Beko EV6600 User manual

EV6600

Washing Machine

Perilica rublja

Mašina za pranje veša

1 Important safety instructions		• Use detergents, softeners and supplements
This section contains safety instructions that will		suitable for automatic washing machines only.
help protect from risk of personal injury or property		• Follow the instructions on the textile tags and
damage. Failure to follow these instructions shall		on the detergent package.
void any warranty.		• The product must be unplugged during
General safety		installation, maintenance, cleaning and repairing
• 8 years and older children and people with		procedures.
		• Always have the installation and repairing
reduced physical, sensory, and mental abilities
		procedures carried out by the Authorized
as well as unskilled or inexperienced persons
		Service Agent. Manufacturer shall not be
can use this appliance provided that they are
		held liable for damages that may arise from
supervised and instructed on safe use of the
		procedures carried out by unauthorized
appliance as well as to the related dangers.
		persons.
Children should not play or tamper with the
		Intended use
appliance. Cleaning and user maintenance
should never be performed by children unless		• This product has been designed for domestic
supervised by a responsible adult.		use. It is not suitable for commercial use and it
• Never place the product on a carpet-covered		must not be used out of its intended use.
floor; Otherwise, lack of airflow beneath the		• The product must only be used for washing
machine will cause electrical parts to overheat.		and rinsing of laundry that are marked
This will cause problems with your product.		accordingly.
• Do not operate the product if the power cable		• The manufacturer waives any responsibility
/ plug is damaged. Call the Authorized Service		arisen from incorrect usage or transportation.
Agent.		Children's safety
• Have a qualified electrician connect a		• Electrical products are dangerous for the
16-Ampere fuse to the installation location of		children. Keep children away from the product
the product.		when it is in use. Do not let them to tamper with
• If the product has a failure, it should not be		the product.
operated unless it is repaired by the Authorized		• Do not forget to close the loading door when
Service Agent. There is the risk of electric		leaving the room where the product is located.
shock!		• Store all detergents and additives in a safe
• This product is designed to resume operating		place away from the reach of the children.
in the event of powering on after a power		2 Installation
interruption. If you wish to cancel the
programme, see "Cancelling the programme"		Refer to the nearest Authorised Service Agent for
section.		installation of the product. To make the product
• Connect the product to a grounded outlet		ready for use, review the information in the user
protected by a fuse complying with the values		manual and make sure that the electricity, tap water
in the "Technical specifications" table. Do not		supply and water drainage systems are appropriate
neglect to have the grounding installation made		before calling the Authorized Service Agent. If they
by a qualified electrician. Our company shall		are not, call a qualified technician and plumber to
not be liable for any damages that will arise		have any necessary arrangements carried out.
when the product is used without grounding in		C Preparation of the location and electrical, tap
accordance with the local regulations.		water and waste water installations at the place
• The water supply and draining hoses must be		of installation is under customer's responsibility.
securely fastened and remain undamaged.		B Installation and electrical connections of the
Otherwise, there is the risk of water leakage.		product must be carried out by the Authorized
• Never open the loading door or remove the filter		Service Agent. Manufacturer shall not be
while there is still water in the drum. Otherwise,		held liable for damages that may arise from
risk of flooding and injury from hot water will		procedures carried out by unauthorized
occur.		persons.
• Do not force open the locked loading door.		A Prior to installation, visually check if the product
The loading door will be ready to open just a		has any defects on it. If so, do not have it
few minutes after the washing cycle comes to		installed. Damaged products cause risks for
an end. In case of forcing the loading door to		your safety.
open, the door and the lock mechanism may		C Make sure that the water inlet and discharge
get damaged.		hoses as well as the power cable are not
• Unplug the product when not in use.		folded, pinched or crushed while pushing
• Never wash the product by spreading or		the product into its place after installation or
pouring water onto it! There is the risk of electric		cleaning procedures.
shock!		Appropriate installation location
• Never touch the plug with wet hands! Never		• Place the machine on a rigid floor. Do not place
unplug by pulling on the cable, always pull out		it on a long pile rug or similar surfaces.
by grabbing the plug.		• Total weight of the washing machine and the

