Operating instructions
Radio / Cassette
Lübeck C30
Luxembourg C30
Bitte aufklappen
Open here
Ouvrir s.v.p.
Aprite la pagina
Openslaan graag
Öppna
Por favor, abrir
Favor abrir
2
DEUTSCH
ENGLISH
31
2
5
4
6
111213
987
10
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
3
3
CONTROLS
1 FM button – selects the FM
memory (on the Lübeck C30)
FMT button – selects the FM
memory and activates the
Travelstore function (on the
Luxembourg C30)
2 Volume control
3 ON button – switches the unit
on/off
4 RDS button – switches the RDS
function on/off
5 M•L – selects the MW and L W
frequency ranges (on the
Luxembourg C30)
TS – activates the Travelstore
function (on the Lübeck C30)
6 Cassette compartment
7 Cassette eject
FF button – fast forward
8 GEO button – sets balance and
fader
9 AUDIO button – sets bass and
treble
LD button – switches the
loudness function on/off
: Arrow buttons
; MENU button – opens the basic
settings menu
< Buttons 1 - 5
= TRAFFIC button – activates/
deactivates traffic information
standby
14
CONTENTS
Important information ............ 16
Road safety ................................... 16
Installation ..................................... 16
Accessories .................................. 16
Guarantee ..................................... 16
International telephone hotline........ 16
Theft protection CODE .......... 17
Activating/deactivating the code ....... 17
Entering the code .......................... 17
Code LED ..................................... 17
Switching on/off .................... 18
Volume adjustment ................ 18
Setting the power-on volume ......... 18
Mute setting .................................. 18
Radio mode ............................ 19
Switching on radio mode ............... 19
RDS functions (AF, REG) .............. 19
Switching REG on/off ....................... 19
Switching RDS function on/off .......... 19
Selecting the frequency range /
memory ......................................... 19
Selecting the UKW (FM) memory ..... 19
Selecting the MW and LW memory .. 19
Tuning into a station ....................... 20
Automatic station search mode ......... 20
Sensitivity of the station search
mode............................................. 20
Storing stations ............................. 20
Storing stations manually .................. 20
Storing stations automatically
(Travelstore) .................................. 20
Listening to preset stations ............ 20
Traffic information reception . 21
Switching traffic information priority
on/off ............................................ 21
Setting the traffic announcement
volume .......................................... 21
Cassette mode ....................... 21
Cassette playback ......................... 21
Fast tape winding .......................... 21
Fast forward ..................................... 21
Stopping tape winding ...................... 21
Cassette eject ............................... 21
Traffic information in cassette
mode............................................. 21
Audio settings ........................ 22
Bass settings ................................ 22
Treble settings ............................... 22
Loudness on/off ............................ 22
Volume distribution settings .. 22
Balance settings ............................ 22
Fader settings ............................... 22
Technical data ........................ 23
Amplifier ........................................ 23
Tuner............................................. 23
Cassette ....................................... 23
Installation instructions .......... 84
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
15
15
IMPORTANT INFORMATION
Important information
Before using your car radio, please read
these instructions carefully and familiarise yourself with the unit. Keep these
instructions in your vehicle for later reference.
Road safety
Road safety has priority . Only operate your car radio if the road and
traffic conditions allow you to do so.
Familiarise yourself with the unit before setting off on your journey .
You should always be able hear police, fire and ambulance sirens from
afar. For this reason, you should set
your car radio’s volume to a suitable
level.
Installation
If you want to install your car radio yourself, read the installation and connection instructions that follow these operating instructions.
Accessories
Only use accessories approved by
Blaupunkt.
The purchase receipt is accepted as
proof of guarantee in all cases.
International telephone hotline
If you have any questions regarding the
operation of your car radio or if you require further information, please do not
hesitate to call us!
The information hotline numbers are
printed on the last page of these instructions.
Guarantee
The scope of the guarantee is orientated
around the regulations in force within the
country in which the unit was purchased.
Regardless of what the legal regulations
may stipulate, Blaupunkt provides a
twelve month guarantee.
If you have any questions regarding the
guarantee, please contact your authorised Blaupunkt dealer.
16
THEFT PROTECTION
Theft protection CODE
As a way of protecting your car radio
against theft, the system features a four
digit code. Y ou have to enter this number
every time the unit is disconnected from
your vehicle’s electrical power supply .
As a factory default, the code entry request function is deactivated. However,
you have the option of activating this
function.
The numerical code is printed on the
pass card supplied with your unit.
Note:
Never keep your radio’s pass card in
your vehicle!
Activating/deactivating the code
In order to activate/deactivate the code
request function, proceed as follows:
➮ Press the ON button 3 to switch
off the unit.
➮ Press station buttons 1 and 4 < at
the same time.
➮ Keep these station buttons pressed
while switching the unit on by
pressing the ON button 3.
➮ Keep station buttons 1 and 4 <
pressed until “PUNKT” appears in
the display.
➮ Release the station buttons.
The code request function is now activated.
➮ Follow the same procedure to
deactivate the code request
function.
