Behringer EG2080-RW, EG2080-BK Important Safety And Assembly Instructions

Important safety and

assembly instructions

Version 1.0 December 2006

EUROGRAND EG2080-RW/BK

EG2080 ASSEMBLY

EG2080 OVERVIEW

Important Safety Instructions

V The EG2080 must be assembled before use. A Phillips or slotted screw driver is required to assemble the

parts.

V During assembly make sure you use the correct components and screws and assemble them in the

correct order.

V The piano should be assembled by two persons to avoid injury due to its weight and bulky parts.
V During assembly, make sure you use the correct parts and screws and assemble them in the correct

order.

V Use only screws that are included with the unit for assembly, otherwise the parts might get damaged.
V Insert the screws only into the holes/threads provided for this purpose. It is not necessary to drill additional

holes.

V Be sure that all screws are tightened securely.
V To disassemble the unit, follow the steps in reverse order.
V The illustration below shows the designations of the parts supplied which are required for assembling the

digital piano.

1. Check that you have all of the following items before assembly:

2