2 - EN

	dryer -with full loadwhen they are placed		the laundry will get damaged or the product will
	on top of each other reaches to approx. 180		switch to protection mode and will not operate.
	kilograms. Place the product on a solid and flat	A Do not use old or used water inlet hoses on
	floor that has sufficient load carrying capacity!		the new product. It may cause stains on your
	• Do not place the product on the power cable.		laundry.
	• Do not install the product at places where	1.	Connect the special hoses supplied with the
	temperature may fall below 0ºC.		product to the water inlets on the product. Red
	• Place the product at least 1 cm away from the		hose (left) (max. 90 ºC) is for hot water inlet,
	edges of other furniture.		blue hose (right) (max. 25 ºC) is for cold water
	Removing packaging reinforcement		inlet.
	Tilt the machine backwards to remove the	A Ensure that the cold and hot water connections
	packaging reinforcement. Remove the packaging		are made correctly when installing the product.
	reinforcement by pulling the ribbon.		Otherwise, your laundry will come out hot at the
			end of the washing process and wear out.
		Tighten all hose nuts by hand. Never use a wrench
		when tightening the nuts. Open the taps completely
		after making the hose connection to check
		for water leaks at the connection points. If any
		leaks occur, turn off the tap and remove the nut.
		Retighten the nut carefully after checking the seal.
	Removing the transportation locks	To prevent water leakages and damages caused
	A Do not remove the transportation locks before	by them, keep the taps closed when the machine
		is not in use.
	taking out the packaging reinforcement.
	A Remove the transportation safety bolts before	Connecting to the drain
	operating the washing machine! Otherwise, the
	product will be damaged.	•	The end of the drain hose must be directly
	Loosen all the bolts with a suitable spanner until		connected to the wastewater drain or to the
	they rotate freely (C). Remove transportation safety		washbasin.
	bolts by turning them gently. Attach the plastic	A Your house will be flooded if the hose comes
	covers supplied in the User Manual bag into the		out of its housing during water discharge.
	holes on the rear panel. (P)		Moreover, there is risk of scalding due to
			high washing temperatures! To prevent such
			situations and to ensure smooth water intake
			and discharge of the machine, fix the end of the
			discharge hose tightly so that it cannot come
	C Keep the transportation safety bolts in a safe		out.
	place to reuse when the washing machine	•	The hose should be attached to a height of at
	needs to be moved again in the future.		least 40 cm, and 100 cm at most.
	C Never move the product without the	•	In case the hose is elevated after laying it on
	transportation safety bolts properly fixed in		the floor level or close to the ground (less than
	place!		40 cm above the ground), water discharge
	Connecting water supply		becomes more difficult and the laundry may
	C The water supply pressure required to run		come out excessively wet. Therefore, follow the
			heights described in the figure.
	the product is between 1 to 10 bars (0.1 – 10
	MPa). It is necessary to have 10 – 80 liters of
	water flowing from the fully open tap in one
	minute to have your machine run smoothly.
	Attach a pressure reducing valve if water
	pressure is higher.
	C If you are going to use the double water-inlet
	product as a single (cold) water-inlet unit, you
	must install the supplied stopper to the hot	•	To prevent flowing of dirty water back into the
	water valve before operating the product.
			machine and to allow for easy discharge, do
	(Applies for the products supplied with a blind
			not immerse the hose end into the dirty water
	stopper group.)
			or do not drive it in the drain more than 15 cm.
	C If you want to use both water inlets of the
			If it is too long, cut it short.
	product, connect the hot water hose after	•	The end of the hose should not be bent, it
	removing the stopper and gasket group from
			should not be stepped on and the hose must
	the hot water valve. (Applies for the products
			not be pinched between the drain and the
	supplied with a blind stopper group.)
			machine.
	A Models with a single water inlet should not be
		•	If the length of the hose is too short, use it
	connected to the hot water tap. In such a case		by adding an original extension hose. Length

