceiling Support Kits VGA-IC-SP (Bracket

for suspended or
drop ceilings)

Fig.2:

Dimensions, AUTODOME7000 pipe mount,

pendant mount

1 Power supply box and sunshield
2 Sunshield removed
3 Mounting plate
4 Power supply box

Dimensional Drawings

Fig.1:

AUTODOME 7000 series In-ceiling

175

6.9

193

7.6

58

2.3

236

9.3

203

8.0

133.4

5.25

133.4

5.25

219.1

8.63

178

7.0

38

1.5

mm

in.

88.9

3.50

88.9

3.50

10.2

0.40

152.4

6.0
1-1/2 NPT

69.9

2.75

101.6 Typ.

4.0

10.4
8 x 0.41

114.3

4.50 Typ.

228.6

9.0

279.4

11.0

1022.4

40.25

976.1

38.43

88.1

3.47

1190.8

46.88

616

24.25

346.2

13.63

Ø 10.4

0.41

16.0 Typ.

0.63

111 Typ.

4.37

6.35 Typ.

0.25

279.4

11.00

6.35

0.25

378

14.88

254

10.00

11.0

04.3

216.4

8.52

170.0

6.69

134.6

5.30

160.0

6.30

50.8

2.00

105.0

4.13

Video - AUTODOME IP starlight 7000i

11 | 13

Ordering information

NDP-7512-Z30 PTZ 2MP HDR 30x clear IP66 pendant

PTZ dome camera; 1080 (2MP) HD, 30x, starlight
imaging, H.265, IVA.
Outdoor pendant mount
Order number NDP-7512-Z30 | F.01U.352.678

EWE-AD7IIP-IW 12mths wrty ext Autodome 7000i
Series

12 months warranty extension
Order number EWE-AD7IIP-IW | F.01U.382.507

NDP-7512-Z30C PTZ 2MP HDR 30x clear IP54 in-ceiling

PTZ dome camera; 1080 (2MP) HD, 30x, starlight
imaging, H.265, IVA.
Indoor, in-ceiling mount, clear bubble
Order number NDP-7512-Z30C | F.01U.359.800

EWE-AD7IIP-IW 12mths wrty ext Autodome 7000i
Series

12 months warranty extension
Order number EWE-AD7IIP-IW | F.01U.382.507

NDP-7512-Z30CT PTZ 2MP HDR 30x tinted IP54 in­ceiling

PTZ dome camera; 1080 (2MP) HD, 30x, starlight
imaging, H.265, IVA.
Indoor, in-ceiling mount, tinted bubble
Order number NDP-7512-Z30CT | F.01U.352.677

EWE-AD7IIP-IW 12mths wrty ext Autodome 7000i
Series

12 months warranty extension
Order number EWE-AD7IIP-IW | F.01U.382.507

NDP-7512-Z30K PTZ 2MP HDR 30x clear IK10 pendant

PTZ dome camera; 1080 (2MP) HD, 30x, starlight
imaging, H.265, IVA.
Outdoor pendant mount, IK10
Order number NDP-7512-Z30K | F.01U.352.676

EWE-AD7IIP-IW 12mths wrty ext Autodome 7000i
Series

12 months warranty extension
Order number EWE-AD7IIP-IW | F.01U.382.507

Fig.3:

AUTODOME 7000 series Optional Mounts

1 Pole (Mast) Mount 4 Roof Mount
2 Corner Mount 5 Roof Mount Adapter
3 Pipe Mount 6 Power Supply for Pipe

and Roof Mounts

Accessories

NPD-6001B Midspan, 60W, single port, AC in

60 W indoor midspan for cameras without illuminators
Order number NPD-6001B | F.01U.392.458

F.01U.347.358

VG4-A-PSU0 Power supply, 24VAC

Power supply, 24VAC input, for a PTZ camera in the
AUTODOME Series. White, aluminum enclosure with
cover, rated IP66 and IK 08. 100W output. Optional trim
skirt (sold separately).
Order number VG4-A-PSU0 | F.01U.261.376

VG4-A-PSU1 PSU, 120VAC, for AUTODOME, MIC7000

Power supply for AUTODOME 7000, MIC IP cameras
without illuminators.
120VAC in, 24VAC out
Order number VG4-A-PSU1 | F.01U.081.593

F.01U.009.667 F.01U.261.377

Video - AUTODOME IP starlight 7000i

12 | 13

VG4-A-PSU2 Power supply, 230VAC, AUTODOME,
MIC7000

Power supply for AUTODOME 7000, MIC IP cameras
without illuminators.
230VAC in, 24VAC out
Order number VG4-A-PSU2 | F.01U.096.639

F.01U.009.668 F.01U.097.433 F.01U.081.604
F.01U.261.378

VGA-SBOX-COVER Cover for AUTODOME power supply
box

Cover for AUTODOME Power Supply Boxes, white
Order number VGA-SBOX-COVER | F.01U.010.505

F.01U.247.808

VG4-SFPSCKT ETHERNET TO SFP INTERFACE KIT

Ethernet media converter video transmitter/data receiver
fiber optic kit for AUTODOME cameras, for MIC-IP-PSU
for MIC analog cameras and for the Surveillance cabinets
(NDA-U-PA0, NDA-U-PA1 and NDA-U-PA2).
Order number VG4-SFPSCKT | F.01U.142.529

SFP-2 Fiber module, multimode, 1310nm, 2LC

SFP Fiber Optic Module, 2km (1.2miles), 2LC
connectors.
Multi-mode
1310 mm
Order number SFP-2 | F.01U.136.537