Note:
To prevent unauthorised persons from
deactivating the code, you will have to
enter the code in order to deactivate the
code request function.
Entering the code
➮ Switch on the unit.
“CODE” appears in the display first of
all and is followed by four zeros.
➮ Keep pressing station button 1 <
until the first number of your code
appears in the display.
➮ Keep pressing station button 2 <
until the second number of your
code appears in the display.
➮ Keep pressing station button 3 <
until the third number of your code
appears in the display.
➮ Keep pressing station button 4 <
until the fourth number of your
code appears in the display.
➮ Once the correct code is displayed,
press the or button :.
Note:
If the code is entered three times incorrectly, you will have to wait for a fixed
time period. “WAIT 1 H” appears in the
display . The unit must remain switched
on during this hour.
Code LED
In order to indicate that the unit is theft
protected, you can set the ON button
3 to flash whilst the unit is switched
off.
➮ Keep pressing the MENU button
; until “LED” appears in the
display.
➮ Press the button : to turn the
LED on (ON) or off (OFF).
➮ Press the MENU button ;.
17
17
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
SWITCHING ON/OFF
VOLUME ADJUSTMENT
Switching on/off
There are various ways of switching the
unit on/off.
● Switching on/off using the vehicle
ignition.
If the unit is correctly connected to the
vehicle’s ignition, it will switch on/off simultaneously with the ignition.
You can also switch the unit on even if
the ignition is off.
➮ To do so, press button 3 until the
unit turns on.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour.
● Switching on/off using button 3.
➮ To switch the unit on press button
3.
➮ To switch the unit off press button
3 for longer than two seconds.
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮ To increase the system volume,
turn the volume control 2 to the
right.
➮ To decrease the system volume,
turn the volume control 2 to the
left.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮ Keep pressing the MENU button
; until “ON VOL” appears in the
display.
➮ Set the power-on volume using the
and buttons :.
If you set the power-on volume to 0:
every time you turn the unit on, the
power-on volume will be the same as
the volume level that was set before the
unit was last switched off.
Risk of serious injury.
If the power-on volume is set to maximum, the volume level can be very
high when the unit is switched on.
If the volume was set to maximum
before the unit was switched off and
the power-on volume is set to 0, the
volume level can be very high when
the unit is switched on again.
18
➮ Press the MENU button ;.
Mute setting
This feature allows you to instantaneously reduce the system volume (mute).
➮ Press button 3.
RADIO MODE
Radio mode
This unit is equipped with an RDS radio
receiver. Nearly all receivable FM stations transmit a signal that not only carries the programme but also additional
information such as the station name.
The station name appears in the display as soon as it is received.
Switching on radio mode
If you are in cassette mode:
➮ Press the cassette eject button 7.
RDS functions (AF, REG)
The RDS functions – AF (Alternative
Frequency) and REG (Regional) – extend your radio’s range of functions.
● AF: If this RDS function is acti-
vated, the unit automatically carries
out a background search for the
best receivable frequency for the
station that is currently set.
● REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
You can use the REG function to
prevent the car radio from switching to alternative frequencies that
are transmitting different programmes.
Note:
REG has to be additionally activated/
deactivated in the unit’s menu.
Switching REG on/off
➮ Keep pressing the MENU button
; until “REG” appears in the
display.
➮ Press the or button : until
“REG ON” or “REG OFF” appears
in the display.
➮ Press the MENU button ; until
the radio display appears in the
display.
Switching RDS function on/off
➮ To use the RDS functions (AF and
REG), press the RDS button 4.
The RDS functions are active when
“RDS” lights up in the display. When the
RDS functions are switched on, “REG
ON” or “REG OFF” appears briefly in
the display.
Selecting the frequency range /
memory
This unit can receive programmes
broadcast over the UKW (FM), MW and
LW frequency ranges (MW and LW are
not available on the Lübeck C30). There
are three preset memory levels for the
FM range and one for each of the MW
and LW ranges. Five stations can be
stored on each memory level.
Selecting the UKW (FM) memory
➮ Press the FMT or FM button 1 to
switch between the various UKW
memory levels.
Selecting the MW and LW memory
➮ Press the M•L button 5 to switch
between the MW and L W memory
levels (not available on the Lübeck
C30).
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
19
19
RADIO MODE
Tuning into a station
Automatic station search mode
➮ Press either the or button :.
The unit tunes into the next receivable
station.
Sensitivity of the station search
mode
You can configure the radio to only receive stations with a strong reception
or to also receive those with a weak reception.
➮ Keep pressing the MENU button
; until “SENS” appears in the
display.
The display shows the currently set
value for sensitivity. “SENS HI” means
that the tuner is highly sensitive. “SENS
LO” means it has a low sensitivity setting. If “SENS LO” is selected, “lo” lights
up in the display .
➮ Set the required sensitivity with the
and buttons :.
➮ Press the MENU button ; until
the radio display appears in the
display.
Storing stations automatically
(Travelstore)
You can automatically store the five stations with the strongest reception in the
region (only FM).