3 - EN

	of the hose may not be longer than 3.2 m.	product due to the quality control processes in
	To avoid water leak failures, the connection	the production. It is not harmful for the product.
	between the extension hose and the drain	Disposing of packaging material
	hose of the product must be fitted well with an	Packaging materials are dangerous to children.
	appropriate clamp as not to come off and leak.	Keep packaging materials in a safe place away
	Adjusting the feet	from reach of the children.
	A In order to ensure that the product operates	Packaging materials of the product are
	more silently and vibration-free, it must stand	manufactured from recyclable materials. Dispose of
	level and balanced on its feet. Balance the	them properly and sort in accordance with recycled
	machine by adjusting the feet. Otherwise, the	waste instructions. Do not dispose of them with
	product may move from its place and cause	normal domestic waste.
	crushing and vibration problems.	Transportation of the product
	Loosen the lock nuts on the feet by hand. Adjust	Unplug the product before transporting it. Remove
	the feet until the product stands level and balanced.	water drain and water supply connections. Drain
	Tighten all lock nuts again by hand.	the remaining water in the product completely;
		see, "Draining remaining water and cleaning the
		pump filter". Install transportation safety bolts
		in the reverse order of removal procedure; see,
		"Removing the transportation locks".
		C Never move the product without the
	A Do not use any tools to loosen the lock nuts.	transportation safety bolts properly fixed in
	Otherwise, they will get damaged.	place!
	Electrical connection	Disposing of the old product
	Connect the product to a grounded outlet	Dispose of the old product in an environmentally
	protected by a fuse complying with the values in	friendly manner.
	the "Technical specifications" table. Our company	Refer to your local dealer or solid waste collection
	shall not be liable for any damages that will arise	centre in your area to learn how to dispose of your
	when the product is used without grounding in	product.
	accordance with the local regulations.	For children's safety, cut the power cable and break
	• Connection must comply with national	the locking mechanism of the loading door so
	regulations.	that it will be nonfunctional before disposing of the
	• Power cable plug must be within easy reach	product.
	after installation.	3 Preparation
	• The voltage and allowed fuse or breaker	Things to be done for energy saving
	protection are specified in the “Technical	Following information will help you use the product
	specifications” section. If the current value of	in an ecological and energy-efficient manner.
	the fuse or breaker in the house is less than 16	• Operate the product in the highest capacity
	Amps, have a qualified electrician install a 16	allowed by the programme you have selected,
	Amp fuse.	but do not overload; see, "Programme and
	• The specified voltage must be equal to your	consumption table".
	mains voltage.	• Always follow the instructions on the detergent
	• Do not make connections via extension cables	packaging.
	or multi-plugs.	• Wash slightly soiled laundry at low
	B Damaged power cables must be replaced by	temperatures.
	the Authorized Service Agents.	• Use faster programmes for small quantities of
	First use	lightly soiled laundry.
	Before starting to use the product, make sure	• Do not use high temperatures for laundry that is
	that all preparations are made in accordance	not heavily soiled or stained.
	with the instructions in sections "Important safety	• Do not use detergent in excess of the amount
	instructions" and "Installation".	recommended on the detergent package.
	To prepare the product for washing laundry,	Sorting the laundry
	perform first operation in Cotton-90 programme.	• Sort laundry according to type of fabric, colour,
	Before starting the programme, put max. 100	and degree of soiling and allowable water
	g of powder anti-limescale into the main wash	temperature.
	detergent compartment (compartment nr. II). If the	• Always obey the instructions given on the
	anti-limescale is in tablet form, put only one tablet	garment tags.
	into compartment nr. II. Dry the inside of the bellow	Preparing laundry for washing
	with a clean piece of cloth after the programme has	• Laundry items with metal attachments such as,
	come to an end.	underwired bras, belt buckles or metal buttons
	C Use an anti-limescale suitable for the washing
		will damage the machine. Remove the metal
	machines.
		pieces or wash the clothes by putting them in a
	C Some water might have remained in the
		laundry bag or pillow case.

