BECKHOFF KL1154 User Manual

Data sheet for KL1154 and KL1164, Version 1.0

Digital Input

Signal LED1

Signal LED2

Signal LED3 Signal LED4

Input 1

Input 2

+24 V

Power contact +24 V

0 V

Power contact 0 V

Input 3

Input 4

5

1

6

2

7

3

positive negative

8

4

2-wire

Contact assemblyTop view Connection

3-wire

KL1154, KL1164 | 4-channel digital input terminal 24 V DC,
switching to positive and negative potentials

The KL1154 and KL1164 digital input terminals acquire the binary control signals from the process level and transmit them, in an electri­cally isolated form, to the higher-level automation unit. The KL1154 and KL1164 versions have input fi lters of different speeds. Sensors that
switch to the positive potential or to 0 V (ground) can be connected to the KL1154 and KL1164 versions. The Bus Terminals contain four
channels that indicate their signal state by means of light emitting diodes.

Technical data KL1154 KL1164

Number of inputs 4

Nominal voltage 24 V DC (-15 % /+20 %)

“0” signal voltage 7.6 V … 17.4 V (at 24 V DC)

“1” signal voltage

Input fi lter

Input current typ. 5 mA

Current consump. from K-bus typ. 8 mA

Electrical isolation 500 V

Bit width in the process image

Confi guration no address or confi guration settings

Weight approx. 55 g

Operating /storage temperature

Relative humidity 95 %, no condensation

Vibration / shock resistance conforms to EN 60068-2-6 / EN 60068-2-27/ 29

EMC resistance burst / ESD conforms to EN 61000-6-2 / EN 61000-6-4

Protect. class / installation pos. IP 20 / variable

Beckhoff™ and TwinCAT™ are registered trademarks of Beckhoff. Information is subject to change without notice and warranted only to the extent agreed in the

terms of contract. Beckhoff Automation GmbH, Eiserstr. 5, 33415 Verl, Germany, Phone: [phone], Fax.: [phone], http://www.beckhoff.com

0 V … 7 V and 18 V … 30 V (at 24 V DC)

3.0 ms 0.2 ms

(K-bus / fi eld potential)

rms

4 inputs

0 °C … +55 °C/-25 °C … + 85 °C