Beko WTE10744XDOS1 Datasheet
Supplier’s name or trade mark:
Beko
Supplier’s address :
Arctic S.A Gaesti, Dambovita, 13 Decembrie Street, No 210, Romania
Model identifier:
General product parameters:
Parameter Value
Rated capacity (kg)
EEI
w
Washing efficiency index
Energy consumption in kWh per cycle,
based on the eco 40-60 programme.
Actual energy consumption will depend
on how the appliance is used.
10,0
59,5
1,04
0,588
WTE10744XDOS1 7161144300
Parameter Value
Dimensions in cm 60
Energy efficiency class
Rinsing effectiveness (g/kg)
Water consumption in litre per cycle,
based on the eco 40-60 programme.
Actual water consumption will depend
on how the appliance is used and on the
hardness of the water.
Height
Width
Depth
84
64
B
4,9
43
Maximum temperature inside the
treated textile (°C)
Spin speed (rpm)
Programme duration (h:min)
Airborne acoustical noise emissions
in the spinning phase (dB(A) re 1 pW)
Rated
capacity
Half
Quarter
Rated
capacity
Half
Quarter
Rated
capacity
Half
Quarter
75
35
31
25
1400
1400
1400
3:58
2:59
2:59
Remaining moisture content (%)
Spin-drying efficiency class
Type
Airborne acoustical noise emission
class (spinning phase)
Rated
capacity
Half
Quarter
B
Free-Standing
B
53
53
54
Off-mode (W)
Delay start (W) (if applicable)
Minimum duration of the guarantee offered by the supplier :
0,50
4,00
This product has been designed to release silver ions
during the washing cycle
Standby mode (W)
Networked standby (W) (if applicable)
24 months
NO
0,50
2,00
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU)
2019/2023 is found:
http://support.beko.com
Loading...