MIGRATION GUIDE
Use this guide to change your commands for the Monarch® Sierra Sport2™ 9460™ NP
printer to the Monarch® Sierra Sport2™ 9460™SNP printer. The print server is different
in the NP and SNP printers, so commands may vary slightly.
This guide lists the NP printer default settings, serial communication settings, and
console commands with their SNP equivalents (if applicable).
Information in this document supercedes information in previous versions. Check our Web
site (www.paxar.com) for the latest documentation and release information.
Printer Defaults
The following table lists the radio frequency (RF) defaults for the NP and the SNP
printers.
Function Default
SSID search mode
Security disabled
IP Addressing DHCP
Application Connectivity Raw data on Port 9100
Keep Alive Time 1 minute
Connection Timeout 0 minutes
Power save mode on Radio Card PSP Level 3
Console password access
Serial Communications Defaults
The following table lists the direct serial communications defaults for the NP and the SNP
printers.
Function Default
Baud Rate 19200
Parity None
Data Bits 8
Stop Bits 1
Flow Control RTS/CTS
Monarch®, Sierra Sport2, and 9460 are trademarks of Paxar Americas, Inc.
Paxar® is a trademark of Paxar Corporation.
Avery Dennison® is a trademark of Avery Dennison Corporation.
TC9460MG Rev AD 12/07 ©2007 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
All Rights Reserved.
Conventions
This guide uses the following conventions. You must have a basic understand of Telnet to
proceed.
KEYwords
Type the capitalized letters of each keyword instead of the whole
keyword. Some keywords require more capitalized letters than
others. For example,
SEt
KEYVAL
Radio
[options]
Mutually-exclusive options are included within square brackets
and separated by a forward slash. Select only ONE of the
options. For example, [DISable/STRICT/FLEXible]
<values>
Values are included within brackets. Values that contain spaces
(multiple words) must be enclosed within quotation marks ("").
For example,
SEt NW PW <value>
SEt NW PW "Store 876"
n
Numeric digits are indicated by the letter (n). For example,
SEt IP BOot n
SEt IP BOot 5
SEt NW CHannel nn
SEt NW CHannel 11
Telnet Console Commands
These tables list the NP commands and their SNP equivalents (if applicable).
General Commands
This table lists the general NP commands and their SNP equivalents.
9460NP Command 9460SNP Command Equivalent
EXIT EXIT
HELP HElp
INIT INIT
SAVE SAVE
SEt CONSole TImeout n No equivalent
SEt DEFAULT SEt DEFAULT
PIng <aaa.bbb.ccc.ddd> SEt IP PIng <aaa.bbb.ccc.ddd>
2