Blaupunkt Wiesbaden-RCR-148 Owners Manual

Radio / Cassette

Bergamo RCR 148
Montana RCR 148
Wiesbaden RCR 148

Operating instructions

141516

11121318 17

Montana
Wiesbaden

1

2

4

2

6

5

11

7

Fernbedienung RC 06 (Option)
Remote control RC 06 (optional)
Télécommande RC 06 (en option)

9

8

10

Bergamo RCR 148

RCR 148
RCR 148

Telecomando RC 06 (optional)
Afstandsbediening RC 06 (Optie)
Fjärrkontroll RC 06 (Tillval)
Mando a distancia RC 06 (opcional)

4

3

Telecomando RC 06 (opção)

2

Contents

Quick reference ............................ 25

Important notes ............................ 30

Precautions........................................... 30

Traffic safety ......................................... 30

Installation.............................................30

Accessories .......................................... 30

KeyCard theft protection system 31

Operating the unit ................................. 31

Removing the KeyCard ........................ 31

“Training” a second KeyCard/

Replacing a KeyCard............................ 31

Displaying the radio pass data ............. 31

Short Additional Memory (S.A.M.)........ 32

Turn On Message (T.O.M.) .................. 32

Optical indication of anti-theft

protection .............................................. 32

Care of your KeyCard........................... 32

Switching the audio source ........ 32

Radio operation with RDS ........... 33

AF - Alternative frequency.................... 33

REG - regional programme .................. 33

Selecting a waveband

(only Bergamo RCR 148) .....................

Station tuning........................................ 34

Automatic tuning / ....................... 34

Manual tuning with << >>.................. 34

Scrolling through the broadcasting

networks (FM only) ............................... 34

33

Changing the memory bank ................. 34

Storing stations..................................... 34

Automatically storing the strongest

stations with Travelstore....................... 35

Recalling stored stations ...................... 35

Scanning stored stations with

Preset Scan .......................................... 35

Scanning stations with Radio-Scan...... 35

Selecting the seek tuning sensitivity .... 35

Switching from stereo to mono............. 36

Loudness .............................................. 36

PTY – Programme-Type....................... 36

Switching PTY on/off......................... 36

Programme type ................................... 36

Checking the programme type of

the station.......................................... 37

Displaying the selected programme

type.................................................... 37

Selecting a programme type ............. 37

Storing programme types.................. 37

Scanning stations with PTY-SCAN... 37

PTY priority........................................ 38

Receiving traffic programme

stations with RDS-EON................ 39

Traffic announcement priority on/off .... 39

Beep tone ............................................. 39

Switching off the beep tone............... 39

Automatic seek tuning start

(tape operation) .................................... 39

Adjusting the volume for traffic

announcements and the beep tone...... 40

Tape operation ............................. 40

Inserting a tape..................................... 40

Removing a tape................................... 40

Fast Forward/Rewind ........................... 40

Selecting titles with CPS

(Cassette Programme Search)............. 40

Switching the tape side (autoreverse).. 41

Tape equalisation ................................. 41

Scanning cassette titles with SCAN ..... 41

Listening to the radio during fast tape

winding with RM (Radio Monitor) ......... 41

Care notes ............................................ 41

DSC programming ....................... 42

Overview of DSC factory settings ........ 43

Appendix....................................... 44

Specifications........................................ 44

Blaupunkt telephone hotline ................. 44

24

Quick reference

1 Switching on with the buttons:

Press one of the buttons illustrated
here after you have inserted the Key­Card.
The unit will play at the pre-adjusted
volume.

Switch off with the ON button.

Switching on/off with the KeyCard:

When turned on, the set can be
switched off and back on by removing
and re-inserting the KeyCard.

Note:
Be sure to read the information in the
section on “KeyCard theft protection
system”.

Switching on/off via the ignition:

If the equipment has been connected
correspondingly, the set can also be
turned on and off with the vehicle igni­tion.
After the ignition has been switched
off, a double beep tone will remind you

that you should remove the KeyCard
before leaving your vehicle.

Switching on when the ignition is
switched off:

To keep on operating the set when the
ignition is switched off (KeyCard is in­serted), proceed as follows:
Press ON after you hear the double
beep tone.
The unit will turn on.
To prevent the battery from going
dead, the system will turn off automati­cally after it has played for one hour.

2 VOL+ / VOL-

To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set­ting (see chapter “DSC programming”).

3

For instantly muting the volume.
By pressing the

button the volume
can be muted immediately. “MUTE”
will appear in the display.
The function is cancelled by pressing
button or VOL+.

When pressing VOL-, the (mute)
volume will be adopted.
To programme the mute volume level,
proceed as follows:

• Adjust the desired volume.

• Press

for 1 second until you

hear a beep.
Now this volume level is stored as your
mute volume.

4 Rocker switch

Radio operation

/ Station search

Up
Down

<</>> Up/Down in short intervals

(on FM only if AF is off)

On FM only:
<</>> To scroll through the station net-

works when AF is on, e.g.NDR 1, 2,
3, 4, N-JOY.

ENGLISH

25

Tape operation

Remote control

RC 06 (optional)

5 Display

a

/ Title selection (S-CPS)

Up
Down

Fast forward
Fast rewind

Stop function by pressing the opposite key.

Extra rocker switch functions:

Further setting functions with

AUD B
DSC Mode A
PTY @

Condition: The corresponding function
is activated.

Using the remote control you can
execute the same functions as with the
corresponding buttons of the car
stereo.

Exception:
Radio operation

<< Press briefly.

To switch the FM memory bank.

<< Press for approx. 1 sec.

To store the six most powerful sta­tions automatically with Travelstore.

