This symbol, wherever it appears, alerts you to the
presence of uninsulated dangerous voltage inside the
*
enclosure - voltage that may be sufcient to constitute
a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the accom-
!
panying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the +
top cover (or the rear section). No user serviceable parts
inside; refer servicing to qualied personnel.
To reduce the risk of re or electric shock, do not expose +
this appliance to rain and moisture. The apparatus shall
not be exposed to dripping or splashing and no objects
lled with liquids, such as vases, shall be placed on
the apparatus.
These service instructions are for use by qualied +
service personnel only. To reduce the risk of electric
shock do not perform any servicing other than that
contained in the operation instructions unless you are
qualied to do so.
We would like to bring your attention to the fact that +
extremely loud sound levels may damage your hearing
as well as your loudspeakers. Please lower both GAIN
controls leftwards before powering up the unit. Be sure
to keep the volume at an appropriate level.
Ventilation:
The appliance should be situated so that its location or +
position does not interfere with its proper ventilaton.
For example, the appliance should not be situated on
a bed, sofa rug, or similar surface that may block the
ventilation openings: or placed in a built-in installation,
such as a bookcase or cabinet that may impede the ow
of air through the ventilation openings.
Read these instructions.1)
Keep these instructions.2)
Heed all warnings.3)
Follow all instructions.4)
Do not use this apparatus near water.5)
Clean only with dry cloth.6)
Do not block any ventilation openings. Install in ac-7)
cordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, 8)
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or 9)
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched 10)
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
The apparatus shall be connected to a MAINS socket 11)
outlet with a protective grounding connection.
Where the MAINS plug or an appliance coupler is used 12)
as the disconnect device, the disconnect device shall
remain readily operable.
Only use attachments/accessories specied by the ma-13)
nufacturer.
Use only with the cart, stand, tripod, bra-14)
cket, or table specied by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or when 15)
unused for long periods of time.
Refer all servicing to qualied service personnel. Ser-16)
vicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
EUROPOWER EP1500/EP2500
3
EP1500/EP2500
2x700 WATTS POWER AMPLIFIER
2x1200 WATTS POWER AMPLIFIER
EUROPOWER
Power amplifier with 2 x 700 or 2 x 1200 Watts
EP1500: 2 x 700 Watts into 2 Ohms; 1,400 Watts into 4 Ohms bridged operation =
EP2500: 2 x 1,200 Watts into 2 Ohms; 2,400 Watts into 4 Ohms bridged operation =
2-channel, parallel or bridged mono operating modes for exible application=
Independent limiters for each channel offer dependable protection against distortion =
Precise signal and clip LED indicators to monitor performance =
High-current toroidal transformer for absolute reliability and lowest noise emission =
“Back-to-front” ventilation system including air lter with automatically adjusting fan speed for smooth =
operation
Independent DC and thermal overload protection on each channel automatically protects amplier =
and speakers
High-quality components and exceptionally rugged construction ensure long life =
Conceived and designed by BEHRINGER Germany =
All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and EUROPOWER) mentioned belong to their respective owners and are not afliated with
BEHRINGER.
EUROPOWER EP1500/EP2500
4
Foreword
Dear Customer,
Welcome to the team of BEHRINGER users, and thank you very much for expressing your
condence in us by purchasing this power amplier.
Writing this foreword for you gives me great pleasure, because it repre-sents the culmination
of many months of hard work delivered by our engineering team to achieve a very ambitious
goal: to develop two outstanding power ampliers, whose exibility lets them respond to all the
P.A. and instrument amplication requirements. The task of designing our new EUROPOWER
EP1500 and EP2500 certainly meant a great deal of responsibility, which we assumed by focusing on you, the discerning user and musician. Meeting your expectations also meant a lot
of work and night shifts. But it was fun, too. Developing a product usually brings a lot of people
together, and what a great feeling it is when all who participated in such a project can be proud
of what they’ve achieved.
It is our philosophy to share our enjoyment with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products you’ve
made a signicant contribution to shaping our company and making it successful. In return, we
guarantee you uncompromising quality as well as excellent technical and audio properties at an
extremely reasonable price. All of this will enable you to give free rein to your creativity without
being hampered by budget constraints.
We are often asked how we manage to produce such high-quality devices at such unbelievably
low prices. The answer is quite simple: it’s you, our customers! Many satised customers mean
fair to pass this benet on to you? Because we know that your success is our success too!
I would like to thank all of you who have made the EUROPOWER power ampliers possible. You have all made your own personal
contributions, from the developers to the many other employees at this company, and to you, the BEHRINGER user.
large sales volumes enabling us to get better purchasing terms for components, etc. Isn’t it only
By purchasing one of the BEHRINGER EUROPOWER ampliers,
you have selected a piece of high-end gear. This unit was developed for professional use in live applications, and its rich list of
features will make it a dependable part of your equipment with a
diverse set of possible uses.
The EUROPOWER amps feature for example an input lter
for each channel, enabling you to remove the disturbing lowfrequency portion of the signal. Additionally, there is a limiter that
protects your loudspeakers. Various operating modes, such as
parallel or mono mode, open up various possibilities for effective
implementation with the rest of your audio equipment, leaving no
wishes unanswered.
This manual rst describes the terminology used, so +
that you fully understand the EUROPOWER and its
functions. Please read the manual carefully and keep it
for future reference.
Before you get started1.1
Shipment1.1.1
Your EUROPOWER was carefully packed at the factory, and the
packaging is designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which
may have occurred during transit.
If the unit is damaged, please do NOT return it to +
BEHRINGER, but notify your dealer and the shipping
company immediately. Otherwise, claims for damage
or replacement may not be granted.
Initial operation1.1.2
Please make sure the unit is provided with sufcient ventilation,
and never place your EUROPOWER amp on top of other heatemanating equipment or in the vicinity of a heater to avoid the
risk of overheating.
The mains connection is made via the enclosed power cord and
a standard IEC receptacle. It meets all international safety certi-
cation requirements.
Please make sure that all units have a proper ground +
connection. For your own safety, never remove or
disable the ground conductor from the unit or the AC
power cord.
The sound quality may diminish within the range of pow- +
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online registration1.1.3
Please register your new BEHRINGER equipment right after your
purchase by visiting http://www.behringer.com and read the terms
and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom the
equipment was purchased. Should your BEHRINGER dealer not
be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in
the original equipment packaging (Global Contact Information/
European Contact Information). Should your country not be listed,
please contact the distributor nearest you. A list of distributors can
be found in the support area of our website (http://www.behringer.
com). Registering your purchase and equipment with us helps us
process your repair claims more quickly and efciently.
Thank you for your cooperation!
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.