Headphone Ampliers and Monitoring
POWERPLAY 16
P16
P16-M — 16-Channel Digital
Personal Mixer
16-channel digital stereo mixer to
create your personal monitor mix
Ultra-intuitive “analog” operation
with total recall and 16 presets for
custom mixes
State-of-the-art 24-bit D/A
converters for premium
audio quality
16 Channel Select buttons with dual
LEDs for perfect overview
Level and Pan/Spread control per
channel with LED meter
3-band EQ per channel with
mid-band frequency control
Solo and Mute functions per channel
Global Level and EQ controls plus
Panic Mute function
High power and “drummer proof”
headphones output
Fully adjustable limiter protects your
ears and headphones
Additional mono/stereo line output
to connect your powered monitor
MIDI IN port for real-time remote
control of all channels by external
MIDI device such as BEHRINGER
BCF2000, BCR2000, etc.
The BEHRINGER POWERPLAY P16
system is the easy, aordable way to
give your musicians and vocalists what
they really want—“more me!” P16-M
Personal Mixers lets each performer take
control of what they hear, allowing the
engineer to concentrate on providing
the audience with the best possible
listening experience. Fast and easy to set
up, a basic system can be installed and
congured in a matter of minutes—and
the system can be expanded to adapt to
changing needs.
Tech-Free Zone
The P16-M’s simple user interface
makes it easy for even non-techies
to dial-in the perfect monitor mix.
Forexample, let’s say the electric guitar
is too loud in the lead vocalist’s mix;
theysimply press the appropriate channel
button (the one labeled E. GTR) and turn
the Volume control to lower the guitar
level in their mix. They can also adjust
Pan (left to right mix), EQ (Bass, Mid with
sweepable Freq control and Treble),
andmuch more. All of these adjustments
can be made without aecting anyone
else’s personal mix.
Continued on next page
Standard CAT5e connection delivers
power and 16 signals to each
Personal Mixers
ULTRANET connector to daisy-chain
up to forty-eight P16-M mixers for
large systems (in conjunction
with P16-D)
Ultra-low system latency of less
than 1 millisecond
Page 2 of 5
POWERPLAY 16
P16
Powered via external power supply
(included) or P16-I / P16-D
Mounts easily on a mic stand
with the P16-MB mic stand mount
(not included)
P16-I — 16-Channel 19" Input Module
with Analog and ADAT Optical Inputs
Converts 16 analog inputs into 24-bit
digital audio to be transmitted via
standard CAT5e cable
2 x 8-channel ADAT optical inputs
with auto detect and priority select
16 balanced, high-headroom
TRS audio inputs
Easy Installation
A basic installation consists of one
P16-I audio interface, which connects to
the main mixing console, and up to six
P16-M Personal Mixers, creating a system
big enough to equip a typical recording
studio, a small to medium-sized band,
or a worship team. You’ll also need a
few standard audio and CAT5 cables.
Theoptional P16- MB mounting bracket
allows the P16-M Digital Personal Mixer to
be attached to any standard microphone,
music or drum stand. The system can
easily be expanded via the P16-D Digital
ULTRANET Distributor, six of which can
be combined to drive up to forty-eight
P16-M Personal Mixers.
Extraordinary Value
The POWERPLAY P16 puts total control
of the monitor system where it belongs—
in the hands of the performers, freeingup
the engineer to sculpt the perfect
front-of-house mix. The POWERPLAY P16
system is the easy, aordable way to tame
runaway stage volume and give your
musicians and vocalists what they really
want—“moreme!”
Continued on next page
State-of-the-art 24-bit A/D
converters for premium
audio quality
4-position gain switches per channel
pair (-10, 0, +4, +22 dB)
Digital inputs support 44.1 and 48
kHz sample rates
Ultra-low system latency of less than
1 millisecond
Signal Present and Clip LEDs per
channel plus ADAT status LEDs
Standard CAT5e connection
delivers power and signals for up to
6 Personal Mixers
ULTRANET expansion network
connector (RJ45)
Internal autorange power supply for
maximum exibility (100 – 240 V~),
noise-free audio, superior transient
response plus low power
consumption for energy saving