4 - EN

	• Take out all substances in the pockets such as					is running. The door can only be opened a
		coins, pens and paper clips, and turn pockets				while after the programme comes to an end.
		inside out and brush. Such objects may				A In case of misplacing the laundry, noise and
		damage the product or cause noise problem.				vibration problems may occur in the machine.
	• Put small size clothes such as infant's socks					Using detergent and softener
		and nylon stockings in a laundry bag or pillow				Detergent Drawer
		case.				The detergent drawer is composed of three
	• Place curtains in without compressing them.					compartments:
		Remove curtain attachment items.				- (1) for prewash
	• Fasten zippers, sew loose buttons and mend					- (2) for main wash
		rips and tears.				– (3) for softener
	• Wash “machine washable” or “hand washable”					– (*) in addition, there is siphon piece in the softener
		labeled products only with an appropriate				compartment.
		programme.
	• Do not wash colours and whites together. New,					2 3	1
		dark coloured cottons release a lot of dye.
		Wash them separately.
	• Tough stains must be treated properly before
		washing. If unsure, check with a dry cleaner.
	• Use only dyes/colour changers and limescale
		removers suitable for machine wash. Always
		follow the instructions on the package.				Detergent, softener and other cleaning agents
	• Wash trousers and delicate laundry turned					• Add detergent and softener before starting the
		inside out.				washing programme.
	• Keep laundry items made of Angora wool in the					• Never open the detergent drawer while the
		freezer for a few hours before washing. This will				washing programme is running!
		reduce pilling.				• When using a programme without prewash,
	• Laundry that are subjected to materials such as					do not put any detergent into the prewash
		flour, lime dust, milk powder, etc. intensely must				compartment (compartment nr. 1).
		be shaken off before placing into the machine.				• In a programme with prewash, do not put
		Such dusts and powders on the laundry may				liquid detergent into the prewash compartment
		build up on the inner parts of the machine in				(compartment nr. 1).
		time and can cause damage.				• Do not select a programme with prewash if you
	Correct load capacity					are using a detergent bag or dispensing ball.
	The maximum load capacity depends on the type					Place the detergent bag or the dispensing ball
	of laundry, the degree of soiling and the washing					directly among the laundry in the machine.
	programme desired.					• If you are using liquid detergent, do not forget
	The machine automatically adjusts the amount					to place the liquid detergent cup into the main
	of water according to the weight of the loaded					wash compartment (compartment nr. 2).
	laundry.					Choosing the detergent type
	A Follow the information in the “Programme					The type of detergent to be used depends on the
		and consumption table”. When overloaded,				type and colour of the fabric.
		machine's washing performance will drop.				• Use different detergents for coloured and white
		Moreover, noise and vibration problems may				laundry.
		occur.				• Wash your delicate clothes only with special
	Laundry types and their average weights in the					detergents (liquid detergent, wool shampoo,
	following table are given as examples.					etc.) used solely for delicate clothes.
						• When washing dark coloured clothes and
		Laundry type		Weight (g)
						quilts, it is recommended to use liquid
		Bathrobe		1200
						detergent.
		Duvet cover		700		• Wash woolens with special detergent made
		Bed Sheet		500		specifically for woolens.
		Pillowcase		200		A Use only detergents manufactured specifically
		Tablecloth		250		for automatic washing machines.
		Towel		200		A Do not use soap powder.
						Adjusting detergent amount
		Men’s shirt		200
						The amount of washing detergent to be used
	Loading the laundry					depends on the amount of laundry, the degree
	Open the loading door. Place laundry items loosely					of soiling and water hardness. Read the
						manufacturer's instructions on the detergent
	into the machine. Push the loading door to close
						package carefully and follow the dosage values.
	until you hear a locking sound. Ensure that no items
						• Do not use amounts exceeding the dosage
	are caught in the door.

C The loading door is locked while a programme	quantities recommended on the detergent
5 - EN

package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

•Use lesser detergent for small amounts or lightly soiled clothes.