The stations are stored in the FMT
memory .
Note:
Stations that were previously stored in
this memory are deleted in the process.
➮ Keep the FMT button 1 pressed
for longer than two seconds or
briefly press the TS button 5 (only
on the Lübeck C30).
The automatic station storing procedure
begins. “T-ST ORE” appears in the display . After the process is completed, you
will start hearing the station that is stored
in FMT memory location 1.
Listening to preset stations
➮ Select the memory in which the
station was stored.
➮ Press the preset station button of
the station you want to listen to.
Storing stations
Storing stations manually
➮ Select the required memory: FM1,
FM2 or FMT (only for FM).
➮ Tune in the station.
➮ Press one of the station buttons 1-
5 < for longer than one second to
store the station on that button.
20
TRAFFIC INFORMATION CASSETTE MODE
Traffic information
reception
Switching traffic information
priority on/off
➮ Press the TRAFFIC button =.
Priority for traffic announcements is activated when “TRAFFIC” lights up in the
display .
Note:
You will hear a warning sound:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if you leave the reception area of a
traffic information station that you
are tuned into while listening to a
cassette, and the subsequent
automatic search cannot find a
new traffic information station.
● if you tune the radio from a traffic
information station to a station that
does not broadcast traffic information.
If you hear the warning sound, you can
either switch off traffic information priority or tune into a station that broadcasts traffic information.
Setting the traffic
announcement volume
➮ Keep pressing the MENU button
; until “T A VOL” appears in the
display.
➮ Set the required volume using the
and buttons :.
➮ Press the MENU button ; until the
radio display appears in the display .
Cassette mode
Cassette playback
● If there is no cassette inserted in
the unit:
➮ Insert a cassette with the open edge
on the right into the cassette
compartment.
The side of the cassette that is uppermost is then played first of all. A cassette symbol lights up in the display.
Fast tape winding
Fast forward
➮ Press the FF button 7 (Fast
Forward) until it engages.
Stopping tape winding
➮ Slightly press the tape-winding
button 7 and release the button.
Cassette playback will then be continued.
Cassette eject
➮ Press the button 7 to eject the
cassette from the cassette compartment.
Traffic information in cassette
mode
If the “TRAFFIC” function is active (priority for traffic information), the car radio will also be ready to receive traffic
announcements even whilst you are listening to a cassette. If the unit receives
a traffic announcement, cassette playback will be interrupted and you will hear
the traffic announcement. For further
details read the chapter on “Traffic information reception”.
21
21
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
AUDIO SETTINGS AND VOLUME DISTRIBUTION
Audio settings
Bass settings
➮ To set the bass, press the AUDIO
button 9.
“BASS” appears in the display .
➮ Press the or button : to
adjust the bass.
Treble settings
➮ To set the treble, press the AUDIO
button 9.
“BASS” appears in the display .
➮ Press the AUDIO button 9 again.
“TREBLE” appears in the display .
➮ Press the or button : to
adjust the treble.
Loudness on/off
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are increased at low volume
levels.
➮ Press the AUDIO button 9 for
approximately 2 seconds.
LD lights up in the display when loudness is switched on.
Volume distribution
settings
Balance settings
➮ To set the balance, press the GEO
button 8.
“BAL” appears in the display .
➮ Press the or button : to
adjust the balance (right/left).
Fader settings
➮ To set the fader, press the GEO
button 8.
“BAL” appears in the display .
➮ Press the GEO button 8 again.
“FADER” appears in the display.
➮ Press the or button : to
adjust the fader (front/back).
22
Technical data
Amplifier
Output power: 4 x 25 watts sine
in accordance with
DIN 45 324
at 14.4 V
4 x 40 Watt max.
power
Tuner
Frequency ranges:
UKW (FM): 87.5 – 108 MHz
MW : 531 – 1602 kHz
LW : 153 – 279 kHz
FM transmission range:
20 - 16 000 Hz
TECHNICAL DATA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
Cassette
Transmission range:
30 - 18 000 Hz
Subject to changes!
23
23
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço
Tel.: Fax:
Deutschland 0 18 05 00 02 25 0 51 21 49 40 02
Belgique / België 0 25 25 54 44 0 25 25 54 48
France 014 010 70 07 014 010 73 20
Nederland 023 565 63 48 023 565 63 31
Great Britain 018 958 383 66 018 958 383 94
Danmark 44 89 83 60 44 89 86 44
Sverige 08 750 15 00 08 750 18 10
Norge 66 81 70 00 66 81 71 57
Suomi 094 359 91 094 359 92 36
Österreich 01-6 10 39-0 01-6 10 39-391
EÏÏ¿˜
âeská republika 026 130 04 41 026 130 05 14
USA 800-266 25 28 708-681 71 88
Singapore 006 535 054 47 006 535 053 12
Slovensko 042 175 873 212 042 175 873 229
015 762 241 015 769 473
Blaupunkt-Werke GmbH
Bosch Gruppe
11/99 TRO K7/VKD 8 622 402 133
Loading...