Behringer E1520A User manual

User Manual

EUROLIVE
E1520

Processor-Controlled 400-Watt 2-Way PA Loudspeaker/Floor Monitor

/E1220

2 EUROLIVE E1520A/E1220A User Manual

Table of Contents

Thank you .......................................................................2

Important Safety Instructions ...................................... 3

Legal Disclaimer ............................................................. 3

Limited warranty ............................................................ 3

1. Introduction ............................................................... 4

1.1 Before you get started ...................................................... 4

1.1.1 Shipment .......................................................................... 4

1.1.2 Initial operation ............................................................. 4

1.1.3 Online registration ....................................................... 4

2. Control Elements andConnections ......................... 4

3. Application Examples ............................................... 5

3.1 Using a mixing console ..................................................... 5

3.2 Using several E1520A/E1220A loudspeakers............. 5

3.3 Direct connection of a stereo signal source ............. 5

4. Installation ................................................................. 6

5. Specications ............................................................. 6

Thank you

Thank you for the condence you have placed in us by purchasing the BEHRINGER
EUROLIVE E1520A/E1220A speaker. Targeting DJs and presenters, these extremely
robust, high-power loudspeakers oer amazing performance, durability and
portability that have made the series of EUROLIVE loudspeakers so widely used
and appreciated.

3 EUROLIVE E1520A/E1220A User Manual

9. Do not defeat the safety purpose of the polarized

TO BIND MUSICGROUP BY ANY EXPRESS OR IMPLIED

Important Safety Instructions

Terminals marked with this symbol carry
electrical current of su cient magnitude

to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. Allother
installation or modi cation should be performed only
by quali edpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the
enclosure-voltage that may be su cient to constitute a
risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the
accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
quali ed personnel.

Caution

To reduce the risk of  re or electric shock,

do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects  lled with liquids,
suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by quali ed ser vice personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by quali ed
servicepersonnel.

or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not  t into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Use only attachments/accessories speci ed by
themanufacturer.

12. Use only with the
cart, stand, tripod, bracket,
or table speci ed by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to quali ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.

15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.

UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
INCLUDING PHOTOCOPYING AND RECORDING OF ANY
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD.

ALL RIGHTS RESERVED.
© 2013 MUSICGroupIPLtd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands

LIMITED WARRANTY

For the applicable warranty terms and conditions
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
www.music-group.com/warranty.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampli ers) that produce heat.

LEGAL DISCLAIMER

TECHNICAL SPECIFICATIONS AND APPEARANCES
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND
ACCURACY IS NOT GUARANTEED. BEHRINGER,
KLARKTEKNIK, MIDAS, BUGERA, AND TURBOSOUND
ARE PART OF THE MUSIC GROUP MUSICGROUP.COM.
ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.
FULLFILLERSAND RESELLERS ARE NOT AGENTS OF
MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY

4 EUROLIVE E1520A/E1220A User Manual

1. Introduction

With powerful 400 Watts, wide frequency bandwidth and extensive dynamic
range, these sound reinforcement speakers deliver truly impressive sound.
Thepowerful long-excursion drivers crank out big tone in the bottom end and
mid-range, while the state-of-the-art 1" HF drivers deliver crisp and detailed
highs. Each speaker has been optimized for maximum reliabilit y through the
integrated sound processor, ensuring ultimate system control and speaker
protection. The enclosure’s shape not only allows use in an upright position,
but can also be tilted for use as a oor monitor. It also oers a high degree of
durability that can endure even the harshest road conditions.

1.1 Before you get started

1.1.1 Shipment

Your E1520A/E1220A was carefully packed at the assembly plant to assure secure
transport. Should the condition of the cardboard box suggest that damage may
have taken place, please inspect the unit immediately and look for physical
indications of damage.

