Black Magic Design BMD-VHUB/WMSTRCRL Datasheet

Black Magic VideoHub Master Control

Mfr. Part #: BMD-VHUB/WMSTRCRL Our Part #: BMDVHUBWMSTRCRL

When you are working in larger facilities with rack mounted equipment then you
need a serious hardware based control panel! You can choose from two compact,
1 rack unit sized hardware control panels. Videohub Smart Control features 40 crystal
look WRGB illuminated buttons that can be set to any router output. To set the input
to any SDI equipment

now just requires a single button press! Videohub Master Control allows direct button
entry or scrolling using the spin knob to access any source or destination, even on
the largest Videohub router. Simply type in the label, or scroll the knob! You can see
the source and destination on the built-in LCD that features beautiful anti aliased
fonts for an extremely attractive user experience!

Videohub Master Control lets you scroll through your sources and destinations using
the spin knob control or direct entry via the buttons!

Easy to Use

Videohub control panels are incredibly easy to use! Simply install Videohub Master
Control under a monitor, then the output of the router you have connected to that
monitor can be set to a different source each time a different button is pressed.
Thats a "cut-bus" style of router control and is extremely fast to use! Just punch along
the buttons to look at anything on your router. Install under broadcast decks or edit
suites so you can set the video input the same way. If you want full control of every
crosspoint on your router from a single control panel, then Videohub Master Control
simply allows you type in the cross-point directly or even easier, just spin the knob
and see all your sources and destinations scroll by! You can even set to use a take
button! It's just as simple on your Mac or PC where you can also setup simple graphic
buttons for the simple and elegant router panels on your computer!

Easy to Install

No router panel is so easy to install! You can customize buttons, sources and
destinations using the easy to use Windows and Mac software included with each
Videohub control panel. To setup the panel, just connect to the built in USB
connection and then run the software! You can select where the Videohub is on
your network, as well as how many destinations you want on the panel. You can
even select the backlighting brightness, as well as if you want a "take" button!

Connects via Ethernet

Videohub Master Control uses standard ethernet networking so you can simply plug
into the existing computer network. If you want to use your Videohub in mission
critical environments, you can even connect Videohub control panels to routers via
a dedicated ethernet switch. Videohub Master Control feature power over ethernet
so if used with an ethernet switch that includes power over ethernet support, then no
power supply is required. For non powered ethernet switches, we also included a
power supply with international power socket adapters. Videohub hardware control
panels also include loop through ethernet connections, perfect for looping to other
control panels or computers! You can chain dozens of control panels so you save
hundered's on ethernet cabling.