BELDEN 49153A Technical Data

49153A Molded Cable Assemblies - DIN Cable Assembly

3

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

5-position shielded DIN, used where a shielded conductor is desired and as a low cost alternative to a D-Sub, PVC insulation, foil plus braid
shield, straight handle, PVC jacket.

PHYSICAL CHARACTERISTICS:
CONDUCTOR:

Number of Conductors 5
Total Number of Conductors 5
Number of Pins 5
AWG 26
Stranding 19x38
Conductor Diameter .020 in.
Conductor Material TC - Tinned Copper

INSULATION:

Insulation Material PVC - Polyvinyl Chloride
Nom. Insulation Wall Thickness 0.014 in.

OUTER SHIELD:

Outer Shield Trade Name Beldfoil®
Outer Shield Type Tape/Braid
Outer Shield Material :

Layer Number Trade Name Type Material % Coverage (%)

1 Beldfoil® Tape Aluminum Foil-Polyester

Tape

2 Braid TC - Tinned Copper 90

Outer Shield %Coverage 100 %

OUTER SHIELD DRAIN WIRE :

Outer Shield Drain Wire AWG 26
Outer Shield Drain Wire Stranding 19x38
Outer Shield Drain Wire Conductor Material TC - Tinned Copper

OUTER JACKET:

Outer Jacket Material PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness 0.037 in.

100

Page 1 of

49153A Molded Cable Assemblies - DIN Cable Assembly

3

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .231 in.

ASSEMBLY DIMENSIONAL CHARACTERISTICS:

Assembly Dimensional Length 10 ft.

CONNECTOR CHARACTERISTICS:

FIRST END :

Connector Characteristics - First End Connector Type DIN
Connector Characteristics - First End # of Connector

Contacts/positions
Connector Characteristics - First End Connector

Gender
Connector Characteristics - First End Connector

Shielding Type
Connector Characteristics - First End Overmold Type 5 Position DIN with Flex Tail
Connector Characteristics - First End Overmold

Compound Material
Connector Characteristics - First End Overmold Color Black

5

Male

Metal Backshell

PVC

SECOND END :

Connector Characteristics - Second End Connector
Type

NOT TERMINATED :

Connector Characteristics (not Terminated) Jacket
Removal Dimension

Connector Characteristic (not terminated) Drain Wire
Solder Dip

Wiring Shield to Connector Shell

WIRING DIAGRAM:

Wiring Diagram Color Code Chart :

Number Color

1 Brown
2 Red
3 Orange
4 Yellow
5 Green

MECHANICAL CHARACTERISTICS:

UL Temperature Rating 80°C (UL AWM Style 2464)

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

No Connector

1 +/- .125 in.

.25 +/- .125 in.

NEC/(UL) Specification CM (cable only)
AWM Specification UL Style 2464 (300 V 80°C) (cable only)

APPLICABLE STANDARDS:

Page 2 of