IMPORTANT: When ordering parts, please provide the model, gas type
and serial number of the oven. The identification plate is located on
the left side of the combustion compartment and, also, above the control
panel under the ledge.
þ ASAP Distributor Required Stocking Parts
t Doors Are Not Returnable
* Item Is Too Large For UPS
MT3240 E & G
September 10, 2001
2
ELECTRICAL COMPONENTS
Ref. Part
No. No. Description
1 þ M6474 Computer Control Kit, Closed Loop SB
FW525 Computer Control Kit, Closed Loop SB
Recon.
M7202 Conversion Kit, Open Loop to Closed Loop
þ M10049 Decal & Control Membrane SB
(for M6474/FW525)
2 M3175 Lexan Decal only, SB
M9692 DAC Board (for M6474/FW525)
þ M5635 Computer Control Kit, Open Loop TB
M10034 Decal & Control Membrane (for M5635) TB
M4400 Lexan Decal only, TB
M10197 Remote Mounting Support Kit, for Computer
(sgl, dbl, & tpl ovens) Replaces M3314
M9644 Probe Kit 20"
(Replaces M7427 FOR THIS OVEN ONLY)
3 þ M3352 Transformer, 115V to 24 V
M10035 Silicone Compound (for cables)
þ M3347 Cable, Computer Control, 25 Pin, 10 Foot
þ M3348 Cable, Computer Control, 9 Pin, 10 Foot
M3490 Cable, Computer Control, 25 Pin, 50 Foot
M3491 Cable, Computer Control, 9 Pin, 50 Foot
M9262 Jack Screw (for harness mounts)
þ M3349 Harness, Inter-Connecting DC Drive,
3 Wire, w/socket (9 pin)
þ M7237 Harness, Relay Board, w/socket (25 pin)
M9985 Relay Harness & Jack Screw Kit (25 pin)
þ M0984 Pick-Up, Single Pulse PV-2
4 þ 22672 Relay, Control (for M6474)
5 þ 20349 Buzzer, 115V
6 þ 36066 Thermostat, High Limit Kit (Manual Reset)
M10543 Emergency Stop Switch Kit (Remote Only)
Replaces M3296, M0152, M3297
7 þ M1362 Snap Disc, 140/20F, 2 Pole
(Control Compartment)
þ M2453 Snap Disc, 140/20F, 3 Pole
(Blower Compartment)
þ 20162 Fuse, 10 AMP, Class G (Qty 2)
8 þ M0158 Fuse Holder (Qty 2)
M4176 Element Assy., 208V
M4177 Element Assy., 240V
M6894 Element, Individual, 208V
M6895 Element, Individual, 220V
M6896 Element, Individual, 240V
32 þ 22593 Transformer, 208/230V to 115V
9 M3714 Terminal Block, 3 Pole
M0593 Terminal Block, 2 Pole
31 M4667 Contactor, 100 AMP, 120V, 3 Pole
(Elements)
ELECTRICAL COMPONENTS - Cont'd
Ref. Part
No. No. Description
10 þ M0708 Contactor, 120V, 3 Pole (Blower Motor)
11 þ M2469 Fan, Axial 115V, 110 CFM 4-1/2"
(4 per oven)
22718 Guard & Hardware, Fan (Qty 2)
M0572 Cord, Axial Fan 30" Power
M1694 Cord Set & Plug Assy. (10 Feet)
M0772 Receptacle, Twist Lock
CONVEYOR COMPONENTS
Ref. Part
No. No. Description
21926 Belt, Wire S/S 32" SB (Per Foot)
(Total Length 13 FT)
23112 Belt, Wire S/S 15.75" TB (Per Foot)
(Total Length 13 FT)
M4132 Tensioner Assy., Belt
12 þ FW502 Digital Speed Control Board, Bodine Recond
NOTE: M2379 is no longer available
M10099 Conveyor Motor & Control Kit, Brushless
(for Computerized Ovens) *See Note
12 M10081 Conveyor Control, Brushless *See Note
15 M10082 Conveyor Motor, Brushless *See Note
*NOTE: You must install the Brushless Kit BEFORE
you purchase the new brushless motor or
control separately.
þ M6192 Bracket (For M10082)
13 þ M2254 Fuse, Line, Bodine Board, 5 AMP, 125V
14 þ M9787 Fuse, Armature, 250 MA, 250V
(Replaces part M2316, DOMESTIC ONLY)
þ M2500 Brush Set, Bodine
þ 21152 Drive Chain
16 * M4014 Conveyor Assy., Drive SB (Before 4/95)
* M6134 Conveyor Assy., Drive SB (After 4/95)
* M4015 Conveyor Assy., Idle SB (Before 4/95)
* M6135 Conveyor Assy., Idle SB (After 4/95)
* M6176 Conveyor Assy., Drive TB
* M6177 Conveyor Assy., Idle TB
17 M0122 Bushing, Conveyor Drive
18 þ M0109 Sprocket, Motor Drive, 12 Tooth (Qty 1)
19 þ M0110 Sprocket, Conveyor Drive, 15 Tooth (Qty 1)
20 þ M0108 Sprocket, Conveyor Belt (Qty 14)
þ M0112 Masterlink