Blodgett CONVEYOR OVEN REPLACEMENT PARTS MT1828E User Manual

542.68 Kb
Loading...

MT1828E & MT1828G

CONVEYOR OVEN

REPLACEMENT PARTS LIST

EFFECTIVE JUNE 13, 2001

BLODGETT OVEN COMPANY, 50 Lakeside Avenue, Burlington, Vermont 05401 USA

Telephone: (802) 860-3700 (800) 331-5842 Fax: (802) 860-3732 www.blodgett.com

Superseding All Previous Parts Lists.

The Company reserves the right to make substitution in the event that items specified are not available. www.blodgett.com

ERRORS: Descriptive and/or typographic errors are subject to correction.

IMPORTANT: When ordering parts, please provide the model, gas type and serial number of the oven. The identification plate is located on the left side of the combustion compartment and, also, above the control panel under the ledge.

;ASAP Distributor Required Stocking Parts

MT1828E & MT1828G

June 13, 2001

2

ELECTRICAL COMPONENTS

Ref.

 

Part

 

 

 

No.

 

No.

Description

1

; M6474

Computer Control Kit,Closed Loop SB(Qty 1)

1

; FW525

Computer Control Kit,Closed Loop SB(Qty 1)

 

 

 

(Reconditioned)

 

 

M9692

DAC Board (for M6474)

 

 

M10049

Decal & Control Membrane

 

 

 

(for M6474/FW525) SB

 

 

M3175

Lexan Decal only, SB

60

 

M10197

Remote Mounting Support Kit, for Computer

 

 

 

(sgl, dbl & tpl ovens) Replaces M3314

2

; M7427

Probe, Temperature RTD, 500 OHMS 6"

 

 

 

(Qty 1) (Before 7/15/99 or S.N. 071599GE066T)

 

 

Note:

Use this probe if oven has not been

 

 

 

 

 

burner retrofitted.

14"

 

 

M9607

Probe, Temperature RTD, 500 OHMS

 

 

 

(Qty 1) (After 7/15/99 or S.N. 071599GE066T)

 

 

Note:

Use this probe if oven has been

 

 

 

 

burner retrofitted.

 

 

 

M7202

Conversion Kit, Open to Closed Loop(Qty 1)

 

 

M10035

Silicone Compound (for cables)

 

 

M3347

Cable, Computer Control, 25 Pin, 10' (Qty 1)

 

 

M3348

Cable, Computer Control, 9 Pin, 10' (Qty 1)

 

 

M3490

Cable, Computer Control, 25 Pin, 50' (Qty 1)

 

 

M3491

Cable, Computer Control, 9 Pin, 50' (Qty 1)

 

 

M5661

Bracket Assy, Cable Clamp

 

 

M9262

Jack Screw (for harness mounts)

 

 

M3349

Harness, w/socket, Inter-Connecting DC

 

 

 

Drive, 3-Wire (For 9 Pin) (Qty 1)

 

 

M7237

Harness, w/socket, Relay Board

 

 

 

(For 25 Pin) (Qty 1)

 

 

M9985

Relay Harness & Jack Screw Kit (25 pin)

 

; M0984

Pick-Up, PV-2 (Qty 1)

 

; M7236

Board, Relay/Transformer (Qty 1)

3; 22672 Relay, Control (Qty 4)

4; M3352 Transformer, 120V to 24V (Qty 1)

522593 Transformer, 208/230V to 115V (Qty 1)

37 ; 24356

Transformer, 120V to 24V (Qty 1)(for M7885)

6; 20349 Buzzer, 120V (Qty 1)

7; 36066 Thermostat, High Limit Kit (Qty1) M9867 Probe Well Assy

8; M1362 Snap Disc, L140-20F, 2 Pole SPST

(Control Compartment)

9 ; M2453 Snap Disc, L140-20F, 3 Pole SPDT

(Blower Compartment)

10; M6044 Snap Disc, L110-20F, 3 Pole SPDT (Computer)

;M0152 Contact, Emergency Stop Switch (Qty 1)

;M3296 Activator, Emergency Stop Switch

(Mushroom Shape) (Qty 1)

; M3297 Nameplate, Emergency Stop (Qty 1)

ELECTRICAL COMPONENTS - Cont'd

Ref.

Part

 

No.

No.

