B&G H1000 NMEA User Manual

univers al interface bo x

installation

IS-2509-02

CE Certification:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference, the user is encouraged to try to correct the interference by relocating the equipment or connecting
the equipment to a different circuit. Consult an authorised dealer or other qualified technician for additional help
if these remedies do not correct the problem.

This device meets requirements for CFR47 Part 15 of the FCC limits for Class B equipment.

The h1000 meets the standards set out in European Standard EN 60945: 1997 IEC 945: 1996 for maritime
navigation and radiocommunication equipment and systems.

trademark

All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means
including photocopying and recording, without the express written permission of B&G.

Information in this document is subject to change without notice. B&G reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organisation of such
changes.

technical specifications

Dimensions: 70mm x 135mm x 35mm

Power Supply: 12V dc nominal (10V to 16V) via Fastnet2

Current Consumption: 50mA typical

Operating Temperature range: 0°C to +55°C

Storage Temperature range: -25°C to +70°C

Hum idity: Up to 95% R H