◊ Damaged equipment should NEVER be sent directly to us. Please inform

the dealer from whom you acquired the unit immediately as well
as the transportation company from which you took delivery.
Otherwise, all claims for replacement/repair may be rendered invalid.

◊ Please always use the original packaging to avoid damage due to

storage or shipping.

1.1.3 Online registration

Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warrantycarefully.

Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contac t
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).

Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.

Thank you for your cooperation!

2. Control Elements
andConnections

◊ Never let unsupervised children play with the E1520A/E1220A or with

its packaging.

◊ Please dispose of all packaging materials in an environmentally

friendly fashion.

1.1.2 Initial operation

Be sure that there is enough space around the unit for cooling. To avoid
overheating, do not place the E1520A/E1220A on top of power amps or near
radiators, etc.

◊ Blown fuses must be replaced by fuses of the same type and rating.

Please refer to the “Specifications” for further details.

The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all international safety certication requirements.

◊ Please make sure that all equipment is properly grounded at all times.

For your own safety, never remove or disable the ground conductor of
the unit or of the AC power cord.

◊ The sound quality may diminish within the range of powerful

broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.

Warning

◊ This loudspeaker is capable of producing extreme volumes. Please keep

in mind that high sound pressures do not only temporarily damage
your sense of hearing, but can also cause permanent hearing damage.
Be careful to select a suitable volume at all times.

(3)

(8)
(7)

(2)

(6)
(5)

(4)

Fig. 2.1: Control elemen ts and connect ions (E1520A and E1220A)

(1) Use this ¼" stereo jack to connect a signal source that has ¼" output.

(2) Use this XLR connector to connect a signal source that has XLR output.

◊ Always use either the XLR or the ¼" jack input, and use the LEVEL

control ( 4 ) to adapt the input sensitivity. Never use both inputs at the
same time!

(3) The LINK OUTPUT is directly connec ted to the inputs of the E1520A/E1220A

and carries the input signal with no processing applied. In this way, youcan
route the signal to the input of another device (for example, a second
E1520A/E1220A).

(4) To set the volume of the LINE or MIC signal, use the LEVEL control. The left

half of the control range is for attenuating the LINE signal. The right half is
for raising the level of the MIC signal.

(1)

(5) The CLIP LED lights up when signal distortion occurs. Reduce the volume

with the LEVEL control until the CLIP LED does not light up any more,
oroccasionally lights up at signal peaks.

5 EUROLIVE E1520A/E1220A User Manual

◊ We would like to draw your attention to the fact that extremely loud

sound levels may damage your hearing as well as your headphones/
loudspeakers. Turn the LEVEL control fully to the left before you switch
on the unit. Be careful to select a suitable volume at all times.

(6) The HIGH control adjusts the level of the high-frequency range.

(7) The PWR LED lights up when the loudspeaker is put into operation.

(8) The LOW control adjusts the level of the low-frequency range.

3. Application Examples

◊ Turn the LEVEL control fully to the lef t before you switch on the unit

with the POWER switch. Then, raise the volume to a suitable level.

3.1 Using a mixing console

A common way to use 2 E1520A/E1220A loudspeakers is with a mixing console.
In this case, connect each of the main outputs that are on the mixing console
to a E1520A/E1220A loudspeaker. The E1520A/E1220A includes XLR and ¼"
connectors. To avoid interference, use only XLR or ¼" jack cables.

3.2 Using several E1520A/E1220A loudspeakers

EUROLIVE E1520A

Input Input

Link Output Link Output

(9)

(10)

(12)

(11)

Fig. 2.2: Cont rol elements and c onnections (E1520A and E1220A)

(9) The mains connection is established using a cable with an IEC mains

connector. This cable is packaged with the E1520A/E1220A. To avoid
ground-loop hum, loudspeakers and mixing consoles should be connected to
the same power circuit.

(10) You can replace fuses at the FUSE SWITCH of the E1520A/E1220A.

Alwaysreplace fuses with the same type. Please follow the instructions
given in chapter 5 “Specications.”