>> To select one of the stations stored

on memory bank I, II or T.

fg

e

dc

b

a) NDR1 NDS - Station name
b) TR 1 - Track (side) 1 of the cas-

c) FM - Waveband
d) 5 - Preset button (1-6)
e) I, II, T - Memory bank I, II or

f) lo - Seek tuning sensitivity
g) AF - Alternative frequency for

h) TP - A traffic station is being

i) TA - Priority for traffic stations
j) LD - Loudness
k) PTY - Programme type function

k

j

i h

sette

Travelstore

RDS operation

received

26

6 KeyCard theft protection system

To operate the set the KeyCard must
be inserted first.

KeyCard

Insert KeyCard

When the KeyCard tongue is protrud­ing out of the unit, insert the KeyCard
with the contact area facing up into
the slot in the middle of the area.
If necessary, pull the KeyCard forward.
Be sure to read the information in the
section on “KeyCard theft protection
system”.

Flashing KeyCard tongue

When the radio is turned off and the
KeyCard removed, the KeyCard
tongue can be programmed to flash for
optical theft protection.
For more information see the section
on “DSC programming”.

T

7 FM

(Wiesbaden RCR 148,

Montana RCR 148)

BND

(Bergamo RCR 148)

For selection of the FM memory banks
I, II and T (Travelstore).

To switch over:

Press button repeatedly.
The selected memory bank will appear
in the display.

Bergamo RCR 148:

Additional selection of medium- and
long-wave stations, provided that “AM
ON” has been adjusted in the DSC
menu.

Travelstore

To store and recall the six most power­ful stations with Travelstore.
To store: Press button for approxi­mately 1 sec. until you hear a beep
and “T-STORE” appears in the display.
To recall: Select the memory bank “T”
and press the corresponding preset
button (1-6) briefly.

8 AF

Alternative frequency during RDS op-

eration:
When “AF” lights up in the display, the
system will automatically seek a fre­quency offering better reception of the
same RDS programme.
AF on/off: Press AF briefly.

Regional function on/off:
Press the AF button for approximately
1 sec. until you hear a beep. “REG­ON” or “REG-OFF” will appear in the
display (see chapter REG - regional
programme).

9 TA (priority for traffic announcements)

When “TA” lights up in the display, the
system will play traffic stations only.
Priority on/off: Press TA.

: 1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations for each of
the memory banks I, II, T, M and L.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play after
the muting and you hear a beep.
To recall a station: Select the desired
memory bank and press the relevant
preset button briefly.

ENGLISH

27

Extra function of preset buttons

To store and recall a PTY programme
type.
When PTY is active (“PTY” lights up in
the display), you can store and recall
one programme type on/from each
preset button on FM.

; SRC (Source)

You can switch between the radio and
tape audio sources (if a tape is insert­ed).

< lo

To switch the seek tuning sensitivity
level:
Press button briefly.
If “lo” is displayed, the radio will only
pick up strong, local stations (normal
sensitivity).
If “lo” does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).

Extra function of lo button:

To switch between mono and stereo
reception:
Press button for approximately 1 sec.
(beep).
The selected condition will be briefly
displayed.

/

=

To switch the tape side: Press briefly.
To eject the tape: Press for approxi­mately 1 sec.

Extra function

Frequency display during radio opera­tion:
Press button briefly.
The frequency will be briefly displayed.

> Cassette loading slot

Insert the tape with side A or 1 facing
up, the open side showing to the right.

? SC

Radio operation

Scan

The scan function cannot be started
unless PTY has been switched off
(“PTY” does not light up in the
display).
Press SC briefly ­The scanned frequency or station
name will flash in the display. The dis­play will show “FM SCAN” or
“AM SCAN” while searching for the
next station. The unit will scan all of
the receivable stations of the
selected memory bank/waveband.

/

Preset Scan

Preset Scan cannot be started unless
PTY has been switched off (“PTY”
does not light up in the display).
Press SC for approximately 1 second
until you hear a beep.
“SCAN” will alternate with the name or
frequency of the scanned station in the
display.
The unit will scan all of the stations
stored on the preset buttons of the se­lected memory bank/waveband.

To stop Scan / Preset Scan:
Press SC once again.

PTY-Scan

PTY-Scan cannot be started unless
PTY is switched on (“PTY” lights up in
the display).
All of the stations for the programme
type selected will be scanned briefly.

Tape operation

Cassetten-Scan

Press SC.
“CC SCAN” will appear in the display.
All cassette titles will be scanned brief­ly.
To stop cassette scan:
Press SC once again.

28

@ PTY (Programme Type)

In the PTY mode, the preset buttons
become programme type buttons. With
every preset you can select one pro­gramme type, such as for example
NEWS, SPORT, POP MUSIC, EDU­CATE, etc. With the << >> rocker
switch, it is possible to recall all of the
PTY programme types as long as the
PTY function has been activated
(“PTY” will light up in the display).

A DSC (Direct Software Control)

Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer­ences. See chapter “DSC program­ming” for more information.

B AUD

Adjusts the treble and bass frequen­cies.

Press AUD once and use the rocker
switch to adjust the settings.

Treble +
Treble –
Bass –
Bass +

Setting the balance (left/right) and
the fader (front/rear).

Press AUD twice:

Fader front
Fader rear
Balance left
Balance right

The settings selected will appear in the
display. The last setting will be stored
automatically.
Switching AUD off: Press the button
once again.
If no changes are made within 8 sec­onds, the display will switch back to
the previous condition.

Extra function AUD

Loudness - When listening at a low
level, the Loudness function creates a
more natural sound by boosting
the low frequency range.
Loudness on/off: Press AUD for ap­proximately 1 sec.
“LD” lights up in the display if the
Loudness function is switched on.
Please refer to chapter “DSC program­ming” for more information on how to
program the Loudness boost.

ENGLISH

29