Description

11

; 11204

Terminal Block, 3 Pole (Qty 1) Gas

98M3714 Terminal Block, 3 Pole (Qty 1) Elec

99M3715 Terminal Block, 1 Pole (Qty 1) Elec (Ground)

12; M0593 Terminal Block, 2 Pole (Qty 1) or (CE Qty 2)

13; M2469 Fan, Axial 110 CFM 4-1/2" (Qty 5)

1422718 Fan Guard & Hardware (Qty 2)

M0572 Cord, Axial Fan 30" Power (Qty 5)

;M6576 Plate Assy., Control MT1828E

M6578 Plate Assy., Control MT1828G

M1694 Cord Set & Plug Assy., 10' MT1828G

M7955 Cord Set & Plug Assy., 10' MT1828E

M0772 Receptacle, Twist Lock

15M0708 Contactor, 3 Pole, 120V Coil (Fan)

16M7159 Contactor, 3 Pole, 30 AMP, 120V 3PH

(Element)

M6868 Contactor, 2 Pole, 60 AMP, 120V 1PH (Element)

M4988 Fuse, 5 AMP, 300V, SC-5 (Qty 2)

17M0158 Fuse Holder (Qty 2) Elec Ovens

M8559 Conv Kit, 208V 3PH to 240V 1PH

18M6097 Element Assy., 208V, 3 PH (Qty 1)

18

M6099

Element Assy., 208V, 1 PH (Qty 1)

18

M6101

Element Assy., 220V (Qty 1)

18

M6098

Element Assy., 240V, 3 PH (Qty 1)

18

M6100

Element Assy., 240V, 1 PH (Qty 1)

18M6102 Element Assy., 240V (Qty 1)

M9839 Element, Individual 208V

M9840 Element, Individual 220V

M9841 Element, Individual 240V

1990034 Lug, Grounding (Qty 1) Gas Ovens

M9422 Pressure Switch

M9705 Polyurethane Tubing, used w/pressure switch (Per Foot, Total 3 FT)

M3118 Harness (back of control to motors)

M3120 Harness (Contactor to control box)

JUNE 13, 2001

3

MT1828 E & G

MT1828E DOMESTIC CONTROL PLATE ASSY (M6576)

M1362 8

Snap Disc,

Control

Compartment

20349 6 Buzzer

22672 3 Relay, Control

36066 7 Thermostat, High-Limit

M3352 4 Transformer, 120V-24V

M0593 12

Terminal

Block, 2 Pole

16

M7159

Contactor,

3 Pole

21M10081 or FW502 Conveyor Control

22 M2254 Fuse

23M9787 Fuse

15M0708

Contactor, 3 Pole

22593

Transformer, 208/230V-115V

5

JUNE 13, 2001

4

MT1828 E & G

MT1828G DOMESTIC & GENERAL EXPORT CONTROL PLATE ASSY (M6578)

M1362 8

Snap Disc,

Control

Compartment

20349 6 Buzzer

22672 3 Relay, Control Qty 4

36066 7 Thermostat, High-Limit

M3352 4 Transformer, 120V-24V

M0593 12

Terminal

Block,

2 Pole

21

M10081

 

or FW502

 

Conveyor

 

Control

22 M2254

Fuse

23 M9787

Fuse

15 M0708

Contactor,

3 Pole

45 30851 Ignition

Control: Call Tech Service with Serial # if you need this part # or if oven HAS NOT been burner retrofitted.

103M9529

Ignition Control, Midco Burner/ Direct Spark Units

3724356Transformer,

120V-24V

JUNE 13, 2001

 

 

 

 

5

MT1828 E & G

 

 

 

 

MT1828E & MT1828G DOMESTIC CONTROL BOX

 

 

 

 

 

 

(CONTROL PLATE AND/OR GAS BURNER COMPONENTS NOT SHOWN)

 

 

 

 

 

 

 

 

Elec.

13

M2469

 

 

 

 

 

 

 

 

Axial Fan,

 

 

 

 

 

 

 

 

 

4 1/2"

 

 

 

 

 

M0158

17

Elec.

 

 

 

 

 

 

 

Fuseholder

 

 

 

 

 

 

 

 

 

 

 

M7427

 

 

 

 

 

 

 

 

Probe

2

 

 

 

 

 

 

 

RTD 6"

 

 

 

 

 

 

 

98

 

99

 

 

 

 

 

 

M3714

 

 

 

 

 

 

 

 

 

M3715

 

 

 

 

Terminal

 

 

 

 

 

 

Block, 3

 

Terminal Block,

 

 

 

 

Pole

1 Pole Elec. (Ground)

 

 

 

M2469

Elec.

 

 

 

 

 

 

 

 

 

90034

19

 

 

 

Axial Fan, 4 1/2"

 

 

 

 

 

 

 

 

 

 

FOR INTEGRAL

 

Grounding Lug

 

 

 

 

 

 

 

COMPUTER

 

Gas (Ground)

 

 

 

 

 

 

 

 

ONLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

11204

11

 

 

 

 

 

 

 

Terminal Block, 3 Pole

 

 

 

 

 

 

Gas

 

 

 

 

 

 

 

 

 

 

 

 

24

 

 

 

 

 

 

 

 

M10082

 

 

 

 

 

 

 

Conveyor

 

 

30

 

 

 

 

Motor

 

 

 

 

 

M6808

31

 

 

M6121

 

 

 

Timing

 

 

 

Timing

 

 

 

 

Belt

 

 

32

Pulley

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M6192

 

 

 

 

 

 

 

 

 

Bracket, for Motor

 

 

 

 

 

 

 

 

 

(comes separately)

 

 

+ 10 hidden pages