SFP-3 Fiber module, single-mode, 1310nm, 2LC

SFP Fiber Optic Module, 20km (12.4miles), 2LC
connectors.
Single-mode
1310nm
Order number SFP-3 | F.01U.136.538

SFP-25 Fiber module, 1310/1550nm, 1SC

SFP Fiber Optic Module, 2km (1.2miles), 1SC
connector
Multi-mode
1310/1550nm
Order number SFP-25 | F.01U.136.541

SFP-26 Fiber module, 1550/1310nm, 1SC

SFP Fiber Optic Module, 2km (1.2miles), 1SC
connector
Multi-mode
1550/1310nm
Order number SFP-26 | F.01U.136.542

VG4-A-PA0 Pendant arm, power box, 24VAC,
AUTODOME

Pendant arm mount with power supply box for an
AUTODOME Series camera, no transformer, white
Order number VG4-A-PA0 | F.01U.096.637

F.01U.009.671 F.01U.081.560 F.01U.097.435
F.01U.261.373

VG4-A-PA1 Pendant arm, power box, 120VAC,
AUTODOME

Pendant arm mount with power supply box for an
AUTODOME Series camera with a 120 VAC transformer,
white
Order number VG4-A-PA1 | F.01U.081.571

F.01U.009.663 F.01U.261.374

VG4-A-PA2 Pendant arm, power box, 230VAC,
AUTODOME

Pendant arm mount with power supply box for an
AUTODOME Series camera with a 230 VAC transformer,
white
Order number VG4-A-PA2 | F.01U.081.582

F.01U.009.664 F.01U.096.638 F.01U.097.431
F.01U.261.375

VGA-PEND-ARM Pendant arm with wiring, for
AUTODOME

Compatible with an AutoDome Series pendant housing
Order number VGA-PEND-ARM | F.01U.261.947

F.01U.247.810

VGA-PEND-WPLATE Mounting plate for VGA-PEND­ARM

Mounting plate for VGA-PEND-ARM, compatible with an
AutoDome Series camera
Order number VGA-PEND-WPLATE | F.01U.247.809

VGA-ROOF-MOUNT Roof parapet mount for
AUTODOME series

Roof parapet mount, white
VG5-6xx/7xxx cameras require VG4-A-9543 Pipe Mount
(sold separately).
NEZ-5130-/NEZ-5230- cameras require NDA-ADPTR­NPTMET (sold separately)
Order number VGA-ROOF-MOUNT | F.01U.247.811

LTC 9230/01 Parapet roof mount adapter

Flat Roof Mount Adapter for mounting a unit in an
upright position on a flat surface.
Order number LTC 9230/01 | F.01U.503.630

VG4-A-9541 Pole mount adapter

Pole mount adapter for an AUTODOME pendant arm or a
DINION imager, designed for poles with a diameter of
100‑380mm (4‑15in.), white
Order number VG4-A-9541 | F.01U.123.433

VG4-A-9542 Corner mount adapter for AUTODOME

Corner mount adapter for an AUTODOME pendant arm
or a DINION imager
Order number VG4-A-9542 | F.01U.123.434

VG4-A-9543 Pipe mount for AUTODOME , white

Pipe mount, white, for an AutoDome Series pendant
housing
Order number VG4-A-9543 | F.01U.009.673

VGA-IC-SP Suspended ceiling support kit,7"

Suspended ceiling support kit for dome cameras.
Aperture Ø177mm (Ø7in). Maximum supported weight

11.3kg (25lb).
Order number VGA-IC-SP | F.01U.245.271

VGA-BUBBLE-PCLA Bubble, pendant, clear

Low-impact acrylic bubble
Order number VGA-BUBBLE-PCLA | F.01U.247.818

VGA-BUBBLE-PTIA Bubble, pendant, tinted

Low-impact acrylic bubble
Order number VGA-BUBBLE-PTIA | F.01U.247.820

VGA-BUBLRG-CCLA Bubble, in-ceiling, large, clear

High-resolution bubble for AUTODOME in-ceiling
cameras, clear
Order number VGA-BUBLRG-CCLA | F.01U.283.457

Video - AUTODOME IP starlight 7000i

VGA-BUBHD-CTIA Bubble, in-ceiling, tinted

High-resolution acrylic bubble for AUTODOME HD in­ceiling cameras, tinted
Order number VGA-BUBHD-CTIA | F.01U.281.738

VGA-BUBBLE-IK10 Bubble, pendant, IK10-rated

IK10-rated bubble qualified for use with AUTODOME
7000 HD cameras with pendant housings
Order number VGA-BUBBLE-IK10 | F.01U.315.882

Software Options

MVC-CT-PTZ License for PTZs

CameraTrainer license for Intelligent Video
Analytics7.10 on PTZ cameras.
Free-of-charge software module.
Order number MVC-CT-PTZ | F.01U.365.079

MVS-FCOM-PRCL License key for serial protocol

Serial Protocol Software License (e-license) for IP
Cameras
Order number MVS-FCOM-PRCL | F.01U.314.101

MVS-FNTCIP NTCIP for moving cameras

NTCIP license for moving cameras
Available in NAM region only.
Order number MVS-FNTCIP | F.01U.329.682

13 | 13

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
[e-mail]
emea.boschsecurity.com

Data subject to change without notice | 57623773195 | V9 | November 03, 2020 © Bosch Security Systems 2020

Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.boschsecurity.com

Bosch Security Systems, LLC
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia