AVer Dome Installation Guide

AVer Dome type Camera
Installation Guide
Table of Contents
DEPLOYING NETWORK ........................................................................................................ 4
Network Connection via Ethernet Switch .................................................................... 4
Connect the power adapter to power jack of camera .................................................. 4
Power over Ethernet Connection ................................................................................ 5
CONNECTING EXTERNAL DEVICES TO I/O TERMINAL BLOCK .................................................... 6
INTERNAL CONNECTION DIAGRAM OF DI/DO ......................................................................... 6
MOUNTING THE IP CAMERA ................................................................................................. 7
FOCUSING THE IP CAMERA WITH BNC MONITOR ................................................................... 8
INSERTING MICROSD CARD TO SYSTEM ................................................................................ 9
FD2020/FD2020-M .......................................................................................... 11
FD3020 / FD3020-M ........................................................................................ 14
GOVERNING LAW AND YOUR RIGHTS .......................................................................... 19
ENGLISH
Do not use power supply with different voltage other than DC 12V / PoE.
Do not submerge the unit in the water.
Unplug the power of this unit as soon as smoke or unusual odor is detected.
Unplug the power supply before cleaning. Use only a lens cleaning cloth and never use benzene, thinner, or other solvent for cleaning.
Do not attempt to service this unit by yourself. Always refer all servicing to qualified service personnel.
Do not place the unit in unsteady surface and also do not drop the unit.
Keep the IP camera housing close and prevent the dust from getting in the housing.
Important Safeguard
1
AVer Dome type Camera
Software & Manual CD
L-type Wrench
Alignment Sticker
4 Screws
4 Plastic Anchors
Power Adapter (12V, 2A)
* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.
Package Contents
The following items are included in the package.
Optional Accessories
2
ENGLISH
No.
Function
(1)
Camera Lens
(2)
Light Sensor
(3)
Power Jack
(4)
BNC Jack (Video Out)
(5)
RJ45 Ethernet Jack
(6)
I/O Terminal Block
(7)
Phone Jack (Audio In)
(8)
Phone Jack (Audio Out)
IP Camera Parts
3
IP Camera Installation
This section provides useful tips on how to adjust the IP camera to meet your needs.
Deploying Network
Network Connection via Ethernet Switch
Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera
Connect the power adapter to power jack of camera
4
ENGLISH
Power over Ethernet Connection
AVer dome type camera fully complies with PoE standard. It allows you to use PoE enabled switch or PoE injector to transmit data and power thru single Ethernet cable.
PoE Enabled Switch Connection Diagram
PoE Injector Connection Diagram
5
Loading...
+ 14 hidden pages