Page 1
Dimensions
115.0 mm (4.53”)
70.0 mm (2.75”)36.5 mm (1.43”)
28.5 mm (1.12”)
AP44 / IS42 / Triton²
INSTALLATION GUIDE
118.0 mm (4.64”)
Parts included
1. 1 x Display unit + Removable bezel
2. 1 x Micro-C Drop cable - 0.6 m (2’)
3. 1 x Micro-C T-Connector
4. 4 x Mounting screws
5. 1 x Suncover
6. Mounting template
7. Screw jig
7
48.5 mm (1.90”)*
*AP44 only
1
AP44
IS42 / Triton²
For product manuals, technical specifications,
certificates and declarations,
refer to the product website:
www.simrad-yachting.com
2
3
4
5
AP44
6
IS42 / Triton²
www.bandg.com
*988-11229-001*
Page 2
Mounting
5.0 mm (0.19”)
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
* Caution: Maximum driver head width
System wiring example
Simrad B&G
Power
COMPASS
IS42
INSTRUMENT
DISPLAY
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive cable
5
RUDDER
FEEDBACK
4
1 NMEA 2000 Backbone
2 Micro-C Drop cable
3 Micro-C Power cable
4 Micro-C T-Joiners
5 Micro-C Terminator, 120 Ohm
6 Drive cable
DRIVE UNIT
AUTOPILOT
12/24V DC
T
6
AP44
AUTOPILOT
CONTROLLER
OP12
AUTOPILOT
CONTROLLER
2
1
SENSOR
3
GPS
12V DC
SPEED / DEPTH
SENSOR
MASTHEAD
UNIT
T
AUTOPILOT
12/24V DC
Power
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive cable
5
T
RUDDER
FEEDBACK
DRIVE UNIT
6
Triton²
AUTOPILOT
CONTROLLER
GPS
SENSOR
MASTHEAD
UNIT
COMPASS
Triton²
INSTRUMENT
DISPLAY
T
2
4
1 NMEA 2000 Backbone
2 Micro-C Drop cable
3 Micro-C Power cable
4 Micro-C T-Joiners
5 Micro-C Terminator, 120 Ohm
6 Drive cable
1
3
12V DC
SPEED / DEPTH
SENSOR
Loading...