Baby Lock BLPS Instruction Manual



Step 1 - Download the Pro-Stitcher

Update File

1.1 Insert a USB flash drive into a computer

that is connected to the Internet.

1.2 Go to www.babybock.com/Downloads
and find the Pro-Stitcher update. Click
the link and either save it directly to the
USB flash drive or allow your computer to
save the file to a default directory (such

as C:\Documents and Settings\user\My
Documents\Downloads). Do NOT choose

the RUN option if you are ever prompted
to RUN the program. If you do not save
directly to the USB flash drive, you will
need to find the folder where the file is
saved and copy it from that folder to your
USB flash drive.

Instructions for Installing

the Pro-Stitcher Update

10/16/2012

For updating from version 12.08.0015 or newer

Step 2 - Install the Pro-Stitcher

update

2.1 Plug the USB flash drive into an open USB

port on the Pro-Stitcher computer.

2.2 If the Pro-Stitcher computer is powered
off, skip to step 2.3. Otherwise:

A. Wait about 20 seconds after inserting

the USB flash drive for Windows to
finish setting up the USB flash drive.

B. Select Design -> File -> Update.

HINT: Instead of left-clicking on the link,

right-click the link and select either “Save
Target As” (for Internet Explorer users) or
“Save Link As” (for Google Chrome
users). You can then choose to save the
file directly to your USB flash drive instead
of the default Downloads folder.

C. Locate the update file on the USB drive,

select it and press Run.

D. Skip ahead to step 2.4.

Visit http://www.babylock.com Instructions – Installing Pro-Stitcher Update 1

Instructions for Installing



2.3 If the Pro-Stitcher computer is powered
off:

A. Turn on the Pro-Stitcher computer.

B. As the Pro-Stitcher software begins

to load, it will recognize the update
file and begin installation.

2.4 Follow the on-screen instructions to
install the update file

the Pro-Stitcher Update

10/16/2012

For updating from version 12.08.0015 or newer

2.5 The Pro-Stitcher software will
automatically begin when the installation is
complete.

If there are any problems installing
the update as described above,
please refer to steps 3.2, and 3.7-

3.13 of the installation manual for
those running version 3.0.03, to
manually locate the installation file
(ignoring references to Art & Stitch)
and run the file from the Windows
File Explorer window.

Visit http://www.babylock.com Instructions – Installing Pro-Stitcher Update 2