(11) Press POWER to turn on your E1520A/E1220A.

Input

Output L Output R

X2442USB

Fig. 3.1: Wiring several E1520A/E1220A loudspeakers using the LINK OUTPUT connector

Input

For larger rooms, you can connect several E1520A/E1220A speakers using the
LINK OUTPUT connector (3) (see g. 3.1).

3.3 Direct connection of a stereo signal source

When you use two E1520A/E1220A loudspeakers, you can directly connect one
stereo signal source, for example, a CD player. In this case, each of the speakers is
connected to 1 signal-source output. (If necessary, use the appropriate adaptor.)

◊ The POWER switch does not fully disconnect the unit from the mains.

To disconnect the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product, ensure the plug
or appliance coupler is readily operable. Unplug the power cord
completely when the unit is not used for prolonged periods of time.

(12) SERIAL NUMBER.

6 EUROLIVE E1520A/E1220A User Manual

4. Installation

Both audio inputs of the BEHRINGER E1520A/E1220A and the LINK OUTPUT
connector are fully balanced. To maximize interference compensation, try to
establish balanced connections to other equipment, whenever possible.

Balanced ¼" TRS connector

strain relief clamp

sleeve
ring
tip

sleeve

ground/shield

ring

cold (-ve)

tip

hot (+ve)

For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.

Fig. 4.1: ¼" TRS connector

Balanced use with XLR connectors

12

3

input

1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)

1

2

3

output

For unbalanced use, pin 1 and pin 3
have to be bridged

Fig. 4.2: XLR connector

5. Specications

Output Power

Low-Frequency Range

RMS @ 1% THD 200 W @ 8 Ω

Peak power 320 W @ 8 Ω

High-Frequency Range

RMS @ 1% THD 50 W @ 8 Ω

Peak power 80 W @ 8 Ω

Input

XLR Connector (Servo-Balanced)

Sensitivity -40 to +4 dBu

Input impedance 24 kΩ

¼" Jack (Servo-Balanced)

Sensitivity -40 to +4 dBu

Input impedance 24 kΩ

Link Output

XLR Connector

System Data

E1520 A

Frequency range 50 Hz to 20 kHz

Crossover frequency 2 kHz (12 dB)

Maximum sound pressure level 125 dB @ 1 m

Limiter optical

Dynamic Equalizer Processor-controlled

◊ Make sure that only competent personnel install your E1520A/E1220A.

They must be sufficiently earthed during and after the installation
process. Otherwise, electrostatic discharges may negatively affect the
operating characteristics of your equipment.

E122 0A

Frequency range 60 Hz to 20 kHz

Crossover frequency 2.2 kHz (12 dB)

Maximum sound pressure level 124 dB @ 1 m

Limiter optical

Dynamic Equalizer Processor-controlled

7 EUROLIVE E1520A/E1220A User Manual

Equalizer

HIGH 12 kHz / ±15 dB

LOW 80 Hz / ±15 dB

Power Supply

Mains Voltage / Fuses

100 -120 V~, 50/60 Hz T 5,0 A H 250 V

220 -230 V~, 50/60 Hz T 2,5 A H 250 V

Power consumption max. 400 W

Mains connector Standard IEC receptacle

Dimensions / Weight

E1520 A

Dimensions (H x W x D) approx. 25.2 x 18.3 x 19"
approx. 640 x 465 x 485 mm

Weight approx. 58 lbs / 26.3 kg

E122 0A

Dimensions (H x W x D) approx. 585 x 400 x 410 mm

(23 x 15.7 x 16.1")

Weight approx. 22.3 kg (49 lbs)

BEHRINGER i s constantly str iving to maintain the h ighest profess ional standards. A s a result of these e ffort s,
modific ations may be made f rom time to time to exi sting product s without prio r notice. Specif ications and
appearance m ay differ fro m those listed or illus trated.

We Hear You