•Use concentrated detergents in the

recommended dosage.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

•Use the dosages recommended on the package.

•Do not exceed the (>max<) level marking in the softener compartment.

•If the softener has lost its fluidity, dilute it with

water before putting it in the detergent drawer.

Using bleaches

•Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment.

•Do not use bleaching agent and detergent by

Tips for efficient washing

mixing them.

•Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.

•When using oxygen based bleaches, follow the instructions on the package and select a programme that washes at a lower temperature.

•Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. "II"

in the detergent drawer and wait until the detergent flows while the machine is taking in water. Add the bleaching agent from the same compartment while the machine is still taking in

water.

Using limescale remover

•When required, use limescale removers manufactured specifically for washing machines only.

•Always follow instructions on the package.

		Light colours and whites	Colors	Dark colors	Delicates/Woolens/
		(Recommended temperature	(Recommended	(Recommended	Silks
		range based on soiling level:	temperature range based	temperature range	(Recommended
		40-90ºC)	on soiling level: cold-40ºC)	based on soiling	temperature range
				level: cold-40ºC)	based on soiling level:
					cold-30ºC)
		It may be necessary to pre-	Powder and liquid	Liquid detergents	Prefer liquid detergents
	Heavily soiled	treat the stains or perform	detergents recommended	suitable for	produced for delicate
		prewash. Powder and liquid	for colours can be used at	colours and dark	clothes. Woollen and
	clothes	detergents recommended	dosages recommended	colours can be	silk clothes must be
	(difficult stains
		for whites can be used at	for heavily soiled clothes.	used at dosages	washed with special
	such as	dosages recommended for	It is recommended to use	recommended	woollen detergents.
	grass, coffee,
	fruits and	heavily soiled clothes. It is	powder detergents to	for heavily soiled
		recommended to use powder	clean clay and soil stains	clothes.
	blood.)
		detergents to clean clay and	and the stains that are
		soil stains and the stains that	sensitive to bleaches. Use
		are sensitive to bleaches.	detergents without bleach.
	Normally	Powder and liquid detergents	Powder and liquid	Liquid detergents	Prefer liquid detergents
		recommended for whites	detergents recommended	suitable for	produced for delicate
	soiled clothes	can be used at dosages	for colours can be used at	colours and dark	clothes. Woollen and
	(For example,	recommended for normally	dosages recommended	colours can be	silk clothes must be
	stains caused	soiled clothes.	for normally soiled clothes.	used at dosages	washed with special
	by body on		Use detergents without	recommended for	woollen detergents.
	collars and		bleach.	normally soiled
	cuffs)
				clothes.
		Powder and liquid detergents	Powder and liquid	Liquid detergents	Prefer liquid detergents
	Lightly soiled	recommended for whites	detergents recommended	suitable for	produced for delicate
		can be used at dosages	for colours can be used at	colours and dark	clothes. Woollen and
	clothes	recommended for lightly	dosages recommended for	colours can be	silk clothes must be
	(No visible
		soiled clothes.	lightly soiled clothes. Use	used at dosages	washed with special
	stains exist.)
			detergents without bleach.	recommended	woollen detergents.
				for lightly soiled
				clothes.

6 - EN

4 Operating the product

Control panel	1

1 - Programme Selection knob (Uppermost position On / Off)

2 - Door open indicator

3 - Programme Follow-up indicator

4 - Start / Pause button

2

3

4

	Preparing the machine				shorter washing cycle compared to the Cotton
	Make sure that the hoses are connected tightly.				programme.
	Plug in your machine. Turn the tap on completely.				For curtains and tulle, use the Synthetic 40˚C
	Place the laundry in the machine. Add detergent				programme. As their meshed texture causes
	and fabric softener.				excessive foaming, wash the veils/tulle by putting
	Programme selection				little amount of detergent into the main wash
	Select the programme suitable for the type, quantity				compartment. Do not put detergent in the prewash
	and soiling degree of the laundry in accordance				compartment.
	with the "Programme and consumption table" and				• Woollens
	the temperature table below. Select the desired				Use this programme to wash your woolen clothes.
	programme with the Programme Selection button.				Select the appropriate temperature complying
					with the tags of your clothes. Use appropriate
			Heavily soiled white cottons and linens.		detergents for woolens.
	90˚C		(coffee table covers, tableclothes,		Additional programmes
			towels, bed sheets, etc.)		For special cases, additional programmes are
			Normally soiled, coloured, fade proof		available in the machine.
			linens, cottons or synthetic clothes		C Additional programmes may differ according to
	60˚C		(shirt, nightgown, pajamas, etc.) and		the model of the machine.
			lightly soiled white linens (underwear,		• Prewash Cotton
			etc.)		Prefer this programme only for heavily soiled cotton
					clothes.
	40˚C-	Blended laundry including delicate
					C Not using this programme with prewash will
	30˚C-		textile (veil curtains, etc.), synthetics and
	Cold		woolens.		save energy, water, detergent and time.
					• Cotton Economic
	C Programmes are limited with the highest spin				By washing normally soiled cotton and linen laundry
	speed appropriate for that particular type of				in this programme, you can ensure higher energy
	fabric.				and water efficiency than other cotton programmes
	C When selecting a programme, always consider				do. Actual water temperature may be different from
	the type of fabric, colour, degree of soiling and				the stated wash temperature. When you load the
	permissible water temperature.				machine with less laundry (e.g. ½ capacity or less),
	C For further programme details, see				programme time may automatically get shorter
					in the later stages. In this case, energy and water
	"Programme and consumption table".
					consumption will reduce for a more economic
	Main programmes
	Depending on the type of fabric, use the following				wash. This feature is provided in the models with
					the remaining time indicator.
	main programmes.
					• Delicate 30
	• Cottons
					Use this programme to wash your delicate clothes.
	Use this programme for your cotton laundry (such
					It washes with a gentle action without any interim
	as bed sheets, duvet and pillowcase sets, towels,
	bathrobes, underwear, etc.). Your laundry will be				spin compared to the Synthetics programme.
	washed with vigorous washing action for a longer				• Hand Wash
	washing cycle.				Use this programme to wash your woolen/delicate
	• Synthetics				clothes that bear “not machinewashable” tags
	Use this programme to wash your synthetic				and for which hand wash is recommended. It
	clothes (shirts, blouses, synthetic/cotton blends,				washes laundry with a very gentle washing action
	etc.). It washes with a gentle action and has a				to not to damage clothes.

7 - EN

• Mini 30

Use this programme to wash your lightly soiled cotton clothes in a short time.

Special programmes

For specific applications, select any of the following programmes.

• Rinse

Use this programme when you want to rinse or starch separately.

• Spin + Pump

Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.

C If you wish to drain the water only without spinning your laundry, select the Spin+Pump programme and press "Start / Pause" button. Machine will switch to spin step once it completes the program step. Press "Start / Pause" button to stop the machine as soon as you see the drum rotating. And cancel this programme by turning Programme Selection knob to any other position.

Programme and consumption table

EN
Programme		<![if ! IE]> <![endif]>LoadMax.(kg)	<![if ! IE]> <![endif]>ProgrammeDuration (~min)	<![if ! IE]> <![endif]>ConsumptionWater (l)	<![if ! IE]> <![endif]>ConsumptionEnergy (kWh)	<![if ! IE]> <![endif]>Speed***Max.
Cottons	90	6	130	52	1.71	1000
Prewash-Cottons	60	6	118	60	1.44	1000
Cottons	40	6	80	52	0.59	1000
Cottons	Cold	6	80	52	0.10	1000
Cotton Economic	60**	6	130	49	0.93	1000
Cotton Economic	60**	3	128	45	0.81	1000
Cotton Economic	40**	3	113	45	0.62	1000
Synthetics	60	2.5	113	65	1.02	1000
Synthetics	40	2.5	105	64	0.56	1000
Synthetics	Cold	2.5	66	62	0.10	1000
Delicate	30	2	61	47	0.26	1000
Woollens	40	1.5	54	50	0.35	1000
Hand wash	30	1	41	34	0.20	1000
Mini 30	30	2.5	29	72	0.21	800

8 - EN

** “Cotton Economic 40°C and Cotton Economic 60°C are the standard programmes.” These programmes are referred to as ‘standard

40°C cotton programme’ and ‘standard 60°C cotton programme’

• : Selectable

**: Energy Label programme (EN 60456 Ed.3)

***If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.

C Water and power consumption may vary subject to the changes in water pressure, water

hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.

Starting the programme	to use "Spin+Pump" programme. See
Press Start / Pause button to start the programme.	"Spin+Pump"
Programme follow-up light showing the startup of	Re-spinning the laundry
the programme will turn on.	Unbalanced load control system can prevent
Progress of programme	spinning because of unbalanced load of laundry in
Progress of a running programme can be followed	the machine. If you would like to spin again:
from the Programme Follow-up indicator with the	Rearrange the laundry in the machine. Select
lights "Running" and "End/Cancel".	Spin+Pump programme and press “Start / Pause"
C If the machine does not pass to the spinning	button.
step, automatic unbalanced load detection	End of programme
system might have been activated due to the	"End/Cancel" light on the programme follow-up
unbalanced distribution of the laundry in the	indicator will light up once the programme comes
machine.	to an end; and "Door Open" symbol flashes for
Loading door lock	1-2 minutes until the door is ready to open. When
There is a locking system on the loading door of the	"Door Open" symbol is steadily illuminated, the
machine that prevents opening of the door in cases	door can be opened.
when the water level is unsuitable.	To turn off the machine, turn program selection
If you want to open loading door when the machine	knob to "On / Off" position. Take out your laundry
is in use, press "Start / Pause" button to pause the	and close the loading door. The machine will be
machine. "Door Open" light will start flashing when	ready for the next run.
the machine is switched to Pause mode. Machine	Door Open
checks the level of the water inside. If the level	"Door Open" symbol is illuminated when the door is
is suitable, "Door Open" light illuminates steadily	ready to open. It flashes until the door gets ready to
within 1-2 minutes and the loading door can be	open. If the "Door Open" symbol is not illuminated,
opened.	do not force the door to open. The symbol's light is
If the level is unsuitable, "Door Open" light turns off	steady when the door is ready to open.
and the loading door cannot be opened. If you are	5 Maintenance and cleaning
obliged to open the loading door when the "Door
Open" light is off, you have to cancel the current
	Service life of the product extends and frequently
programme; see "Cancelling the programme".	faced problems decrease if cleaned at regular
Switching the machine to pause mode	intervals.
Press the "Start / Pause" button to switch the	Cleaning the detergent drawer
machine to pause mode while a programme is	Clean the detergent drawer at regular intervals

	running. "Running" light starts flashing on the	(every 4-5 washing cycles) as shown below in order
	Programme Follow-up indicator to show that the
		to prevent accumulation of powder detergent in
	machine has been switched to the pause mode.
		time.
	When the loading door is ready to be opened,
	"Door Open" light will illuminate continuously.
	Adding or taking out laundry
	Press "Start / Pause" button to switch the machine
	to pause mode. When the machine is switched to
	pause mode, "Running" light flashes. Wait until the
	Loading Door can be opened. Open the Loading
	Door and add or take out the laundry.	Press the dotted point on the siphon in the softener
	Close the Loading Door. Press "Start / Pause"
		compartment and pull towards you until the
	button to start the machine.
		compartment is removed from the machine.
	C The door can be opened if the water level is
		C If more than normal amount of water and
	suitable. Door open symbol flashes until the
		softener mixture starts to gather in the softener
	loading door gets ready to be opened. The
		compartment, the siphon must be cleaned.
	symbol's light is steady when the door is ready
		Wash the detergent drawer and the siphon with
	to open. You can open the door to add/take
		plenty of lukewarm water in a washbasin. Wear
	out laundry.
		protective gloves or use an appropriate brush to
	Cancelling the programme
		avoid touching of the residues in the drawer with
	To cancel the programme, turn the Programme
		your skin when cleaning. Insert the drawer back
	Selection knob to select another programme.
		into its place after cleaning and make sure that it is
	Previous programme will be cancelled. "End/
		seated well.
	Cancel" light will flash continuously to notify that the
		Cleaning the loading door and the drum
	programme has been cancelled.
		Residues of softener, detergent and dirt may
	C If you start a new programme after cancelling
		accumulate in your machine in time and may cause
	the previous one, this new programme will start
		unpleasant odours and washing complaints. To
	without draining the water in the machine.
		avoid this, use the Drum Cleaning programme.
	C If you must certainly open the loading door
		If your machine does not have a Drum Cleaning
	when the “Door Open” light is off, you need
	9 - EN

programme, use Cotton-90 programme. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the antilimescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

C Repeat Drum Cleaning process in every 2 months.

C Use an anti-limescale suitable for the washing machines.

After every washing make sure that no foreign substance is left in the drum.

If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.

C Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.

Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

A Never use sponge or scrub materials. These will damage the painted and plastic surfaces.

Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty.

Close the taps. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, take them out by means of pliers and clean them. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water. Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand.

Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of

washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.

If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter.

In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.

A Foreign substances left in the pump filter may damage your machine or may cause noise problem.

In order to clean the dirty filter and discharge the water:

Unplug the machine to cut off the supply power.

A Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down.

Open the filter cover by pulling it from both sides at the top.

C You can remove the filter cover by slightly pushing downwards with a thin plastic tipped tool, through the gap above the filter cover. Do not use metal tipped tools to remove the cover.

Follow the steps below to discharge the water.

Place a large container in front of the filter to catch water from the filter. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth

handy to absorb any spilled water. When the water inside the machine is finished, take out the filter completely by turning it.

Clean any residues inside the filter as well as fibers, if any, around the pump impeller region. Install the filter.

Seat the tabs in the lower part into their places first, and then press the upper part to close.

10 - EN

6 Technical specifications

Models	EV6600
Maximum dry laundry capacity (kg)	6
Height (cm)	84
Width (cm)	60
Depth (cm)	45
Net weight (±4 kg.)	59
Electrical input (V/Hz)	230 V / 50Hz
Total current (A)	10
Total power (W)	2200
Spin speed (rpm max.)	600
Stand-by mode power (W)	1.00
Off-mode power (W)	0.20

C Technical specifications may be changed without prior notice to improve the quality of the product.

C Figures in this manual are schematic and may not match the product exactly.

C Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact

your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

Dark wash	Dark wash	Synthetics	Cottons	Pre-wash	Main	Rinse	Wash	Spin	Delicate	Pet hair Door Ready
(Darkcare)	(Darkcare)				wash					removal
Drain	Anti-	Duvet	Child-	Hand	BabyProtect	Cotton	Woollens expres 14		Daily	mini 30	On/Off
(Pump)	creasing	(Bedding) proof lock		Wash		Eco	Super short
							express
Daily	Rinse hold	Start/	No spin	Quick	Finished	Cold	Temperature	Self	Lingerie	Eco Clean
express		Pause		wash				Clean
Mixed 40	Super 40	Extra rinse	Freshen	Shirts	Jeans	Sport	Time delay Intensive		Fashioncare	Anti-
(Mix40)		(Rinse Plus) up								allergic

11 - EN

7 Troubleshooting

Programme cannot be started or selected.

•Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. (See "Cancelling the programme")

Water in the machine.

•Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.

Machine vibrates or makes noise.

•Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

•A hard substance might have entered into the pump filter. >>> Clean the pump filter.

•Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

•Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

•Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

•Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

•Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Foam is overflowing from the detergent drawer.

•Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer.

C Put detergent into the machine suitable for the programmes and maximum loads indicated in the

“Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme

•Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

A If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

12 - EN

<![if ! IE]>

<![endif]>2820522866_EN/120412.1828